User Manual

87
Setting Save, Load, and Reset
7
Saving Settings
Changes to settings can be saved for later recall.
1
Adjust settings as desired (
P
81).
2
Press the SETUP button to display the setup menu.
3
Press the g function but-
ton.
4
Rotate the command dial to high-
light a slot and press OK to select
(to exit to the setup menu without
saving settings, select CANCEL).
5
A con rmation dialog will be dis-
played; rotate the command dial
to highlight OK and press the OK
button. A progress dialog will be
displayed, followed by the setup
menu with current settings saved.
N
To change settings already saved to a given slot, repeat Steps
1–5, taking care in Step 4 to choose the slot to which the set-
tings were saved.