User Manual

19
1
Getting Started
Turning the Flash On and O
The LCD Backlight
The LCD display backlight turns on when controls are used,
and remains on for about 15 seconds. The backlight lights
green in single  ash and master modes, amber in remote
mode, and red when a temperature warning (
P
95) is
displayed.
You can adjust display contrast (
P
82), disable the
backlight, or choose how long the backlight remains on
(
P
83).
The D (Lock) Button
To disable all controls other than the power switch and
power switch latch, press and hold the SETUP/D (lock) but-
ton. To re-enable the controls, press and hold the button
again.
Turning the Flash O
To turn the  ash o , rotate the power
switch to OFF. The ready lamp will turn
o . Settings are stored while the  ash
is o .