User Manual

23
2
Flash Controls
Bounce Lighting
The  ash head can be tilted so that the light from the
 ash is re ected from a ceiling or wall for softer, more
natural lighting or to illuminate the area behind your
subject.
The  ash head can be tilted by as
much as 90° up, 10° down, 135° left,
and 180° right. The head locks at 0°
and 90° up; when moving it up or
down from these positions, keep the
bounce latches on the sides of the
 ash head pressed. The bounce status indicator ( or )
is displayed while bounce lighting is in e ect.
O
The  ash may not adequately light the subject if the distance
between the unit and the re ective surface is too great. If the
image is underexposed, try choosing a lower f-number (larger
aperture) or higher ISO sensitivity.
The light from the  ash may take on the color of the surface
from which it is re ected.
Photographing Nearby Subjects
Tilt the  ash head down 10° when photo-
graphing nearby subjects.
10°
10°
180° 135°
90°