Operation Manual

38
3
39
1Press the “MENU/OK” button to display the
menu.
2Use “d” and “c” to select the menu item and
“a ([)” and “b (])” to change the setting.
3Press the “MENU/OK” button to confirm the
setting.
When you validate the settings, the respective
icons appear at the top of the screen.
●
! The settings available in the menu screen differ
depending on the photography mode. See P.37 for
details.
●
! The flash charging time may increase if the charge
remaining in the batteries is low.
●
! When you take a shot using the flash, you may see
the video image disappear and the screen go dark
as the flash charges. The viewfinder lamp flashes
orange while the flash is charging.
●
! If you use the flash in very dusty environments,
floating dust particles may appear as glowing white
dots on your image.
When you are in still image mode (with the Mode
switch set to “q”), you can switch to “q AUTO”
mode or “q MANUAL” mode from “d OPTION”
in the photography menu.
This mode can be selected in the “1 • 2” still
image modes.
Use the flash mode that best suits your shot.
h5 modes: “AUTO,
:, y, u and ;”
●
Effective flash range (for 1 AUTO)
Wide-angle: Approx. 0.2 m to 3 m
(0.6 ft. to 9.8 ft.)
Telephoto : Approx. 0.8 m to 3 m
(2.6 ft. to 9.8 ft.)
Use this mode for ordinary photography. The
flash fires automatically as required by the
shooting conditions.
AUTO Auto Flash Mode
y FLASH
PHOTOGRAPHY MENU
Setting display
0103 02
This is the easiest mode for taking pictures and
can be used in a wide range of conditions.
This mode allows you to set the “EV” and
“WHITE BALANCE” settings.
1 AUTO
2 MANUAL
PHOTOGRAPHY MENU OPERATION/SELECTING q AUTO OR q MANUAL
PHOTOGRAPHY MENU