User Manual
17
1
Getting Started
Turning the Flash On and O
Use the power switch to turn the ash on or o .
Turning the Flash On
To turn the ash on, rotate the power switch to ON, or hold
the power switch latch and rotate the switch to REMOTE or
MASTER.
• Choose ON to use the unit as a stand-
alone ash mounted on the camera
hot shoe.
• Choose REMOTE to use the unit as a re-
mote ash controlled via FUJIFILM
optical remote ash control. Use
the supplied mini stand to orient
the unit with the receiver facing the
master ash.
• Choose MASTER if the unit will be
mounted on the camera hot shoe
for use as a master ash controlling
remote ash units via FUJIFILM opti-
cal remote ash control.