User Manual

49
Wireless Flash Photography
4
Remote Flash Units
Follow the steps below to con gure the unit for use
as a remote  ash. You can use controls on remote
units to choose the group (
P
50) and channel
(
P
52) and make individual adjustments to  ash
compensation or output (
P
51).
1
Hold the power switch latch and
rotate the switch to REMOTE.
2
Use the supplied mini stand to
orient the unit with the receiver
facing the master  ash.
Receiver
Mini stand
N
Remote  ash units are automatically set to the same  ash
mode as the master  ash.