Getting Ready Using the Camera Advanced Features • Photography • Playback • Movie Settings OWNER’S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix F480 / FinePix F485 correctly. Please follow the instructions carefully.
Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in Canada For customers in the U.S.A. This Class B digital apparatus complies with Canadian ICES-003. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with Part 15 of the FCC Rules.
IMPORTANT NOTICE BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT, SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM. BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY THIS AGREEMENT.
EC Declaration of Conformity We Name: Address: FUJIFILM Europe GmbH Heesenstrasse 31 40549 Dusseldorf, Germany declare that the product Product Name: FUJIFILM DIGITAL CAMERA FinePix F480 / FinePix F485 Manufacturer’s Name: FUJIFILM Corporation Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN conforms to the following Standards: Safety: EN60065: 2002 EMC: EN55022: 2006 Classe B EN55024: 1998 + A1: 2001 + A2: 2003 EN61000-3-2: 2000 + A2: 2003 following the provision of the EMC
Disposal of Electric and Electronic Equipment in Private Households Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
Contents Warning................................................................. 2 IMPORTANT ......................................................... 3 EC Declaration of Conformity................................ 4 Disposal of Electric and Electronic Equipment in Private Households ......................................... 5 Contents................................................................ 6 About this Manual ................................................. 8 Accessories Included .................
Protecting the images ([ PROTECT])...... 67 Copying the images ([ COPY])................ 68 Rotating the images ([ IMAGE ROTATE]) ............................. 71 Trimming the images ([ TRIMMING]) ...... 72 Advanced Features — Movie r Recording Movies .......................................... 74 Set the camera to r Movie mode.............. 74 Record movies ............................................ 75 w Playing Back Movies ..................................... 76 Settings [ SET-UP]....................
About this Manual Z About marks CAUTION This mark denotes issues that may affect the camera’s operation. CHECK This mark denotes points to notice in the camera’s operation. MEMO This mark denotes additional topics that complement the basic operating procedures. Z Usable Memory Cards You can use the xD-Picture Card, the SD Memory Card and the SDHC Memory Card with the FinePix F480 / FinePix F485. In this Owner’s Manual, these cards are expressed as “Memory Card”.
Accessories Included Make sure that all the below accessories are included. Note that accessories may vary depending on model. • CD-ROM (1) Software for FinePix • Rechargeable Battery NP-40N (1) NP -4 0N \ • Strap (1) • Owner’s Manual (this manual) (1) • Notes and Cautions (1) Attaching the strap • Battery Charger BC-40N (1 set) Attach the strap as shown in 1 and 2. When attaching the strap, move the fastener to adjust the length and slightly away from the end of the strap, as shown in figure 1.
Camera Parts and Features • Refer to the pages in parentheses for information on using the camera parts or features. A Shutter button B POWER button C Self-timer lamp (p.52) D Speaker E Microphone F Flash (p.49) G Zoom switch (p.26, 33) H Lens (Lens cover) I n/j Low light view button (p.53)/ Erase button (p.36) J Strap mount K Mode dial L q/d Flash button (p.49) M w (Playback) button N Battery cover O Battery compartment P Memory Card slot (p.16) Q ; USB socket A/V OUT (Audio/Visual output) socket (p.
Example of LCD Monitor Text Display Z Photography mode A ( Self-timer (p.51) B e Macro (close-up) (p.48) C C Flash (p.49) D s Photography mode (p.41) E Battery level indicator (p.22) F AF frame (p.26) G Date/Time (p.20) H 9 White balance (p.60) I f Continuous shooting (p.61) J iN Quality mode (p.57) K Number of available frames (p.122) L ISO 100 Sensitivity (p.57) M { AF warning (p.107) N | Camera shake warning (p.107) O Increasing monitor brightness (p.53) P Y Internal memory (p.
Charging the Battery The battery is not fully charged at shipment and must be fully charged before being used. 1 Z Compatible battery Rechargeable Battery NP-40N (1) Set the battery correctly as indicated by the polarity icon. Rechargeable Battery NP-40N NP -4 0N Indicator Load the battery into the battery charger BC-40N. Terminals CAUTION • The battery is not fully charged at shipment and must be fully charged before being used.
Plug the battery charger into a power outlet. The charging indicator lights orange and charging begins. When charging is completed, the indicator turns off. Charging completes after about 2 hours. CAUTION • Unplug the battery charger from the power outlet when it is not in use. • If the terminals of battery are soiled, it may not be possible to charge it. Clean the battery terminals and battery charger terminals with a clean, dry cloth. • Charging times increase at low temperatures.
Loading the Battery Battery is required to operate the digital camera. At first, load the battery in the camera. 1 Open the battery cover. 2 Load the battery. Make sure that the indicators are aligned. Push the battery release catch aside while loading the battery. Check that the battery is firmly held in place. Battery release catch CHECK Check that the camera is turned off before opening the battery cover. Indicator CAUTION • Do not open the battery cover while the camera is on.
Close the battery cover. Getting Ready 3 MEMO If you want to use the camera powered by AC, the AC power adapter, AC-5VX, and DC coupler, CP-40N (both sold separately), are necessary. Refer to the manual provided with the AC-5VX and CP-40N for instructions.
Loading the Memory Card Although you can store pictures in the camera’s internal memory, you can store many more images on the Memory Card (sold separately). You can use the xDPicture Card and the SD Memory Card with the FinePix F480 / FinePix F485. In this Owner’s Manual, these cards are expressed as “Memory Card”. 2 Insert a Memory Card. (xD-Picture Card) SD Memory Cards/SDHC Memory Cards They are operation-checked at FUJIFILM Corporation.
CAUTION Protection switch 3 Close the battery cover. Getting Ready Be sure to unlock the protection of the SD Memory Card before inserting it. If it is locked, recording/deleting images, as well as formatting are not available. To unlock the protection, slide the switch back, and the SD Memory Card will work normally. How to replace the Memory Card CAUTION • A new SD Memory Card or a card previously used on a PC or any device other than the camera should be formatted (➝p.84) on the camera before use.
Loading the Memory Card CAUTION • When storing Memory Cards, make sure that they are kept out of the reach of children. A Memory Card could be swallowed and cause suffocation. If a child swallows a Memory Card, seek medical attention or call emergency number right away. • If the Memory Card is oriented incorrectly, it will not go all the way into the slot. Do not apply force when inserting a Memory Card.
Turning On and Off Press POWER down fully to turn the camera on. Press POWER again to turn the camera off. MEMO Changes between Photography mode and Playback mode Turning the camera on in Playback mode Press w for about 1 second to turn the camera on in Playback mode. Press w during playback to turn the camera off. Getting Ready Turning the camera on in Photography mode MEMO To change to Photography mode, press the shutter button down halfway. Press w during shooting to change to Playback mode.
Turning On and Off Setting the language, date, and time 2 Set the date and time. DATE / TIME NOT SET When using the camera for the first time after purchasing, the language, date, and time are cleared. Set the language, date, and time. 1 YY.MM.DD [ ] screen appears when turning the camera on. SET 1. 1 12:00 AM NO A Press p or q to select Year, Month, Day, Hour, or Minute. START MENU / LANG. B Press n or o to correct the setting. SET NO MEMO A Press n, o, p, or q to select the language.
MEMO Change the date format. DATE / TIME NOT SET DD . MM . YY MM / DD / YY 12 / 1 / 2007 YY . MM . DD SET 10:00 AM NO A Press p or q to select the date format. START MENU screen also appears when the batteries have been removed and the camera has been left for a long period. Once the AC power adapter has been connected or the batteries have been installed for 30 minutes or more, the camera settings will be retained for roughly 2 hours even if both sources of power are removed.
Turning On and Off Checking the battery charge Turn the camera on and check the battery level indicator on the LCD monitor. A There is ample battery charge. (Lit white) B The battery is almost half charged. (Lit white) C There is insufficient charge left in the battery. The battery will soon run out. Have a charged battery ready. (Lit red) D The battery is depleted. The display will shortly go blank and the camera will stop working. Replace the battery.
Correcting the Date and Time 2 Open the [SET-UP] menu. SET - UP SHOOTING MENU ISO QUALITY Display the [DATE/TIME] screen. Getting Ready 1 AUTO DATE / TIME BEEP VOLUME SHUTTER VOLUME PLAYBACK VOLUME LCD BRIGHTNESS N SET-UP A Press MENU/OK to open the menu. A Press p or q to select B Press n or o to select [ B Press o to move to menu item. C Press q. SET-UP]. C Press n or o to select [ . DATE/TIME]. D Press q. See “2 Set the date and time. ” (➝p.20).
Selecting the Language 1 2 Open the [SET-UP] menu. SHOOTING MENU ISO QUALITY Display the [ ] screen. SET - UP AUTO N FORMAT / LANG. AUTO POWER OFF TIME DIFFERENCE VIDEO SYSTEM SET-UP ENGLISH 2 MIN NTSC A Press MENU/OK to open the menu. A Press p or q to select B Press n or o to select [ B Press o to move to menu item. C Press q. SET-UP]. . C Press n or o to select [ D Press q. See “1 [ ] screen appears when turning the camera on. ” (➝p.20). 24 ].
Taking Pictures (AUTO Mode) This section describes the basic operations. Holding the camera correctly 1 Turn the camera on. Brace your elbows against your sides and hold the camera with both hands. Using the Camera A Press POWER down fully to turn the camera on. Do not cover the lens or flash with your fingers. B Set the Mode dial to q. CAUTION • Moving the camera while shooting gives a blurred picture (camera shake). Hold the camera steadily with both hands.
Taking Pictures (AUTO Mode) 2 Check the composition on the LCD monitor. To adjust zoom scale using the Zoom switch: ] wide zoom (Zoom out) 3 Focus on the main subject in the AF frame and press the shutter button down halfway. [ tele zoom (Zoom in) AF frame Zoom bar Halfway pressed AF frame becomes smaller and camera focuses on the subject. CHECK • Focal range Approx. 40 cm (1.3 ft.) to infinity • Optical zoom focal length (35 mm camera equivalent) Approx. 28 mm to 112 mm • Max.
CAUTION When pressing the shutter button halfway, a lens operation sound may be heard. When pressing the shutter button down halfway, b appears on the LCD monitor before the flash fires. Press the shutter button fully. Double beep Click 250 F4.2 Using the Camera 4 Flash Change the flash mode when you want to take pictures without flash. See p.49 for information on flash.
Taking Pictures (AUTO Mode) Z Indicator lamp display The indicator lamp lights or blinks when pressing the shutter button, etc. The indicator lamp shows the camera status.
Taking pictures with the focus and exposure locked 1 Move the camera slightly so that one of the subjects is in the AF frame. 2 Press the shutter button down halfway to focus on the subject. Using the Camera In the above composition, the subjects (two people in this case) are not in the AF frame. Pressing the shutter button halfway at this point will result in the subjects being out of focus.
Taking Pictures (AUTO Mode) 3 Continue to hold the shutter button down halfway. Move the camera back to the original image and press the shutter button fully. Subjects not suitable for autofocus FinePix F480 / FinePix F485 uses a high-precision autofocusing mechanism. However, it may have difficulty focusing on the following: Click 250 F4.2 Very shiny subjects such as a mirror or car body Fully pressed MEMO • AF/AE lock can be applied repeatedly before the shutter is released.
Adjusting the shot composition Select the LCD monitor display. Press DISP/BACK to change the LCD monitor display. Best framing Using the Camera Position the main subject at the intersection of two lines in this frame or align one of the horizontal lines with the horizon. Use this frame as a guide to the subject’s size and the balance of the shot while composing a shot. MEMO Always use AF/AE lock when composing a shot. The image may be out of focus if AF/AE lock is not used.
Viewing the Images Play back your images to check them. For important photographs, always take a test shot and view the image to make sure that the camera is working normally. Select the LCD monitor display. Press DISP/BACK during Playback mode to change the LCD monitor display. Setting the camera to Playback mode Press w during shooting to change to Playback mode. 100 - 0001 N ISO 100 When the camera is off, press w for about 1 second to turn the camera on in Playback mode.
Single-frame playback 1 Zoom in / Zoom out. To zoom in an image during single-frame playback: ] wide zoom (Zoom out) 12 / 31 / 2050 250 F4.2 [ tele zoom (Zoom in) 10:00 AM -1 2 3 Using the Camera 100 - 0001 N ISO 100 Playback zoom To select the required image: Press p: last image Press q: next image Zoom bar Selecting images To select images on the thumbnail lists screen, hold down p or q for 1 second during playback. When releasing p or q, camera returns to singleframe playback.
Viewing the Images 2 Display another part of the image. Multi-frame playback Multi-frame playback screen (9 frames) appears on the LCD monitor. Select required frame from the 9 frames. Navigation screen (Current displayed image) Press n, o, p, or q to display another part of the image. Z Zoom scales Quality mode Max. zoom scale i (3264 × 2448 pixels) Approx. 5.1× % (3264 × 2176 pixels) Approx. 5.1× 4 (2304 × 1728 pixels) Approx. 3.6× 2 (1600 × 1200 pixels) Approx. 2.
Sorting by date In sorting by date mode, you can view all images taken on the same day. 12 / 29 12 / 30 12 / 31 2050 12 / 29 12 / 30 12 / 31 12 Using the Camera 2050 Selecting the date 1 / 12 A Press n, o, p, or q to move the cursor (colored frame) to the selecting frame. A Press n, o, p, or q to move the cursor (colored frame) to on the upper left frame. B Press p to display the selecting date. B Press MENU/OK to enlarge the image.
Erasing the Images/Movies Use this mode to erase unnecessary images or movies to have ample free space on the Memory Card or internal memory. Your camera calls images “frames”. Using the erase button ( Pressing Setting the camera to w Playback mode (➝p.32) Erasing the images using [PLAYBACK MENU] /n) (n) erases images easily. PLAYBACK MENU ERASE SLIDE SHOW PRINT ORDER (DPOF ) ERASE OK? PROTECT COPY OK CANCEL A Press MENU/OK to open the [PLAYBACK MENU].
Setting the camera to w Playback mode (➝p.32) PLAYBACK MENU Erasing one frame at a time ([FRAME]) ERASE BACK SLIDE SHOW FRAME PRINT ORDER (DPOFALL ) FRAMES ERASE OK? Using the Camera PROTECT COPY YES D Press n or o to select [FRAME] or [ALL FRAMES]. CANCEL A Press p or q to select the erasing frame (file). E Press MENU/OK to confirm the setting. B Press MENU/OK to erase the currently displayed frame (file). MEMO To erase another frame (file), repeat above steps.
Erasing Erasing thethe Images/Movies Images/Movies Erasing all frames ([ALL FRAMES]) ERASE ALL OK? IT MAY TAKE A WHILE YES CANCEL Press MENU/OK to erase all the frames (files). MEMO Press DISP/BACK to cancel erasing of all the frames (files). Some unprotected frames (files) will be left unerased. CANCEL 38 Setting the camera to w Playback mode (➝p.32) MEMO • When using a Memory Card, the images in the Memory Card are erased. When not using a Memory Card, the images in the internal memory are erased.
Using the Photography Functions — Procedure of Setting Specify the camera settings for taking pictures to get the best result. A general guide is given below. 1 Select the Photography mode. Specify the photography settings. Pressing buttons or selecting menu allows you to specify photography functions. You can obtain the best result for shooting. Z Specifying functions using buttons e Macro Used for close-up shots (➝p.48). d Flash Used for shots in dark locations or for backlit subjects, etc. (➝p.
Using the Photography Functions — Procedure of Setting Z Specifying functions using [SHOOTING MENU] (MENU/OK button) [ ISO] Use to specify required sensitivity setting (➝p.57). [ QUALITY] Use to specify required image size (➝p.57). [ EXP. COMPENSATION] Use this setting to obtain the correct exposure (only s) (➝p.59). [ WHITE BALANCE] Use to adjust the color tone (only s) (➝p.60). SHOOTING MENU SCENE POSITION ISO QUALITY EXP.
Setting the Shooting Mode You can select the most suitable setting according to the subject by selecting one of the Shooting modes. Turn the mode dial and select the shooting mode. Z Selecting Scene position setting (? Scene Position) Photography functions: * [q AUTO] (➝p.43) * [ BABY MODE] (➝p.43) *[ PICTURE STABILIZATION] (➝p.43) * [b RED EYE REDUCTION] (➝p.43) *[ DIGITAL ZOOM] (➝p.43) * [m PORTRAIT] (➝p.44) * ? Scene Position CHECK , A Set the Mode dial to ?.
Setting the Shooting Mode MANUAL LANDSCAPE SPORT NIGHT Clear scenic shots SET CANCEL B Press MENU/OK to open the menu. C Press n or o to select [ POSITION]. SCENE D Press q. E Press n or o to select the setting. F Press MENU/OK to confirm the setting.
Shooting Mode Setting the mode (➝p.41) CAUTION This section describes the available shooting modes. Note that the availability of a shooting mode and its setting method may vary depending on the mode you wish to use. (➝p.41) Flash fires automatically. Do not use this mode at situations where the flash cannot be used. MEMO [AUTO] [ BABY MODE] This function is suitable for taking pictures of young children. This mode C suppresses the flash so that you can take their picture with a natural ambience.
Shooting Mode CAUTION • Using the DIGITAL ZOOM allows you to enlarge your subject and shoot it. However, it will lower your image quality. Set the DIGITAL ZOOM when requiring it. • When using DIGITAL ZOOM, an increasing ‘speckling’ effect might be observed in the LCD monitor. • DIGITAL ZOOM is different from [ DIGITAL ZOOM] (➝p.82) selected in [ SET-UP] menu. With DIGITAL ZOOM, optical zoom adjustment is available but digital zoom adjustment is not available.
Setting the mode (➝p.41) [ NATURAL LIGHT] CHECK Flash cannot be used in the Natural light mode. [ BEACH] Use this mode to prevent darkening images and provide crisp, clear shots, when shooting at beach under strong sunlight. [ SNOW] Use this mode to prevent darkening images and provide crisp, clear shots, when shooting at snowy scene where the whole screen appears white.
Shooting Mode Setting the mode (➝p.41) Z Selecting the exposure time setting 124 4.0" [ FLOWER] Use this mode to take clear close-up shots when zooming up a flower. It is effective for taking more vivid shots of flower petal. CHECK Press p or q to select the exposure time. [ SUNSET] Use this mode to shoot sunset, making the colors more vivid. 46 • Flash cannot be used in the Flower mode. • Focal range Wide angle: Approx. 5 cm to 2 m (1.9 in. to 6.6 ft.) Telephoto: Approx. 30 cm to 2 m (11.8 in.
Setting the mode (➝p.41) [ PARTY] [ TEXT] Use this mode to shoot documents and white board. It is effective for taking clearer shots of letters. CHECK [ MUSEUM] Use this mode for taking pictures in places such as museum where the use of flash and making an operation sound and a shutter sound are restricted. Flash mode is forcibly set to Suppressed flash and operation sound, shutter sound and the self-timer lamp are off. Focal range Wide angle: Approx. 5 cm to 2 m (1.9 in. to 6.6 ft.
e Macro (Close-up) Use this mode to take close-up shots. Available Photography modes: s, AUTO, , (➝p.43, 45, 46, 47) CHECK , , Press e (p) to select Macro mode. Press e (p) again to cancel Macro mode. , • Focal range Wide angle: Approx. 5 cm to 80 cm (1.9 in. to 2.6 ft.) Telephoto: Approx. 30 cm to 80 cm (0.9 ft. to 2.6 ft.) • Effective flash range Approx. 50 cm to 80 cm (1.6 ft. to 2.6 ft.) MEMO AUTO 48 4 e appears on the LCD monitor indicating that you can take close-up shots.
d Setting the Flash Flash photography is useful for taking pictures at night or indoor dark locations. Choose from 6 flash modes according to the type of shot. See p.50 for information on the available Photography modes. [b RED EYE REDUCTION] This mode is suitable for shooting portraits in low-light conditions. Use this mode to minimize red-eye (eyes appear in red in the finished photo). When using the flash to take a picture of people in lowlight conditions, eyes may sometimes appear red in the picture.
d Setting the Flash [c SLOW SYNCHRO], [n RED EYE & SLOW] This mode allows you to take pictures of people at night that clearly show both your subjects and the night time backdrop. To prevent camera shake, always use a tripod. Using n synchronizes Red-eye reduction mode. Using 8 selects slow shutter speeds of up to 3 seconds.
* Self-Timer The self-timer is used in situations where the photographer is included in the shot. When photographer is away from the camera, use a tripod to prevent camera fall. Available Photography modes: All (➝p.43-47) Setting self-timer 1 Press the shutter button down halfway to focus on the subject and press the shutter button fully. Double beep Halfway pressed AUTO 4 OFF The last displayed setting is the selected mode. : The picture is taken after 10 seconds.
* Self-Timer 2 Take pictures in selected time. A picture is taken after the self-timer lamp changes from lit to blinking (only blinks with the 2-second selftimer). Using the 2-second self-timer This is useful when you worry about camera shake even if attaching the camera on a tripod. MEMO • To stop the self-timer, once it has started running, press DISP/BACK.
j Increasing Monitor Brightness Use this function to increase the brightness of the LCD monitor temporarily when you have difficulty seeing the monitor in low-light conditions or in daylight. Increasing the LCD monitor brightness AUTO 124 blinks on the LCD monitor when the function is on. • This function is automatically canceled after each shot. • When this function is active, it will increase the amount of speckling in images on the LCD monitor.
Using [SHOOTING MENU] Use the [SHOOTING MENU] to adjust image quality. You can take pictures in a wide range of conditions. SHOOTING MENU SCENE POSITION Setting the [SHOOTING MENU] AUTO ISO QUALITY EXP. COMPENSATION SHOOTING MENU SCENE POSITION ISO QUALITY WHITE BALANCE M AUTO N C Press q. EXP. COMPENSATION WHITE BALANCE AUTO A Press MENU/OK to open the [SHOOTING MENU]. D Press n or o to change the setting. E Press MENU/OK to confirm the setting. B Press n or o to select the menu.
Z List of [SHOOTING MENU] options Menu Functions Factory default Settings [ SCENE POSITION] (➝p.41) This setting can be used when the Mode dial is set to ?. Use this setting to provide the best photography menu setting for the scene being shot. [ ISO] (➝p.57) Specifies required sensitivity setting of the ambient light around the subject. The larger value of the sensitivity, the higher sensitivity is obtained. The higher sensitivity settings will allow you to take pictures in darker locations.
Using [SHOOTING MENU] MEMO Note that the shooting menu will vary depending on the selected shooting mode. • When shooting mode is set to q, , , , m. • When shooting mode is set to ,, ., 8, , , , , , , , , (mode dial set to ?). SHOOTING MENU SHOOTING MENU ISO QUALITY CONTINUOUS SET - UP AUTO N OFF SHOOTING MENU SCENE POSITION SCENE POSITION ISO QUALITY CONTINUOUS SET - UP 56 • When shooting mode is set to s (mode dial set to ?). AUTO N OFF ISO QUALITY M AUTO N EXP.
[SHOOTING MENU] Changing the sensitivity setting ([ ISO]) CHECK Settings [AUTO]/[800]/[400]/[200]/[100] Selecting [AUTO] as the sensitivity setting, the camera selects the best sensitivity setting for the subject’s brightness. The selected sensitivity setting appears on the M 124 ISO 100 LCD monitor when the sensitivity setting is set to another setting excluding [AUTO]. Changing the quality setting ([ QUALITY]) Use this menu to specify the image size (number of recorded pixels).
[SHOOTING MENU] Area shot and quality setting Area shot excluding % AUTO N 4 Area shot with % AUTO 4 Normal shooting provides an aspect ratio of 4:3 and % shooting provides an aspect ratio of 3:2 (same aspect ratio as 35 mm film and post card). MEMO • The bigger the number of recorded pixels, the better the image quality becomes. As the number of recorded pixels becomes smaller, you will be able to record more frames to a Memory Card.
Adjusting exposure compensation ([ EXP. COMPENSATION]) Guide to compensation • Backlit portraits: +2/3 EV to +1 2/3 EV Available Photography mode: s (➝p.47) EXP.
[SHOOTING MENU] Setting the menu (➝p.54) Adjusting color balance ([ WHITE BALANCE]) Available Photography mode: s (➝p.47) Adjust the color balance based on white to suit the color of the ambient light around the subject.
Taking pictures continuously ([ CONTINUOUS]) Use this mode to take pictures of a moving subject. Available Photography modes: s, AUTO, , m, ,, ., 8, , , , , , , STORING SHOOTING MENU CONTINUOUS TOP 3 OFF , , Shooting continues as long as holding the shutter button down. This mode shoots up to 3 frames (max. 0.6 frames/ sec.). CAUTION MEMO • Number of available frames is limited depending on the available space on the Memory Card or internal memory.
Using [PLAYBACK MENU] Use this menu to play back photographed images. PLAYBACK MENU Setting the [PLAYBACK MENU] ERASE SLIDE SHOW BACK FRAME PRINT ORDER (DPOFALL ) FRAMES A Press w to set the camera to Playback mode (➝p.32). PROTECT COPY PLAYBACK MENU ERASE E Press n or o to change the setting. SLIDE SHOW PRINT ORDER (DPOF ) PROTECT COPY B Press MENU/OK to open the [PLAYBACK MENU]. C Press n or o to select the menu. D Press q. 62 F Press MENU/OK to confirm the setting.
[PLAYBACK MENU] Setting automatic playback ([ SLIDE SHOW]) Use this mode to play back photographed images continuously. You can select playback interval and type of image transition. Setting the menu (➝p.62) DPOF set frame ([ PRINT ORDER (DPOF)]) You can specify the image, number of prints, with or without date of printing with a DPOF-compatible printer.
[PLAYBACK MENU] Setting the menu (➝p.62) [WITH DATE] / [WITHOUT DATE] Selecting [WITH DATEE], E appears on the LCD monitor and the date will be imprinted on your prints. PRINT ORDER (DPOF DPOF) DPOF : 00009 Total number of prints Setting for that frame MEMO Canceling DPOF setting A Press MENU/OK to open the [PLAYBACK MENU] and press n or o to select [ PRINT ORDER (DPOF)]. B Press q. C Press n or o to select [WITH DATE E] or [WITHOUT DATE] and press MENU/OK to display the print order screen.
Setting the menu (➝p.62) MEMO • When DPOF settings were specified on another camera. [RESET ALL] To cancel all DPOF settings: RESET DPOF OK? YES RESET DPOF OK? NO CANCEL Select [RESET ALL] in the [PLAYBACK MENU] (➝p.63). Press MENU/OK. MEMO CAUTION • Pressing DISP/BACK while choosing settings will cancel all current settings. If there were previous DPOF settings, only the modifications are canceled.
[PLAYBACK MENU] Setting the menu (➝p.62) Z u PRINT ORDER (DPOF) DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications for images shot using a digital camera on media such as a Memory Card. The recorded specifications include information on which frames are to be printed. This section gives a detailed description of how to order your prints with FinePix F480 / FinePix F485.
Setting the menu (➝p.62) Protecting the images ([ PROTECT]) [SET ALL] Use this mode to prevent frames (files) from being accidentally erased. Your camera calls images “frames”. SET ALL OK? IT MAY TAKE A WHILE [FRAME SET] / [RESET] YES To protect or unprotect only the selected frame (file): UNPROTECT OK? Press MENU/OK to protect all the frames (files).
[PLAYBACK MENU] Setting the menu (➝p.62) MEMO To stop the procedure midway Copying the images ([ COPY]) It is possible to transfer saved images between the internal memory and a Memory Card. Your camera calls images “frames”. CANCEL If the images are very large, protecting or unprotecting all the frames (files) may take some time. If you want to take a picture or record a movie during the procedure, press DISP/BACK.
Setting the menu (➝p.62) Copying one frame at a time ([FRAME]) COPY OK? 100 - 0001 COPY INTERNAL MEMORY CARD CARD FRAME ALL FRAMES INTERNAL MEMORY YES YES CANCEL CANCEL A Press n or o to select [FRAME]. D Press MENU/OK to copy the currently displayed frame (file). B Press MENU/OK. MEMO To copy another frame (file), repeat steps C and D. When copying frames (files) is completed, press DISP/ BACK. Advanced Features — Playback C Press p or q to select the copying frame (file).
[PLAYBACK MENU] Setting the menu (➝p.62) Copying all frames ([ALL FRAMES]) COPY ALL OK? 100 - 0001 IT MAY TAKE A WHILE COPY 100 - 0001 INTERNAL MEMORY CARD CARD COPY FRAME ALL FRAMES INTERNAL MEMORY YES YES CANCEL CANCEL A Press n or o to select [ALL FRAMES]. C Press MENU/OK to copy all the frames (files). CAUTION B Press MENU/OK. 70 • When [\ MEMORY FULL] or [Y MEMORY FULL] appears on the LCD monitor, copying the data stops on the way.
Setting the menu (➝p.62) Rotating the images ([ IMAGE ROTATE]) IMAGE ROTATE When shooting in the vertical position, the image appears horizontal on the LCD monitor. Use this mode to rotate an image and to display correct direction. CAUTION MEMO An image can be rotated only when playing back using FinePix F480 / FinePix F485. You may not be able to rotate images that were shot with a camera other than FinePix F480 / FinePix F485. CANCEL E Press n or o to rotate the image.
[PLAYBACK MENU] Setting the menu (➝p.62) Trimming the images ([ TRIMMING]) 2 Use this mode to trim the required part of the photographed image. 1 Specify trimming part of image. ] wide zoom (Zoom out) [ tele zoom (Zoom in) TRIMMING TRIMMING Select the menu. A Press w to set the camera to Playback mode (➝p.32). YES B Press p or q to select the trimming frame (file). CANCEL YES CANCEL Zoom bar A Set the zoom switch to [ or ] to zoom in or out of an image.
Setting the menu (➝p.62) MEMO C Press MENU/OK. REC OK? 3 CANCEL Record the image. Check the saved image size and press MENU/OK. The trimmed image is added as a separate file in the final frame. 4 Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) / A5 size 2 Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) / A6 size ` To use for e-mail or web site • When % quality setting is selected, the image is trimmed to normal size (4:3 aspect ratio).
r Recording Movies Use this mode to record movies. Set the camera to r Movie mode Z Zooming the image You must zoom beforehand as you cannot zoom during recording. Set the Mode dial to r. STANDBY 13s Zoom bar Set the zoom switch to [ or ] to zoom in or out of an image. CHECK STANDBY 74 CHECK 13s The available recording time appears on the LCD monitor. • Optical zoom focal length Approx. 28 mm to 112 mm (35 mm camera equivalent) Max. zoom scale: 4× • Focal range Approx. 40 cm (1.3 ft.
Record movies MEMO REC 12s Fully pressed Recording ends when pressing the shutter button down halfway during recording or the remaining time runs out. Halfway pressed MEMO There is no need to hold down the shutter button during recording. CHECK Recording movies • Specifications: Motion JPEG (➝p.124). Monaural sound • Quality selection method: $ (320 × 240 pixels) • Frame rate (➝p.
w Playing Back Movies Setting the camera to w Playback mode (➝p.32) Z Playing back movies Control 100 - 0002 Playback 12 / 31 / 2050 PLAY 10:00 AM Pause / Resume Pauses the movie during playback. Press o again to resume playback. Stop Stops playback. Press p or q while playback is stopped to go back to the previous file or advance to the next file respectively. A Press p or q to select the movie file. r appears on the LCD monitor. B Press o to begin playing back movie.
MEMO If the subject of the shot is very bright, white vertical streaks or black horizontal streaks may appear in the image during playback. This is normal. CAUTION • You may not be able to play back some movie files recorded on other cameras. • To play back movie files on a PC, save the movie file on the Memory Card or internal memory to the PC’s hard disk and then play back the saved file. • When using FinePix F480 / FinePix F485, make sure not to cover the speaker. The sound is difficult to hear.
[ SET-UP] Using the [SET-UP] menu 1 Open the [SET-UP] menu. Change the setting. SET - UP A Press MENU/OK to open the menu. B Press n or o to select [ 3 FORMAT / LANG. AUTO POWER OFF TIME DIFFERENCE VIDEO SYSTEM 5 MIN 2 MIN OFF SET-UP]. A Press n or o to select the menu. C Press q. 2 B Press q. Different type of screen appears depending on selected item. Change the page. SET - UP C Press n or o to change the setting. FORMAT / LANG.
[SET-UP] How to use the [SET-UP] menu (➝p.78) [SET-UP] menu option Setting Display Factory default Explanation Page Sets the way for displaying the check image screen (photograph result) after taking a picture. The image is displayed for 3 or 1.5 seconds and then recorded. The color tones in images recorded may differ from actual color. Play back the recorded images to check them. – IMAGE DISP.] [3 SEC]/[1.5 SEC] [1.5 SEC] [ FRAME NO.] [CONT.]/[RENEW] [CONT.
[ SET-UP] How to use the [SET-UP] menu (➝p.78) Setting [ Display FORMAT] [ – ] [ AUTO POWER OFF] [ TIME DIFFERENCE] [ [ 80 VIDEO SYSTEM] RESET] Factory default – [ENGLISH] Specifies the language used for LCD monitor display. Page 84 24 Sets the time of turning camera off when camera is not used. 85 Specifies the time difference settings. 85 – Specifies whether video output is set to NTSC or PAL.
[SET-UP] How to use the [SET-UP] menu (➝p.78) CHECK [FRAME NO.] Frame number Use this function to specify whether frame numbers are assigned consecutively from previous numbers or begin again. 100 - 0001 File number A B * Formatted Memory Card or internal memory used for both A and B. [RENEW] : Pictures are stored on each Memory Card beginning with a file number 0001. Each image will be numbered consecutively from the last number used.
[ SET-UP] How to use the [SET-UP] menu (➝p.78) CHECK [DIGITAL ZOOM] Use this function to shoot enlarged images than maximum optical zoom scale. AUTO N 124 Zoom bar • Optical zoom focal length* Approx. 28 mm to 112 mm • Digital zoom focal length* Approx. 112 mm to 773 mm Max. zoom scale: approx. 6.9× * 35 mm camera equivalents MEMO When zooming changes between optical and digital, the position of the “ ” indicator stops.
[SET-UP] How to use the [SET-UP] menu (➝p.78) [LCD POWER SAVE] [PLAYBACK VOLUME] The LCD monitor darkens when camera is not used for 8 seconds. When this function is active, you can save power and get the maximum possible running time from your batteries. Use this function to adjust volume while playing back movie. MEMO VOLUME 7 Pressing any button wakes the camera up. CAUTION The LCD power save function is disabled during Playback mode and Movie mode.
[ SET-UP] How to use the [SET-UP] menu (➝p.78) [LCD BRIGHTNESS] [FORMAT] Use this function to adjust the LCD monitor brightness. Initialize (format) the Memory Card or internal memory for use with the camera. LCD BRIGHTNESS FORMAT FORMAT OK? 0 ERASE ALL DATA OK SET CANCEL CANCEL SET A Press n or o to adjust the LCD monitor brightness. The indicator moves to the + to display the LCD monitor brightly or to the – to darken the LCD monitor. B Press MENU/OK to confirm the setting.
[SET-UP] How to use the [SET-UP] menu (➝p.78) [AUTO POWER OFF] [TIME DIFFERENCE] When this function is active and the camera remains unused for 2 or 5 minutes, it turns camera off. Use this function when you want to get the maximum possible running time from your batteries. Use this function when traveling to destinations in different time zones. This function sets a time difference relative to the date and time currently set.
[ SET-UP] 2 How to use the [SET-UP] menu (➝p.78) Move to [TIME DIFFERENCE] screen. SET - UP AUTO POWER OFF TIME DIFFERENCE VIDEO SYSTEM HOME LOCAL Press q. N 124 11:00 AM In the time difference setting, when you change to the Photography mode, I and the date is displayed for 3 seconds, the date display turns yellow. CHECK TIME DIFFERENCE 12/ 31 12 31/ 2050 10 10: 00 AM 12/ 31 12 31/ 2050 10 10: 00 AM CANCEL A Press p or q to select +/–, hour, and minute. B Press n or o to change the setting.
Connecting to a TV When connecting to a TV, images can be displayed on wider screen. Using slide show function (➝p.63) together, you can have fun with folks. A/V cable (included) Plug the A/V cable (included) into the A/V OUT (Audio/Visual output) socket of the camera. Video (yellow) To terminals Audio (white) Plug the other end of the cable into the audio/video input socket on the TV. MEMO • Plug the A/V cable (included) correctly in its terminal.
Connecting Camera Directly to Printer — PictBridge Function When a printer that supports PictBridge is available, images can be printed by connecting the camera directly to the PictBridgecompatible printer without a PC. 2 [ USB] appears on the LCD monitor. USB Connecting to a printer 1 Connect the camera to a printer and turn the printer on. Press w for about 1 second to turn the camera on. Connect the camera to your printer using the USB cable.
Specifying images for printing ([PRINT WITH DATE] / [PRINT WITHOUT DATE]) PRINT THESE FRAMES TOTAL : 9 SHEETS PICTBRIDGE TOTAL : 00002 YES D Press MENU/OK again to download the data to the printer and start printing the specified number of prints. 02 SHEETS FRAME OK CANCEL SET MEMO Even if MENU/OK is pressed with total number of images set at 0 (zero), the screen printing once appears on the LCD monitor. Press MENU/OK again and printing starts. B Press n or o to set a value.
Connecting Camera Directly to Printer — PictBridge Function Printing with DPOF setting ([u PRINT DPOF]) PRINT DPOF OK? TOTAL : 9 SHEETS PICTBRIDGE PRINT WITH DATE PRINT WITHOUT DATE PRINT DPOF YES CANCEL D Press MENU/OK again to download the data to the printer and start printing the specified frames (files) continuously. A Press DISP/BACK to open the menu. CHECK To select [uPRINT DPOF], the DPOF settings must be specified on FinePix F480 / FinePix F485 beforehand (➝p.63).
MEMO MEMO PRINTING DPOF setting can be specified for images on internal memory. CAUTION CANCEL Press DISP/BACK to cancel the printing. Depending on the printer, the printing may not be canceled immediately or printing may stop midway through. When printing stops midway, briefly turn the camera off and then on again. Camera Connection Disconnecting the printer A Check that [PRINTING] is not displayed on the camera’s LCD monitor. B Turn the camera off. Unplug the USB cable.
Installation on a Windows PC Pre-installation checklist Z Hard ware (software) requirements and recommended system To run this software, you must have the hardware and software described below. Check your system before you begin the installation.
Do not connect the camera to your PC until the software installation is completed. 1 For Windows Vista users: When loading the bundled CD-ROM on your PC, the [AutoPlay] window may appear. In this case, click [SETUP.exe]. When [User Account Control] window appears, click [Allow]. Install FinePixViewer as instructed by the on-screen instructions. Launching the installer manually 2 A Double-click the [My Computer] icon. * Windows XP users should click [My Computer] in the [Start] menu.
Installation on a Mac OS X Pre-installation checklist Z Hardware and software requirements To run this software, you must have the hardware and software described below. Check your system before you begin the installation. Compatible Mac*1 Power Macintosh G3*2, PowerBook G3*2, Power Macintosh G4, iMac, iBook, Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5, MacBook, MacBook Pro or Mac Mini Operating System Mac OS X (compatible with version 10.3.9 to 10.4.
1 Turn your Macintosh on and start up Mac OS X. Do not launch any other applications. 2 When the bundled CD-ROM is loaded into the CD-ROM drive, the [FinePix] icon appears. Double-click the [FinePix] icon to open the [FinePix] volume window. 3 4 Double-click on [Installer for MacOSX]. The Installer setup dialog appears. Click the [Installing FinePixViewer] button. CAUTION For more information on what is installed, click the [Read Me First] button and [Using FinePixViewer] button.
Installation on a Mac OS X 9 Change the Image Capture settings. Select [Preferences...] from the [Image Capture] menu. 10 Select [Other...] from [When a camera is connected, open]. 11 Select [FPVBridge] from [FinePixViewer] folder in the [Applications] folder and click the [Open] button. 12 Select [Quit Image Capture] menu in the [Image Capture] menu.
Connecting to a PC By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using “FinePixViewer” performs images saving, browsing and file management etc. FinePixViewer Overview Enables importing images, managing files and folders, and ordering prints using the internet (only Windows users). CAUTION • Do not format the Memory Card in the camera on the PC. • Use the Memory Card with images taken by a FUJIFILM Digital camera.
Connecting to a PC 98 CAUTION CAUTION • FinePix F480 / FinePix F485 is compatible with PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol). A PTP/MTP-compatible camera is a camera that can recognize the PC and printer automatically when connected. • Do not disconnect the USB cable (included) when the camera is communicating with a PC. If the USB cable (included) is disconnected during communication, the files on the Memory Card or internal memory may be damaged.
The following steps differ depending on the PC’s operating system (Windows 2000/XP/ Vista case) When your PC recognizes the camera automatically, FinePixViewer S automatically starts up and the Load photos window appears. Follow the instructions provided on screen to save the images. To proceed without saving the images, click the [Menu] button. CAUTION When there are many images stored on a Memory Card, it takes a while to display on the screen of your PC.
Connecting to a PC Using FinePixViewer Mastering FinePixViewer For all information on FinePixViewer functions, refer to [How to Use FinePixViewer] in the Help menu for details. • What is explained in [How to Use FinePixViewer]... [How to Use FinePixViewer] covers a range of topics, including batch processing and ordering prints. Example: Looking up slide shows A Click [How to Use FinePixViewer] in the FinePixViewer Help menu. B Click [Basic Operation] and then click [Slide Show] in the menu that appears.
D When the message appears, click the [OK] button. Check your selection carefully since the process cannot be canceled once you click the [OK] button. Macintosh Quit FinePixViewer. Then drag the installed FinePixViewer folder to the Trash and select [Empty Trash] in the [Finder] menu.
System Expansion Option By using FinePix F480 / FinePix F485 together with other optional FUJIFILM products, your system can be expanded to fill a wide range of uses. Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
Accessories Guide Visit the FUJIFILM web site for the latest information on camera accessories. http://www.fujifilm.com/products/digital/index.html Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability. • xD-Picture Card Use the following xD-Picture Cards: 16MB/32MB/64MB/256MB/512MB/1GB/2GB There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model number, such as DPC-M2GB).
Accessories Guide • DC Coupler CP-40N Use the CP-40N with AC-5VX when taking pictures or play back images for long periods or when FinePix F480 / FinePix F485 is connected to a PC. • PC Card Adapter DPC-AD The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard ATA-compliant (PCMCIA 2.1) PC card (Type u). - Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB. This is not compatible with the SD Memory Card.
Using Your Camera Correctly Read this information and the “Safety Notes” (➝“Notes and Cautions”), to make sure you use your camera correctly.
Notes on the xD-Picture Card™, the SD Memory Card and the Internal Memory Z Handling Memory Card • When inserting the Memory Card into the camera, hold the Memory Card straight as you push it in. • Never remove the Memory Card or turn the camera off during data recording or erasing (Memory Card formatting) as this could be damaged to the Memory Card. • The use of xD-Picture Cards is recommended with FinePix F480 / FinePix F485.
Warning Displays The table below lists the warnings that are displayed on the LCD monitor. Warning Displayed (Lit red) V (Blinking red) | Explanation There is a strong likelihood of camera shake because the shutter speed is slow. Use flash photography. A tripod may be recommended, depending on the scene and mode. The AF (autofocus) cannot work effectively. • If the image is too dark, take the picture at a distance of around 2 m (6.6 ft.) from the subject. • Use AF lock to take the picture (➝p.29).
Warning Displays Warning Displayed Explanation • The Memory Card contact area is soiled. • The Memory Card format is incorrect. [CARD ERROR] [\ MEMORY FULL] • Camera fault. • The Memory Card is damaged. • Inserted Memory Card is not compatible with your • Insert a compatible Memory Card that is operationcamera. checked at FUJIFILM Corporation (➝p.16). The internal memory or Memory Card is full.
Warning Displayed Explanation Remedy • The played back file was not recorded correctly. • The Memory Card contact area is soiled. [READ ERROR] • This file cannot be played back. • Wipe the contact area on the Memory Card with a soft, dry cloth. It may be necessary to format the Memory Card (➝p.84). If the message still appears, replace the Memory Card. • Camera fault. • Contact your FUJIFILM dealer. • An attempt was made to play back the image or the • The movie and image cannot be played back.
Warning Displays Warning Displayed Explanation Remedy An attempt was made to rotate a movie or an image These images cannot be rotated by image formats. [CAN NOT ROTATE] shot using a camera other than FinePix F480 / [r CAN NOT ROTATE] FinePix F485. [COMMUNICATION ERROR] The camera is not connected to a PC or printer. • Check that the USB cable is connected correctly. • Check that your PC or printer is turned on. Displayed for PictBridge. • Check that the printer is not out of paper or out of ink.
Troubleshooting Z Getting ready Matters Problems Possible causes The batteries have run out. The batteries are loaded backward. The battery cover is not closed securely. The camera and AC power adapter are not connected correctly. Camera is used in extremely cold conditions. Solutions Load fully charged batteries. Load the batteries in the correct direction. Nothing happens when pressing Close the battery cover securely. POWER. Connect the camera and AC power adapter correctly.
Troubleshooting Z Shooting Matters Basic operations Problems No photograph is taken when pressing the shutter button. The LCD monitor darkens after taking a picture. Focusing Macro 112 Camera has difficulty in focusing on the subject. Cannot set the camera to Macro (close-up) mode. Solutions Page The Memory Card or internal memory is full. Possible causes Insert a new Memory Card or erase some unnecessary frames. 16, 36 The Memory Card or internal memory is not formatted.
Matters Problems Possible causes Solutions Page The shutter button was pressed while the Wait until the charging is completed flash was charging. before pressing the shutter button. Cannot use the flash. Flash The Shooting mode is set to , , or . , ,, Photographed images The image is blurred. 41 The batteries have run out. Load fully charged batteries. The flash is set to [C SUPPRESSED FLASH] mode. Set to another flash mode excluding the [C SUPPRESSED FLASH] mode.
Troubleshooting Z Shooting Matters Problems Photographed Recording images images or movies are not recorded. Possible causes AC power adapter was connected or disconnected during turning the camera on. Solutions Page Connect or disconnect the AC power adapter and DC coupler only when the camera is off. Failing to turn the camera off first can result in damage to the Memory Card or malfunctions during PC connection. – Z Playing back Matters Problems Possible causes The camera volume is set too low.
Z Connecting Matters Problems Possible causes The camera is not connected to the TV correctly. Connecting to TV Page The included video cable or A/V cable was After the movie playback mode is stopped, connect the camera and TV There is no image connected during movie playback. correctly. or sound on the TV. “TV” is selected as the TV input. Set the TV input to “VIDEO”. The video output setting is incorrect. The TV image is black and white. PC does not Connecting to PC recognize the camera.
Troubleshooting Z Others Matters Problems Nothing happens when pressing the buttons on the camera. Camera operation etc. The camera no longer works correctly. 116 Possible causes Solutions Page Briefly remove the battery / DC coupler, or disconnect the AC power adapter and DC coupler. Then reload the battery / DC coupler or reconnect the AC power adapter and DC coupler and try again. 12, 22 The batteries have run out. Load fully charged battery.
Specifications System Model Digital camera FinePix F480 / FinePix F485 Effective pixels 8.15 million pixels CCD 1/2.5-inch Storage media Internal memory (approx. 12 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB) /SD/SDHC Memory Card (FUJIFILM recommendation (➝p.16)) File format Still image: DCF-compliant Compressed: Exif ver.2.
Specifications System 118 Digital zoom Approx. 6.9× (4× optical zoom lens is used together: Max. zoom scale: approx. 27.6×) Aperture (Wide-angle) F2.7/F5.4 Focal range Normal: approx. 40 cm (1.3 ft.) to infinity Macro: wide-angle: approx. 5 cm (1.9 in.) to 80 cm (2.6 ft.) telephoto: approx. 30 cm (1.0 ft.) to 80 cm (2.6 ft.
System White balance Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White), Fluorescent (Cool White), Incandescent light) Self-timer Approx. 2 sec./10 sec. Flash type Auto flash Effective range: ( : AUTO) Wide-angle: approx. 50 cm-4.0 m (1.6 ft.-13.1 ft.) Telephoto: approx. 50 cm-2.2 m (1.6 ft.-7.2 ft.) Macro: approx. 50 cm-80 cm (1.6 ft.-2.6 ft.
Specifications Power Supply and Others Guide to the number of available frames for battery operation NP-40N Battery Type Number of frames Approx. 150 frames According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring digital still camera battery consumption (extract): When using a battery, use the battery supplied with the camera. The storage media should be xDPicture Card.
Notes on Using the Battery Charger Battery NP-40N Nominal voltage DC 3.6V Nominal capacity 760 mAh Operating temperature 0°C to +40°C (+32°F to +104°F) Dimensions 35.3 mm × 40.0 mm × 5.85 mm(1.4 in. × 1.6 in. × 0.2 in.)(W × H × D) Mass (Weight) Approx. 18 g (0.6 oz.) Battery Charger BC-40N Rated input 110-240 V AC, 50/60 Hz Input capacity 7 VA Rated output 4.2 V DC, 550 mA Applicable batteries Rechargeable Battery NP-40N Charging time Approx. 120 minutes Dimensions 88.0 mm × 54.
Specifications Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory The number of available frames and recording time is approximate. The actual number of frames and recording time varies depending on the type of Memory Card or shooting conditions. Also, the number of frames and recording time displayed in the LCD monitor may not decrease regularly. Quality setting Number of recorded pixels Image data size Internal memory (approx.
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC-M2GB, movie recording time may be reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the xD-Picture Card before use. Back up important frames (files) onto your PC or another media. * These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from errors in this Owner’s Manual.
Explanation of Terms EV A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed. When the amount of light striking the CCD doubles, the EV increases by 1.
FUJIFILM Digital Camera Worldwide Network If you have technical questions or if you need repair service, ask the following local distributor. Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty. There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with. These lists are subject to change without notice. NORTH AMERICA Canada U.S.A.
FUJIFILM Digital Camera Worldwide Network Ecuador Importaciones Espacri Cia. Ltda. Technical support & Repair service Simón Bolivar 5-69 y Hno. Miguel - Cuenca TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec Mexico Fujifilm de Mexico, S.A. de C.V. Technical support Repair service Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F. TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx Paraguay Errece S.R.L.
Cyprus Doros Neophytou CAMERA REPAIRS Technical support & Repair service 28B, Agiou Demetriou, Acropoli, Nicosia TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net Czech Republic Fujifilm Cz., s.r.o. Technical support U nakladoveho nadrazi 2/1949, 130 00 Praha 3 TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz Czech Republic AWH servis Repair service Milesovska 1, 130 00 Praha 3, Czech republic TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.
FUJIFILM Digital Camera Worldwide Network Malta Ciancio (1913) Co.Ltd. Technical support & Repair service Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05 TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt Netherlands Fujifilm Nederland BV Technical support Repair service Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands TEL 010-2812345 FAX 010-2812334 fuji@fujifilm.nl Norway Fujifilm Norge AS Technical support Repair service Poland Fujifilm Polska Distribution Sp. z o.o.
Sweden Fujifilm Sverige AB Technical support Repair service Switzerland / Lichtenstein Fujifilm (Switzerland) AG Technical support & Repair service Turkey Fujifilm Turkiye Sinfo A.S. Technical support Repair service U.K. Ukraine MIDDLE EAST Iran Israel FUJIFILM UK Ltd. Technical support Repair service Image Ukraine CJSC Technical support & Repair service Sveavägen 167 104 35 Stockholm TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.
FUJIFILM Digital Camera Worldwide Network Syria Al-Shahbandar P.O. Box:31180 Damascus SYRIA TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae U.A.E. Grand Stores Technical support & Repair service Yemen Al-Haidary Trading Technical support Repair service P.O.
Indonesia PT Modern Photo Tbk Technical support & Repair service Jl.Matraman Raya 12, Jakarta Timur 13150 TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012 assd_kmr@modernphoto.co.id Malaysia FUJIFILM (Malaysia) Sdn. Bhd. Technical support Repair service Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling Jaya, Selangor Darul Ehsan, Malaysia TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my Philippines YKL Development & Trdg. Corp.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.
Notes and Cautions IMPORTANT SAFETY INSTRUCTIONS Read Instructions: All the safety and operating instructions should be read before the appliance is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions: All operating and use instructions should be followed.
Power Supply and Battery Be sure to read this notes before using Safety Notes WARNING • Make sure that you use your camera correctly. Read these Safety Notes and your Owner’s Manual carefully before use. • After reading these Safety Notes, store them in a safe place. About the Icons • The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.