Getting Ready Using the Camera Advanced Features • Photography • Playback • Movie OWNER’S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800/ FinePix A610 correctly. Please follow the instructions carefully.
Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in Canada For customers in the U.S.A. This Class B digital apparatus complies with Canadian ICES-003. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with Part 15 of the FCC Rules.
IMPORTANT NOTICE BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT, SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM. BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY THIS AGREEMENT.
EC Declaration of Conformity We Name: Address: FUJIFILM Europe GmbH Heesenstrasse 31 40549 Dusseldorf, Germany declare that the product Product Name: FUJIFILM DIGITAL CAMERA FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800/FinePix A610 Manufacturer’s Name: FUJIFILM Corporation Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN conforms to the following Standards: Safety: EN60065: 2002 EMC: EN55022: 2006 Classe B EN55024: 1998 + A1: 2001 + A2: 2003 EN61000-3-2: 2
Disposal of Electric and Electronic Equipment in Private Households Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
Contents Warning................................................................. 2 IMPORTANT ......................................................... 3 EC Declaration of Conformity................................ 4 Disposal of Electric and Electronic Equipment in Private Households...................................... 5 Contents................................................................ 6 Preface.................................................................. 9 About this Manual ..................
[PLAYBACK MENU] ........................................... 69 Sending and receiving images ([ IR COMMUNICATION]) (FinePix A920/FinePix A900/FinePix A825/ FinePix A820 only) ................................... 69 Setting automatic playback ([ SLIDE SHOW]) ................................. 73 DPOF set frame ([ PRINT ORDER (DPOF)]) .................. 73 Protecting the images ([ PROTECT])...... 77 Copying the images ([ COPY]) ................ 78 Rotating the images ([ IMAGE ROTATE]) ...........................
Contents Usable Memory Cards You can use the xD-Picture Card, the SD Memory Card with the FinePix A900, FinePix A825, FinePix A820, FinePix A800, and FinePix A610. You can use the xD-Picture Card, the SD Memory Card and the SDHC Memory Card with FinePix A920. In this Owner’s Manual, these cards are expressed as “Memory Card” and “SD Memory Card”.
Preface Z Test Shots Prior to Photography For important photographs (such as weddings and overseas trips), always take a test shot and view the image to make sure that the camera is working normally. • FUJIFILM Corporation cannot accept liability for any incidental losses (such as the costs of photography or the loss of income from photography) incurred as a result of faults with this product.
Preface • IrSS™ Trademark or IrSimpleShot™ Trademark is owned by the Infrared Data Association®. • SD logo and SDHC logo are trademarks. • Other company or product names are trademarks or registered trademarks of the respective companies. Z Notes on Electrical Interference If the camera is to be used in hospitals or aircrafts, please note that this camera may cause interference to other equipment in the hospital or aircraft. For details, please check with the applicable regulations.
About this Manual Z About marks CAUTION: This mark denotes issues that may affect the camera’s operation. CHECK: This mark denotes points to notice in the camera’s operation. MEMO: This mark denotes additional topics that complement the basic operating procedures. Z Usable Memory Cards You can use the xD-Picture Card, the SD Memory Card with the FinePix A900, FinePix A825, FinePix A820, FinePix A800, and FinePix A610.
About this Manual Z About each model’s functions This Owner’s Manual shows the description of 6 models: FinePix A920, FinePix A900, FinePix A825, FinePix A820, FinePix A800, and FinePix A610. Some functions are available only on one model. The main differences among the 6 models are shown in the table below. Check the table to confirm which functions your camera has. FinePix A920 FinePix A900 FinePix 825/ FinePix 820 FinePix A800 FinePix A610 Mode dial (➝p.
Accessories Included Make sure that all the below accessories are included. Note that accessories may vary depending on model. • USB cable (mini-B) (1) • AA-size Alkaline Batteries (LR6) (2) \ • CD-ROM (1) Software for FinePix KA • Strap (1) • Video cable (1) (FinePix A610 only) • Owner’s Manual (this manual) (1) Attaching the strap • A/V cable (1) (FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800 only) Attach the strap as shown in 1 and 2.
Camera Parts and Features (FinePix A610) • Refer to the pages in parentheses for information on using the camera parts or features. A B D E C F G H J I K O L P M Q N R V W 14 S T U A Shutter button B Zoom switch (p.30, 37) C Lens (Lens cover) D POWER button E Flash (p.54) F ; USB socket (mini-B) G VIDEO OUT (Video output) socket (p.98) H DC IN 3V (power input) socket (p.98) I Self-timer lamp (p.57) J Indicator lamp (p.32) K LCD monitor L MENU/OK button M p/e Macro button (p.
Camera Parts and Features (FinePix A900/A825/A820/A800) • Refer to the pages in parentheses for information on using the camera parts or features. The following illustrations show the FinePix A900 as an example (FinePix A825, FinePix A820, and FinePix A800 operate similarly). A Shutter button B Zoom switch (p.30, 37) C Microphone D Lens (Lens cover) E POWER button F Flash (p.54) G Infrared port (FinePix A900/FinePix A825/FinePix A820 only) (p.
Camera Parts and Features (FinePix A920) • Refer to the pages in parentheses for information on using the camera parts or features. A Shutter button B Zoom switch (p.30, 37) C Microphone D Lens (Lens cover) E POWER button F Flash (p.54) G Infrared port (p.69) H ; USB socket (mini-B) I A/V OUT (Audio/Visual output) socket (p.99) J DC IN 3V (power input) socket (p.99) K Self-timer lamp (p.57) L Indicator lamp (p.32) M LCD monitor N MENU/OK button O p/e Macro button (p.
Example of LCD Monitor Text Display *FinePix A800 Z Photography mode A ( Self-timer (p.56) B e Macro (close-up) (p.53) C C Flash (p.54) D s Photography mode (p.45, 46) E Battery level indicator (p.20) F AF frame (p.31) G Date/Time (p.25) H 9 White balance (p.67) I iN Quality mode (p.64) J Number of available frames (p.143-146) K ISO 100 Sensitivity (p.63) L { AF warning (p.124) M | Camera shake warning (p.124) N Increasing monitor brightness (p.58) O Y Internal memory (p.23) P S Exposure compensation (p.
Loading the Batteries Batteries are required to operate the digital camera. At first, load the batteries in the camera. 1 Open the battery cover. Z Compatible batteries AA-size alkaline batteries (2) or AA-size Ni-MH rechargeable batteries (2) (sold separately) 18 CAUTION CHECK • Never use the following types of batteries, as they could cause Outer casing serious problems such as battery fluid leakage or overheating: 1.Batteries with split or peeling outer casings 2.
Load the batteries correctly as indicated by the polarity icons. Getting Ready 2 CAUTION Match the polarity icons (+ and ,) of the batteries to those on the inside of the battery cover. 3 Close the battery cover.
Loading the Batteries Checking the battery charge Turn the camera on and check the battery level indicator on the LCD monitor. A There is ample battery charge. (Not displayed) B There is insufficient charge left in the batteries. The batteries will soon run out. Have a new set of batteries ready. (Lit red) C The batteries are depleted. The display will shortly go blank and the camera will stop working. Replace or recharge the batteries.
Loading the Memory Card 2 Insert a Memory Card. (xD-Picture Card) Gold marking SD Memory Cards/SDHC Memory Cards (The SDHC Memory Card is only usable with FinePix A920.) They are operation-checked at FUJIFILM Corporation. Manufacturer: SanDisk MEMO • Compatible Memory Cards will be updated in our web site: http://www.fujifilm.com/products/digital_cameras/index.html • Depending on the SD Memory Card, recording of movies may be interrupted. Use of above mentioned SD Memory Cards are recommended.
Loading the Memory Card CAUTION Be sure to unlock the protection of the SD Memory Card before inserting it. If it is locked, recording/deleting images, as well as formatting are not available. To unlock the protection, slide the switch back, and the SD Memory Card will work normally. 3 Close the battery cover. Protection switch How to replace the Memory Card CAUTION • A new SD Memory Card or a card previously used on a PC or any device other than the camera should be formatted (➝p.
CAUTION Z About internal memory AUTO N 124 FinePix A920/FinePix A900/ FinePix A825/FinePix A820/ FinePix A800/FinePix A610 has internal memory that can store images without Memory Card. Y appears on the LCD monitor when internal memory is active. Getting Ready • When storing Memory Cards, make sure that they are kept out of the reach of children. A Memory Card could be swallowed and cause suffocation. If a child swallows a Memory Card, seek medical attention or call emergency number right away.
Turning On and Off Turning the camera on in Photography mode Press POWER down fully to turn the camera on. Press POWER again to turn the camera off. MEMO Changes between Photography mode and Playback mode Press w during shooting to change to Playback mode. Press the shutter button down halfway to return to Photography mode. CAUTION • The lens moves and the lens cover opens when turning the camera on in Photography mode. Take care not to obstruct the lens.
2 Set the date and time. DATE / TIME NOT SET When using the camera for the first time after purchasing, the language, date, and time are cleared. Set the language, date, and time. 1 Getting Ready Setting the language, date, and time YY.MM.DD [ ] screen appears when turning the camera on. SET 1. 1 12:00 AM NO A Press p or q to select Year, Month, Day, Hour, or Minute. START MENU / LANG. B Press n or o to correct the setting. SET NO MEMO A Press n, o, p, or q to select the language.
Turning On and Off 3 MEMO Change the date format. DATE / TIME NOT SET DD . MM . YY MM / DD / YY 12 / 1 / 2007 YY . MM . DD SET 10:00 AM NO A Press p or q to select the date format. B Press n or o to set the format. C Always press MENU/OK after the settings are completed. Date format ex. Dec 1, 2007 [YY.MM.DD]: [2007.12.1] [MM/DD/YY]: [12/1/2007] [DD.MM.YY]: [1.12.2007] 26 [START MENU] screen also appears when the batteries have been removed and the camera has been left for a long period.
Correcting the Date and Time 2 Open the [SET-UP] menu. SET - UP SHOOTING MENU ISO QUALITY Display the [DATE/TIME] screen. Getting Ready 1 AUTO DATE / TIME BEEP VOLUME SHUTTER VOLUME PLAYBACK VOLUME LCD BRIGHTNESS N SET-UP * FinePix A800 * FinePix A800 A Press MENU/OK to open the menu. A Press p or q to select B Press n or o to select [ B Press o to move to menu item. C Press q. SET-UP]. C Press n or o to select [ . DATE/TIME]. D Press q. See “2 Set the date and time. ” (➝p.25).
Selecting the Language 1 2 Open the [SET-UP] menu. SHOOTING MENU ISO QUALITY Display the [ ] screen. SET - UP AUTO N FORMAT / LANG. AUTO POWER OFF TIME DIFFERENCE VIDEO SYSTEM SET-UP ENGLISH 2 MIN NTSC * FinePix A800 A Press MENU/OK to open the menu. B Press n or o to select [ A Press p or q to select on the FinePix A610). (Select SET-UP]. B Press o to move to menu item. C Press q. C Press n or o to select [ D Press q. See “1 [ ] screen appears when turning the camera on. ” (➝p.25). 28 ].
Taking Pictures ([AUTO] Mode) This section describes the basic operations. Holding the camera correctly 1 Turn the camera on. Brace your elbows against your sides and hold the camera with both hands. Using the Camera A Press POWER down fully to turn the camera on. Do not cover the lens or flash with your fingers. B Set the Mode dial to q (FinePix A920/FinePix A900/ FinePix A825/FinePix A820/FinePix A800 only).
Taking Pictures ([AUTO] Mode) 2 Check the composition on the LCD monitor. To adjust zoom scale using the Zoom switch: ] wide zoom (Zoom out) [ tele zoom (Zoom in) Zoom bar • Focal range Approx. 50 cm (1.6 ft.) to infinity • Optical zoom focal length (35 mm camera equivalent) Approx. 36 mm to 108 mm • Max. zoom scale 3× • Focal range Approx. 60 cm (2.0 ft.) to infinity • Optical zoom focal length (35 mm camera equivalent) Approx. 39 mm to 117 mm • Max.
3 Focus on the main subject in the AF frame and press the shutter button down halfway. 4 Press the shutter button fully. AF frame Halfway pressed AF frame becomes smaller and camera focuses on the subject.
Taking Pictures ([AUTO] Mode) Flash When pressing the shutter button down halfway, b appears on the LCD monitor before the flash fires. Z Indicator lamp display The indicator lamp lights or blinks when pressing the shutter button, etc. The indicator lamp shows the camera status. Indicator lamp 250 F4.2 Change the flash mode when you want to take pictures without flash. See p.54 for information on flash.
Taking pictures with the focus and exposure locked 1 Move the camera slightly so that one of the subjects is in the AF frame. 2 Press the shutter button down halfway to focus on the subject. Using the Camera In the above composition, the subjects (two people in this case) are not in the AF frame. Pressing the shutter button halfway at this point will result in the subjects being out of focus.
Taking Pictures ([AUTO] Mode) 3 Continue to hold the shutter button down halfway. Move the camera back to the original image and press the shutter button fully. Subjects not suitable for autofocus FinePix A920/FinePix A900/FinePix A825/FinePix A820/ FinePix A800/FinePix A610 uses a high-precision autofocusing mechanism. However, it may have difficulty focusing on the following: Click 250 F4.
Adjusting the shot composition Select the LCD monitor display. Press DISP/BACK to change the LCD monitor display. Best framing Using the Camera Position the main subject at the intersection of two lines in this frame or align one of the horizontal lines with the horizon. Use this frame as a guide to the subject’s size and the balance of the shot while composing a shot. MEMO Always use AF/AE lock when composing a shot. The image may be out of focus if AF/AE lock is not used.
Viewing the Images Play back your images to check them. For important photographs, always take a test shot and view the image to make sure that the camera is working normally. Select the LCD monitor display. Press DISP/BACK during Playback mode to change the LCD monitor display. Setting the camera to Playback mode Press w during shooting to change to Playback mode. When the camera is off, press w for about 1 second to turn the camera on in Playback mode.
Single-frame playback 1 Zoom in / Zoom out. To zoom in an image during single-frame playback: ] wide zoom (Zoom out) 12 / 31 / 2050 250 F4.2 [ tele zoom (Zoom in) 10:00 AM -1 2 3 Using the Camera 100 - 0001 N ISO 100 Playback zoom To select the required image: Press p: last image Press q: next image Zoom bar Selecting images To select images on the thumbnail lists screen, hold down p or q for 1 second during playback. When releasing p or q, camera returns to singleframe playback.
Viewing the Images Z Zoom scales (FinePix A920/FinePix A900) Quality mode Max. zoom scale (3488 × 2616 pixels) Approx. 5.5× % (3696 × 2464 pixels) Approx. 5.8× [ (2592 × 1944 pixels) Approx. 4.1× 3 (2048 × 1536 pixels) Approx. 3.2× 2 (1600 × 1200 pixels) Approx. 2.5× Multi-frame playback Multi-frame playback screen (9 frames) appears on the LCD monitor. Select required frame from the 9 frames. Z Zoom scales (FinePix A825/FinePix A820/FinePix A800) Quality mode i (3296 × 2472 pixels) Max.
Sorting by date In sorting by date mode, you can view all images taken on the same day. 12 / 29 12 / 30 12 / 31 2050 12 / 29 12 / 30 12 / 31 12 Using the Camera 2050 Selecting the date 1 / 12 A Press n, o, p, or q to move the cursor (colored frame) to the selecting frame. A Press n, o, p, or q to move the cursor (colored frame) to on the upper left frame. B Press p to display the selecting date. B Press MENU/OK to enlarge the image.
Erasing the Images/Movies Use this mode to erase unnecessary images or movies to have ample free space on the Memory Card or internal memory. Your camera calls images “frames”. Using the erase button ( Pressing Setting the camera to w Playback mode (➝p.36) Erasing the images using [Playback menu] /n) (n) erases images easily. PLAYBACK MENU ERASE SLIDE SHOW PRINT ORDER (DPOF ) ERASE OK? PROTECT COPY OK CANCEL * FinePix A800 SET A Press p or q to select the erasing image.
Setting the camera to w Playback mode (➝p.36) PLAYBACK MENU Erasing one frame at a time ([FRAME]) ERASE BACK SLIDE SHOW FRAME PRINT ORDER (DPOFALL ) FRAMES ERASE OK? Using the Camera PROTECT COPY * FinePix A800 YES D Press n or o to select [FRAME] or [ALL FRAMES]. CANCEL A Press p or q to select the erasing frame (file). E Press MENU/OK to confirm the setting. B Press MENU/OK to erase the currently displayed frame (file). MEMO To erase another frame (file), repeat above steps.
Erasing Erasing thethe Images/Movies Images/Movies Erasing all frames ([ALL FRAMES]) ERASE ALL OK? IT MAY TAKE A WHILE YES CANCEL Press MENU/OK to erase all the frames (files). MEMO Press DISP/BACK to cancel erasing of all the frames (files). Some unprotected frames (files) will be left unerased. CANCEL 42 Setting the camera to w Playback mode (➝p.36) MEMO • When using a Memory Card, the images in the Memory Card are erased. When not using a Memory Card, the images in the internal memory are erased.
Using the Photography Functions — Procedure of Setting Specify the camera settings for taking pictures to get the best result. A general guide is given below. 1 Set the photography mode in the shooting menu. See p.45 for information on setting shooting mode. Select the Photography mode. Set the photography mode using the mode dial. See p.46 for information on setting shooting mode. [AUTO] / /b/ /m ?(s/,/.
Using the Photography Functions — Procedure of Setting 2 Specify the photography settings. Pressing buttons or selecting menu allows you to specify photography functions. You can obtain the best result for shooting. Z Specifying functions using buttons Z Specifying functions using [SHOOTING MENU] (MENU/OK button) [ ISO] Use to specify required sensitivity setting (➝p.63). [ QUALITY] Use to specify required image size (➝p.64). e Macro Used for close-up shots (➝p.53). [ EXP.
Setting the Shooting Mode (FinePix A610) You can select the most suitable setting according to the subject by selecting one of the Shooting modes. See p.43 for information on available shooting mode. CHECK PORTRAIT LANDSCAPE ANDSCAPE SPORT NIGHT SET CANCEL A Press MENU/OK to open the menu. B Press n or o to select the [ SHOOTING MODE]. Advanced Features — Photography Clear scenic shots • See p.55 for information on the available flash modes.
Setting the Shooting Mode (except FinePix A610) You can select the most suitable setting according to the subject by selecting one of the Shooting modes. Turn the mode dial and select the shooting mode. Z Selecting Scene position setting (? Scene Position) You can choose from various types (,, ., 8, , , , , , , , , , s) of scene. Select the scene position setting in the [ SCENE POSITION] in the [SHOOTING MENU]. See p.43 for information on the available . Photography functions: * [q AUTO] (➝p.
MANUAL LANDSCAPE SPORT NIGHT Clear scenic shots SET CANCEL C Press n or o to select [ POSITION]. SCENE Advanced Features — Photography B Press MENU/OK to open the menu. D Press q. E Press n or o to select the setting. F Press MENU/OK to confirm the setting.
Shooting Mode This section describes the available shooting modes. Note that the availability of a shooting mode and its setting method may vary depending on the mode you wish to use. (➝p.45, 46) [AUTO] This is the easiest mode for providing crisp and clear shots. Use this mode for ordinary photography. Camera specifies [ EXP. COMPENSATION] and [ WHITE BALANCE] settings automatically. [ BABY MODE] This function is suitable for taking pictures of young children.
Setting the mode (➝p.45, 46) CAUTION [m PORTRAIT] Use this mode for photography to get beautiful skin tones and soft overall tone. [. SPORT] Use this mode to take pictures of a moving subject. It gives priority to faster shutter speeds. Advanced Features — Photography • Using the [ DIGITAL ZOOM] allows you to enlarge your subject and shoot it. However, it will lower your image quality. Set the [ DIGITAL ZOOM] when requiring it.
Shooting Mode [ NATURAL LIGHT] (except FinePix A610) This mode produces beautiful images that retain the natural ambience when shots are taken in low-light conditions. This mode is also ideal for shooting indoor or situations where the flash cannot be used. Camera sets the high-sensitivity setting when selecting the Natural light mode. This mode is effective for reducing camera shake and moving-subject blurring when taking pictures in low-light conditions.
Setting the mode (➝p.45, 46) [ SUNSET] Use this mode to shoot sunset, making the colors more vivid. [ FLOWER] CHECK [ • Flash cannot be used in the Flower mode. • Focal range Wide angle: Approx. 10 cm to 2 m (3.9 in. to 6.6 ft.) Telephoto: Approx. 26 cm to 2 m (10.2 in. to 6.6 ft.) Wide angle: Approx. 10 cm to 2 m (3.9 in. to 6.6 ft.) Telephoto: Approx. 35 cm to 2 m (13.8 in. to 6.6 ft.
Shooting Mode [ MUSEUM] Use this mode for taking pictures in places such as museum where the use of flash and making an operation sound and a shutter sound are restricted. Flash mode is forcibly set to Suppressed flash and operation sound, shutter sound and the self-timer lamp are off. MEMO Check whether photography is permitted before using this mode. [ TEXT] Use this mode to shoot documents and white board. It is effective for taking clearer shots of letters. 52 Setting the mode (➝p.
e Macro (Close-up) Use this mode to take close-up shots. Available Photography modes: s, [AUTO], , , , (➝p.48, 50, 51, 52) CAUTION , , Press e (p) to select Macro mode. Press e (p) again to cancel Macro mode. 4 e appears on the LCD monitor indicating that you can take close-up shots. and are not available on the FinePix A610. CHECK • Focal range Wide angle: Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.) Telephoto: Approx. 26 cm to 80 cm (10.2 in.
d Setting the Flash (Intelligent Flash) Flash photography is useful for taking pictures at night or indoor dark locations. Choose from 6 flash modes according to the type of shot. See p.55 for information on the available Photography modes. MEMO By calculating subject distance and brightness, the camera automatically adjusts the flash amount to suit shooting conditions. This maintains consistent balance of bright/dark areas across the image in low-light conditions (dimly-lit room, etc).
CAUTION CHECK In bright scenes, overexposure may occur. List of available flash modes in each Photography mode ( , b, and are not available on the FinePix A610). CHECK CAUTION Notes on using flash • If pressing the shutter button while the flash is charging (indicator lamp blinking orange), the picture will be taken without the flash (when using [AUTO] and b). • The flash charging time may increase when the batteries are low on charge.
* Self-Timer The self-timer is used in situations where the photographer is included in the shot. When photographer is away from the camera, use a tripod to prevent camera fall. Available Photography modes: All (➝p.48-52) Setting self-timer The self-timer setting changes each time you press * (o). Taking pictures using self-timer 1 Press the shutter button down halfway to focus on the subject and press the shutter button fully.
2 Take pictures in selected time. Using the 2-second self-timer This is useful when you worry about camera shake even if attaching the camera on a tripod. A picture is taken after the self-timer lamp changes from lit to blinking (only blinks with the 2-second selftimer). • To stop the self-timer, once it has started running, press DISP/BACK.
j Increasing Monitor Brightness Use this function to increase the brightness of the LCD monitor temporarily when you have difficulty seeing the monitor in low-light conditions or in daylight. Increasing the LCD monitor brightness Press j (n) to display the LCD monitor brightly. Press j (n) again to return to normal LCD monitor brightness. AUTO 124 UP 58 blinks on the LCD monitor when the function is on. MEMO • This function is automatically canceled after each shot.
Using [SHOOTING MENU] Use the [SHOOTING MENU] to adjust image quality. You can take pictures in a wide range of conditions. SHOOTING MENU SCENE POSITION Setting the [SHOOTING MENU] AUTO ISO QUALITY EXP. COMPENSATION ISO WHITE BALANCE M N EXP. COMPENSATION WHITE BALANCE * FinePix A800 AUTO QUALITY AUTO C Press q. * FinePix A800 A Press MENU/OK to open the [SHOOTING MENU]. D Press n or o to change the setting.
Using [SHOOTING MENU] Z List of SHOOTING MENU options (FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800) Menu Factory default Settings SCENE POSITION] (➝p.46) This setting can be used when the Mode dial is set to ?. Use this setting to provide the best photography menu setting for the scene being shot. [ ISO] (➝p.63) Specifies required sensitivity setting of the ambient light around the subject.
MEMO Note that the shooting menu will vary depending on the selected shooting mode. • When shooting mode is set to q, , , b, , m. • When shooting mode is set to ,, ., 8, , , , , , , , , , (mode dial set to ?). SHOOTING MENU QUALITY SET - UP SHOOTING MENU AUTO N SHOOTING MENU SCENE POSITION SCENE POSITION ISO QUALITY SET - UP AUTO N ISO M AUTO QUALITY N EXP. COMPENSATION WHITE BALANCE AUTO Continued Q Advanced Features — Photography ISO • When shooting mode is set to s (mode dial set to ?).
Using [SHOOTING MENU] Z List of [SHOOTING MENU] options (FinePix A610) Menu Functions Settings [ SHOOTING MODE] (➝p.45) Use this setting to provide the best photography menu setting for the scene s/[AUTO]/ /m/ being shot. ,/./8/ / / / / / / / / [AUTO] [ ISO] (➝p.63) Specifies required sensitivity setting of the ambient light around the subject. [AUTO]/[400]/[200]/ The larger value of the sensitivity, the higher sensitivity is obtained.
[SHOOTING MENU] Changing the sensitivity setting ([ ISO]) CHECK Settings [AUTO]/[800]/[400]/[200]/[100] Selecting [AUTO] as the sensitivity setting, the camera selects the best sensitivity setting for the subject’s brightness. [AUTO]/[400]/[200]/[100] The selected sensitivity setting appears on the M 124 ISO 100 LCD monitor when the sensitivity setting is set to another setting excluding [AUTO].
[SHOOTING MENU] Setting the menu (➝p.59) Changing the quality setting ([ QUALITY]) Z Quality settings in Photography mode (FinePix A825/FinePix A820/FinePix A800) Quality mode i F (3296 × 2472) Printing at up to 10R (25.4 × 30.5 cm/ i N (3296 × 2472) 10 × 12 in.) / A4 size / A3 size For better quality, select i F % (3504 × 2336) Z Quality settings in Photography mode (FinePix A920/FinePix A900) 4 (2304 × 1728) Printing at up to 6R (15.2 × 20.3 cm/ 6 × 8 in.
Setting the menu (➝p.59) Area shot and quality setting Area shot excluding % AUTO N 4 Area shot with % AUTO 4 MEMO • The bigger the number of recorded pixels, the better the image quality becomes. As the number of recorded pixels becomes smaller, you will be able to record more frames to a Memory Card. • The quality setting is retained even when the camera is turned off or the mode setting is changed. • When changing the quality setting, the number of available frames also changes (➝p.143-146).
[SHOOTING MENU] Setting the menu (➝p.59) Adjusting exposure compensation ([ EXP. COMPENSATION]) Guide to compensation • Backlit portraits: +2/3 EV to +1 2/3 EV Available Photography mode: s (➝p.52) Use this menu for shots to get the correct brightness (exposure), such as shots with extremely high contrast between the subject and the background. EXP.
Setting the menu (➝p.59) Adjusting color balance ([ WHITE BALANCE]) Available Photography mode: s (➝p.52) Adjust the color balance based on white to suit the color of the ambient light around the subject.
Using [PLAYBACK MENU] Use this menu to play back photographed images. PLAYBACK MENU Setting the [PLAYBACK MENU] ERASE BACK FRAME ALL PRINT ORDER (DPOF ) FRAMES SLIDE SHOW A Press w to set the camera to Playback mode (➝p.36). PROTECT COPY * FinePix A800 PLAYBACK MENU ERASE E Press n or o to change the setting. SLIDE SHOW PRINT ORDER (DPOF ) PROTECT COPY F Press MENU/OK to confirm the setting. * FinePix A800 B Press MENU/OK to open the [PLAYBACK MENU]. C Press n or o to select the menu. D Press q.
[PLAYBACK MENU] Setting the menu (➝p.68) Sending and receiving images ([ IR COMMUNICATION]) (FinePix A920/FinePix A900/ FinePix A825/FinePix A820 only) IR D Press MENU/OK. MEMO You can specify the infrared transmission setting in the [SET-UP] menu. See p.89, 91 for information on specifying the infrared transmission setting. CHECK Z Select the menu Refer to the manual provided with each device for more information.
[PLAYBACK MENU] Setting the menu (➝p.68) Sending image data IR COMMUNICATION CONNECTING Sending image data to a FUJIFILM digital camera is shown as an example here. You can send the data to another device in the same way. IR COMMUNICATION CANCEL TRANSMIT CANCEL RECEIVE A Turn the camera on. D Press MENU/OK to begin transmission. When transmission is completed, [TRANSMISSION COMPLETED] will appear on the LCD monitor. CAUTION B Press p or q to select the sending frame (file).
Setting the menu (➝p.68) Receiving the image data IR COMMUNICATION CONNECTING Receiving the image data from a FUJIFILM digital camera is shown as an example here. You can receive data from another device in the same way. IR COMMUNICATION CANCEL RECEIVE A Turn the camera on. Continued Q B Press p or q to select the sending frame (file). Advanced Features — Playback TRANSMIT CANCEL D Press o to begin transmission. When transmission is completed, [DATA RECEIVED] will appear on the LCD monitor.
[PLAYBACK MENU] CAUTION • Movie images cannot be transmitted. • If the QUALITY of sending image data is over 3, QUALITY of the image will be set to 3. • If [COMMUNICATION ERROR], [CANNOT BE TRANSMITTED], or [CANNOT BE RECEIVED] appears, press MENU/OK or o to retransmit the image data, or press DISP/BACK to cancel transmitting. • Do not place anything between the transmitting and receiving device.
Setting the menu (➝p.68) Setting automatic playback ([ SLIDE SHOW]) Use this mode to play back photographed images continuously. You can select playback interval and type of image transition. DPOF set frame ([ PRINT ORDER (DPOF)]) You can specify the image, number of prints, with or without date of printing with a DPOF-compatible printer. PLAYBACK MENU ERASE PLAYBACK MENU PROTECT COPY * FinePix A800 COPY * FinePix A800 MEMO • To interrupt [ SLIDE SHOW], press MENU/OK.
[PLAYBACK MENU] Setting the menu (➝p.68) [WITH DATE] / [WITHOUT DATE] Selecting [WITH DATEE], E appears on the LCD monitor and the date will be imprinted on your prints. PRINT ORDER (DPOF DPOF) DPOF : 00009 Total number of prints Setting for that frame MEMO Canceling DPOF setting A Press MENU/OK to open the [PLAYBACK MENU] and press n or o to select [ PRINT ORDER (DPOF)]. B Press q. C Press n or o to select [WITH DATE E] or [WITHOUT DATE] and press MENU/OK to display the print order screen.
Setting the menu (➝p.68) MEMO • When DPOF settings were specified on another camera. [RESET ALL] To cancel all DPOF settings: RESET DPOF OK? YES RESET DPOF OK? NO CANCEL Select [RESET ALL] in the [PLAYBACK MENU] (➝p.73). Press MENU/OK. MEMO CAUTION • Pressing DISP/BACK while choosing settings will cancel all current settings. If there were previous DPOF settings, only the modifications are canceled.
[PLAYBACK MENU] Setting the menu (➝p.68) Z [u PRINT ORDER (DPOF)] DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications for images shot using a digital camera on media such as a Memory Card. The recorded specifications include information on which frames are to be printed. This section gives a detailed description of how to order your prints with FinePix A920/FinePix A900/FinePix A825/ FinePix A820/FinePix A800/FinePix A610.
Setting the menu (➝p.68) Protecting the images ([ PROTECT]) [SET ALL] Use this mode to prevent frames (files) from being accidentally erased. Your camera calls images “frames”. SET ALL OK? IT MAY TAKE A WHILE [FRAME] (set or reset a frame) YES To protect or unprotect only the selected frame (file): UNPROTECT OK? Press MENU/OK to protect all the frames (files).
[PLAYBACK MENU] Setting the menu (➝p.68) MEMO To stop the procedure midway Copying the images ([ COPY]) It is possible to transfer saved images between the internal memory and a Memory Card. Your camera calls images “frames”. CANCEL If the images are very large, protecting or unprotecting all the frames (files) may take some time. If you want to take a picture or record a movie during the procedure, press DISP/BACK.
Setting the menu (➝p.68) Copying one frame at a time ([FRAME]) COPY OK? 100 - 0001 COPY INTERNAL MEMORY CARD CARD FRAME ALL FRAMES INTERNAL MEMORY YES YES CANCEL CANCEL A Press n or o to select [FRAME]. D Press MENU/OK to copy the currently displayed frame (file). B Press MENU/OK. MEMO To copy another frame (file), repeat steps C and D. When copying frames (files) is completed, press DISP/ BACK. Advanced Features — Playback C Press p or q to select the copying frame (file).
[PLAYBACK MENU] Setting the menu (➝p.68) Copying all frames ([ALL FRAMES]) COPY ALL OK? 100 - 0001 IT MAY TAKE A WHILE COPY 100 - 0001 INTERNAL MEMORY CARD CARD COPY FRAME ALL FRAMES INTERNAL MEMORY YES YES CANCEL CANCEL C Press MENU/OK to copy all the frames (files). A Press n or o to select [ALL FRAMES]. CAUTION B Press MENU/OK. 80 • When [\ MEMORY FULL] or [Y MEMORY FULL] appears on the LCD monitor, copying the data stops on the way.
Setting the menu (➝p.68) Rotating the images ([ IMAGE ROTATE]) IMAGE ROTATE When shooting in the vertical position, the image appears horizontal on the LCD monitor. Use this mode to rotate an image and to display correct direction. CAUTION MEMO An image can be rotated only when playing back using FinePix A920/FinePix A900/FinePix A825/FinePix A820/ FinePix A800/FinePix A610.
[PLAYBACK MENU] Setting the menu (➝p.68) Trimming the images ([ TRIMMING]) (except FinePix A610) 2 ] wide zoom (Zoom out) Use this mode to trim the required part of the photographed image. 1 Specify trimming part of image. [ tele zoom (Zoom in) TRIMMING TRIMMING Select the menu. A Press w to set the camera to Playback mode (➝p.36). YES CANCEL YES CANCEL Zoom bar A Set the zoom switch to [ or ] to zoom in or out of an image. B Press p or q to select the trimming frame (file).
Setting the menu (➝p.68) MEMO C Press MENU/OK. REC OK? 3 [ Printing at up to 10R (25.4 × 30.5 cm/10 × 12 in.) / A4 size 3 Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) / A5 size 2 Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) / A6 size ` To use for e-mail or web site CANCEL Record the image. Check the saved image size and press MENU/OK. The trimmed image is added as a separate file in the final frame. Image sizes (FinePix A825/FinePix A820/FinePix A800) 4 Printing at up to 6R (15.2 × 20.
r Recording Movies Use this mode to record movies. Note that the way to set the Movie mode vary depending on model. See the instructions below and follow the one which applies to your camera. Set the camera to r Movie mode (except FinePix A610) Set the Mode dial to r. Set the camera to r Movie mode (FinePix A610) MOVIE MANUAL AUTO BABY MODE Movie recording SET CHECK CANCEL A Press MENU/OK to open the menu. B Press n or o to select [ MODE]. SHOOTING C Press q. D Press n or o to select [r MOVIE].
Z Zooming the image You must zoom beforehand as you cannot zoom during recording. STANDBY Record movies REC 13s 12s Zoom bar Fully pressed Press the shutter button down fully to start recording. During recording, [lREC] and a counter that shows the remaining time appear on the LCD monitor. CHECK • Optical zoom focal length Approx. 39 mm to 156 mm (35 mm camera equivalent) Max. zoom scale: 4× • Focal range Approx. 60 cm (2.0 ft.
r Recording Movies CHECK Recording movies CAUTION • Specifications: Motion JPEG (➝p.148). Monaural sound without sound • Quality selection method: $ (320 × 240 pixels) • Frame rate (➝p.148): 30 frames per second (fixed) • You may not be able to record a movie with sound when using FinePix A610. Check the “Specifications” in the “CHECK Recording movies” in the left column.
w Playing Back Movies Setting the camera to w Playback mode (➝p.36) Z Playing back movies Control 100 - 0002 Playback 12 / 31 / 2050 PLAY 10:00 AM Pauses the movie during playback. Press o again to resume playback. Stop Stops playback. Press p or q while playback is stopped to go back to the previous file or advance to the next file respectively. B Press o to begin playing back movie. STOP PAUSE The playback time appears on the LCD monitor along with a progress bar.
w Playing Back Movies MEMO If the subject of the shot is very bright, white vertical streaks or black horizontal streaks may appear in the image during playback. This is normal. CAUTION • You may not be able to record movie with sound when using FinePix A610. Check the “Specifications” in the “CHECK Recording movies” on p.86. • You may not be able to play back some movie files recorded on other cameras.
[ SET-UP] Using the [SET-UP] menu 1 3 Change the setting. Open the [SET-UP] menu. SET - UP FORMAT / LANG. AUTO POWER OFF TIME DIFFERENCE VIDEO SYSTEM A Press MENU/OK to open the menu. B Press n or o to select [ 5 MIN 2 MIN OFF * FinePix A800 SET-UP]. A Press n or o to select the menu. C Press q. B Press q. Different type of screen appears depending on selected item. Change the page. Settings 2 SET - UP FORMAT / LANG.
[ SET-UP] SET-UP How to use the [SET-UP] menu (➝p.89) [SET-UP] menu option CAUTION Note that the [SET-UP] menu will vary depending on the camera model. The table below shows the [SET-UP] menu of the FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800. Note that the [SET-UP] menu on the FinePix A610 is displayed only on page q, , and . Setting Display Factory default Explanation Page Sets the way for displaying the check image screen (photograph result) after taking a picture.
How to use the [SET-UP] menu (➝p.89) Setting [ Display FORMAT] [ – ] Factory default – [ENGLISH] Explanation Page Initializes a Memory Card or internal memory. Select this menu to erase all the frames (files). Specifies the language used for LCD monitor display. AUTO POWER OFF] [5 MIN]/[2 MIN]/[OFF] [2 MIN] [ TIME DIFFERENCE] N/I N [NTSC]/[PAL] – Specifies whether video output is set to NTSC or PAL. Discharges Ni-MH batteries.
[ SET-UP] SET-UP How to use the [SET-UP] menu (➝p.89) CHECK [FRAME NO.] Frame number Use this function to specify whether frame numbers are assigned consecutively from previous numbers or begin again. <[CONT.]> File number <[RENEW]> A B * Formatted Memory Card or internal memory used for both A and B. [CONT.] : Pictures are stored beginning from the highest file number stored on the last Memory Card or internal memory used.
How to use the [SET-UP] menu (➝p.89) CAUTION [DIGITAL ZOOM] Use this function to shoot enlarged images than maximum optical zoom scale. AUTO CHECK N 124 Zoom bar Z Zoom bar display FinePix A920/FinePix A900/FinePix A825/FinePix A820 Optical zoom: 4× ON Digital zoom: approx. 7.6× FinePix A800/FinePix A610 OFF Z FinePix A920/FinePix A900/FinePix A825/FinePix A820 • Optical zoom focal length* Approx. 39 mm to 156 mm • Digital zoom focal length* Approx. 156 mm to 1186 mm Max. zoom scale: approx. 7.
[ SET-UP] SET-UP Z FinePix A610 • Optical zoom focal length* Approx. 39 mm to 117 mm • Digital zoom focal length* Approx. 117 mm to 721 mm Max. zoom scale: approx. 6.2× • Digital zoom focal length (%)* Approx. 120 mm to 741 mm Max. zoom scale: approx. 6.2× * 35 mm camera equivalents How to use the [SET-UP] menu (➝p.89) [PLAYBACK VOLUME] (except FinePix A610) Use this function to adjust volume while playing back movie.
How to use the [SET-UP] menu (➝p.89) [LCD BRIGHTNESS] [FORMAT] Use this function to adjust the LCD monitor brightness. Initialize (format) the Memory Card or internal memory for use with the camera. LCD BRIGHTNESS FORMAT FORMAT OK? 0 ERASE ALL DATA OK SET CANCEL CANCEL SET B Press MENU/OK to confirm the setting. A Press p or q to select OK. B Pressing MENU/OK initializes the Memory Card or internal memory. Settings A Press n or o to adjust the LCD monitor brightness.
[ SET-UP] SET-UP How to use the [SET-UP] menu (➝p.89) [AUTO POWER OFF] [TIME DIFFERENCE] When this function is active and the camera remains unused for 2 or 5 minutes, it turns camera off. Use this function when you want to get the maximum possible running time from your batteries. Use this function when traveling to destinations in different time zones. This function sets a time difference relative to the date and time currently set.
How to use the [SET-UP] menu (➝p.89) 2 Move to [TIME DIFFERENCE] screen. SET - UP CHECK Available time setting –23:45 to +23:45 (in 15-minute increments) MEMO FORMAT AUTO POWER OFF TIME DIFFERENCE VIDEO SYSTEM HOME LOCAL M N 124 * FinePix A800 12 / 31 / 2050 Press q. 3 CHECK Set time difference. Upon returning from a trip, always change the time difference setting back to [N HOME] and then check the date and time again.
Connecting to a TV (FinePix A610) When connecting to a TV, images can be displayed on wider screen. Using slide show function (➝p.73) together, you can have fun with folks. Plug the Video cable (included) into the VIDEO OUT (Video output) socket of the camera. To video (yellow) input socket Video cable (included) AC-3VX (sold separately) Plug the other end of the cable into the Video input socket on the TV.
Connecting to a TV (except FinePix A610) When connecting to a TV, images can be displayed on wider screen. Using slide show function (➝p.73) together, you can have fun with folks. Plug the A/V cable (included) into the A/V OUT (Audio/Visual output) socket of the camera. Video (yellow) A/V cable (included) AC-3VX (sold separately) To terminals Audio (white) Plug the other end of the cable into the audio/video input socket on the TV.
Connecting Camera Directly to Printer — PictBridge Function When a printer that supports PictBridge is available, images can be printed by connecting the camera directly to the PictBridgecompatible printer without a PC. 2 [ USB] appears on the LCD monitor. USB Connecting to a printer 1 Connect the camera to a printer and turn the printer on. Press w for about 1 second to turn the camera on. Connect the camera to your printer using the USB cable (mini-B).
Specifying images for printing ([PRINT WITH DATE] / [PRINT WITHOUT DATE]) PRINT THESE FRAMES TOTAL : 9 SHEETS PICTBRIDGE TOTAL : 00002 YES D Press MENU/OK again to download the data to the printer and start printing the specified number of prints. 02 SHEETS FRAME OK CANCEL SET MEMO Even if MENU/OK is pressed with total number of images set at 0 (zero), the screen printing once appears on the LCD monitor. Press MENU/OK again and printing starts. B Press n or o to set a value.
Connecting Camera Directly to Printer — PictBridge Function Printing with DPOF setting ([u PRINT DPOF]) PRINT DPOF OK? TOTAL : 9 SHEETS PICTBRIDGE PRINT WITH DATE PRINT WITHOUT DATE PRINT DPOF YES CANCEL D Press MENU/OK again to download the data to the printer and start printing the specified frames (files) continuously. A Press DISP/BACK to open the menu. B Press n or o to select [u PRINT DPOF].
MEMO MEMO PRINTING DPOF setting can be specified for images on internal memory. CAUTION CANCEL Press DISP/BACK to cancel the printing. Depending on the printer, the printing may not be canceled immediately or printing may stop midway through. When printing stops midway, briefly turn the camera off and then on again. Camera Connection Disconnecting the printer A Check that [PRINTING] is not displayed on the camera’s LCD monitor. B Turn the camera off. Unplug the USB cable (mini-B).
Installation on a Windows PC Pre-installation checklist Z Hard ware (software) requirements and recommended system To run this software, you must have the hardware and software described below. Check your system before you begin the installation.
Do not connect the camera to your PC until the software installation is completed. 1 Install FinePixViewer as instructed by the on-screen instructions. For Windows Vista users: When loading the bundled CD-ROM on your PC, the [AutoPlay] window may appear. In this case, click [SETUP.exe]. When [User Account Control] window appears, click [Allow]. 2 Launching the installer manually A Double-click the [My Computer] icon. * Windows XP users should click [My Computer] in the [Start] menu.
Installation on a Mac OS X Pre-installation checklist Z Hardware and software requirements To run this software, you must have the hardware and software described below. Check your system before you begin the installation. Compatible Mac*1 Power Macintosh G3*2, PowerBook G3*2, Power Macintosh G4, iMac, iBook, Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5, MacBook, MacBook Pro, or Mac mini Operating System Mac OS X (compatible with version 10.3.9 to 10.4.
1 Turn your Macintosh on and start up Mac OS X. Do not launch any other applications. 2 When the bundled CD-ROM is loaded into the CD-ROM drive, the [FinePix] icon appears. Double-click the [FinePix] icon to open the [FinePix] volume window. 3 4 Double-click on [Installer for MacOSX]. The Installer setup dialog appears. Click the [Installing FinePixViewer] button. CAUTION For more information on what is installed, click the [Read Me First] button and [Using FinePixViewer] button.
Installation on a Mac OS X 7 The [FinePixViewer installation completed] message dialog appears. Then click exit button and close it. CAUTION When Safari is used as the Web browser, a message may be displayed and the CD-ROM may not be removed. If this happens, click the Safari icon in the Dock to make Safari the active application and then select [Quit Safari] in the [Safari] menu to shut down Safari. 8 Launch [Image Capture] from the [Applications] folder. 9 Change the Image Capture settings.
Connecting to a PC By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using “FinePixViewer” performs images saving, browsing and file management etc. FinePixViewer Overview Enables importing images, managing files and folders, and ordering prints using the internet (only Windows users). CAUTION • Do not format the Memory Card in the camera on the PC. • Use the Memory Card with images taken by a FUJIFILM Digital camera.
Connecting to a PC 110 CAUTION CAUTION • FinePix A920, FinePix A900, FinePix A825, FinePix A820, FinePix A800 and FinePix A610 is compatible with PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol). A PTP/MTP-compatible camera is a camera that can recognize the PC and printer automatically when connected. • Do not disconnect the USB cable (mini-B) when the camera is communicating with a PC.
The following steps differ depending on the PC’s operating system (Windows 2000/XP/ Vista case) When your PC recognizes the camera automatically, FinePixViewer S automatically starts up and the Load photos window appears. Follow the instructions provided on screen to save the images. To proceed without saving the images, click the [Menu] button. CAUTION When there are many images stored on a Memory Card, it takes a while to display on the screen of your PC.
Connecting to a PC Using FinePixViewer Mastering FinePixViewer For all information on FinePixViewer functions, refer to [How to Use FinePixViewer] in the Help menu for details. • What is explained in [How to Use FinePixViewer]... [How to Use FinePixViewer] covers a range of topics, including batch processing and ordering prints. Example: Looking up slide shows A Click [How to Use FinePixViewer] in the FinePixViewer Help menu. B Click [Basic Operation] and then click [Slide Show] in the menu that appears.
D When the message appears, click the [OK] button. Check your selection carefully since the process cannot be canceled once you click the [OK] button. Macintosh Quit FinePixViewer. Then drag the installed FinePixViewer folder to the Trash and select [Empty Trash] in the [Finder] menu.
System Expansion Option By using FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800/FinePix A610 together with other optional FUJIFILM products, your system can be expanded to fill a wide range of uses. Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
Accessories Guide Visit the FUJIFILM web site for the latest information on camera accessories. http://www.fujifilm.com/products/digital_cameras/index.html Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability. • xD-Picture Card Use the following xD-Picture Cards: 256MB/512MB/1GB/2GB There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model number, such as DPC-M2GB).
Accessories Guide • PC Card Adapter DPC-AD The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard ATA-compliant (PCMCIA 2.1) PC card (Type u). - Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB. This is not compatible with the SD Memory Card. • CompactFlash™ Card Adapter DPC-CF Loading an xD-Picture Card into this adapter allows you to use the card as a CompactFlash card (Type s).
Using Your Camera Correctly Read this information and the “Safety Notes” (➝p.156), to make sure you use your camera correctly.
Power Supply and Batteries Applicable Batteries • In the camera, use AA-size alkaline or Ni-MH (nickelmetal hydride) rechargeable batteries. Do not use AA-size manganese, nickel-cadmium (NiCd) or lithium batteries in your FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800/ FinePix A610 because the heat created by the batteries could damage the camera or cause it not to work. • The life of alkaline batteries varies between brands.
Using the AA-size Ni-MH batteries correctly CAUTION Do not use the “Discharging rechargeable batteries” function when alkaline batteries being used. • To charge Ni-MH batteries, use the quick battery charger (sold separately). Refer to the instructions supplied with the charger to make sure that the charger is used correctly. • Do not use the battery charger to charge other batteries. • Note that the batteries feel warm after being charged.
Power Supply and Batteries AC Power Adapter Always use the AC Power Adapter AC-3VX with the camera. The use of an AC power adapter other than AC-3VX can be damaged to your digital camera. • Use the AC power adapter for indoor use only. • Plug the connection cord plug securely into the DC input terminal of the FUJIFILM Digital camera. • Turn off the FUJIFILM Digital camera before disconnecting the cord from the FUJIFILM Digital camera’s DC input terminal. To disconnect, pull out the plug gently.
To discharge rechargeable batteries: SET - UP PLAYBACK MENU IMAGE ROTATE DISCHARGE RESET TRIMMING SET - UP * FinePix A800 A Press w for about 1 second to turn the camera on. * FinePix A800 E Press p or q to select on the FinePix A610.). (Select B Press MENU/OK to open the menu. F Press n or o to select [ C Press n or o to select [ DISCHARGE]. SET-UP]. G Press q. D Press q to open the [SET-UP] menu.
Power Supply and Batteries DISCHARGE DO NOT EXECUTE WITH NON Ni - MH RECHARGEABLE BATTERIES YES CANCEL H Press MENU/OK. DISCHARGE DISCHARGE OK? IT MAY TAKE A WHILE FOR DISCHARGING OK CANCEL SET I Press p or q to select OK. J The screen changes and discharging begins. When the battery level indicator blinks red and discharging ends, the camera turns off. CAUTION To cancel discharging, press DISP/BACK.
Notes on the xD-Picture Card™, the SD Memory Card and the Internal Memory Z Handling Memory Card • When inserting the Memory Card into the camera, hold the Memory Card straight as you push it in. • Never remove the Memory Card or turn the camera off during data recording or erasing (Memory Card formatting) as this could be damaged to the Memory Card. • The use of xD-Picture Cards is recommended with FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800/FinePix A610.
Warning Displays The table below lists the warnings that are displayed on the LCD monitor. Warning Displayed (Lit red) V (Blinking red) | Explanation Load new or fully charged batteries. There is a strong likelihood of camera shake because the shutter speed is slow. Use flash photography. A tripod may be recommended, depending on the scene and mode. The AF (autofocus) cannot work effectively. • If the image is too dark, take the picture at a distance of around 2 m (6.6 ft.) from the subject.
Warning Displayed Explanation • The Memory Card contact area is soiled. • The Memory Card format is incorrect. [CARD ERROR] [\ MEMORY FULL] • Camera fault. • The Memory Card is damaged. • Inserted Memory Card is not compatible with your • Insert a compatible Memory Card that is operationcamera. checked at FUJIFILM Corporation (➝p.21). The internal memory or Memory Card is full. [Y MEMORY FULL] [WRITE ERROR] [PROTECTED CARD] Remedy • Wipe the contact area on the Memory Card with a soft, dry cloth.
Warning Displays Warning Displayed Explanation Remedy • The played back file was not recorded correctly. • The Memory Card contact area is soiled. [READ ERROR] • This file cannot be played back. • Wipe the contact area on the Memory Card with a soft, dry cloth. It may be necessary to format the Memory Card (➝p.95). If the message still appears, replace the Memory Card. • Camera fault. • Contact your FUJIFILM dealer.
Warning Displayed Explanation Remedy An attempt was made to rotate a movie or an image These images cannot be rotated by image formats. [CAN NOT ROTATE] shot using a camera other than FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800/ [r CAN NOT ROTATE] FinePix A610. The camera is not connected to a PC or printer. • Check that the USB cable (mini-B) is connected correctly. • Check that your PC or printer is turned on.
Warning Displays Warning Displayed Explanation Displayed for PictBridge. [CANNOT BE PRINTED] 128 Remedy • Refer to the user manual for the printer being used and check whether the printer supports the JFIFJPEG or Exif-JPEG image format. If not, the printer cannot print the images. • Movie images cannot be printed. • Was the image data photographed using FinePix A920/FinePix A900/FinePix A825/FinePix A820/ FinePix A800/FinePix A610? You may not be able to print some images photographed on other cameras.
Troubleshooting Z Getting ready Matters Problems Nothing happens when pressing POWER. Batteries and power supply Batteries run out quickly. Power cuts out during operation. Possible causes The batteries have run out. Solutions Load new or fully charged batteries. Page 18, 20, 118 The batteries are loaded backward. Load the batteries in the correct direction. 19 The battery cover is not closed securely. Close the battery cover securely.
Troubleshooting Z Shooting Matters Basic operations Problems No photograph is taken when pressing the shutter button. The LCD monitor darkens after taking a picture. Focusing Macro 130 Camera has difficulty in focusing on the subject. Cannot set the camera to Macro (close-up) mode. Solutions Page The Memory Card or internal memory is full. Possible causes Insert a new Memory Card or erase some unnecessary frames. 21, 40 The Memory Card or internal memory is not formatted.
Matters Problems Possible causes Solutions Page The shutter button was pressed while the Wait until the charging is completed flash was charging. before pressing the shutter button. Cannot use the flash. Flash The Shooting mode is set to , , or . , ,, Photographed images The image is blurred. 45, 46 The batteries have run out. Load new or fully charged batteries. The flash is set to [C SUPPRESSED FLASH] mode. Set to another flash mode excluding the [C SUPPRESSED FLASH] mode.
Troubleshooting Z Shooting Matters Problems Possible causes AC power adapter was connected or Photographed disconnected during turning the camera Recording images images or movies on. are not recorded. Solutions Connect or disconnect the AC power adapter only when the camera is off. Failing to turn the camera off first can result in damage to the Memory Card or malfunctions during PC connection. Page 98, 99, 120 Z Playing back Matters Problems Possible causes The camera volume is set too low.
Z Connecting Matters Problems Possible causes The camera is not connected to the TV correctly. Connecting to TV Page The included video cable or A/V cable was After the movie playback mode is stopped, connect the camera and TV There is no image connected during movie playback. correctly. or sound on the TV. “TV” is selected as the TV input. Set the TV input to “VIDEO”. The TV image is black and white. PC does not Connecting to PC recognize the camera.
Troubleshooting Z Others Matters Problems Possible causes Camera malfunction may be caused temporarily. Nothing happens when pressing the buttons on the camera. The batteries have run out. Camera operation etc. The camera no longer works correctly. 134 Camera malfunction may be caused temporarily. Solutions Page Briefly remove the batteries or disconnect the AC power adapter. Then reload the 18, 19, batteries or reconnect the AC power 20, 120 adapter and try again.
Specifications Z FinePix A920 / FinePix A900 / FinePix A825 / FinePix A820 System Model Digital camera FinePix A920/ Digital camera FinePix A900 Digital camera FinePix A825 / Digital camera FinePix A820 Effective pixels 9.03 million pixels 8.3 million pixels CCD 1/1.6-inch Super CCD HR Storage media Internal memory (approx. 10 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB) /SD/SDHC Memory Card (FUJIFILM recommendation (➝p.21)) * The SDHC Memory Card is only usable with FinePix A920.
Specifications Z FinePix A920 / FinePix A900 / FinePix A825 / FinePix A820 System Digital camera FinePix A920/ Digital camera FinePix A900 Sensitivity AUTO/Equivalent to ISO 100/200/400/800 (Standard output sensitivity) Photometry TTL 256-zones metering Exposure control Program AE Scene position (BABY MODE)/m (PORTRAIT)/, (LANDSCAPE)/.
Z FinePix A920 / FinePix A900 / FinePix A825 / FinePix A820 System Digital camera FinePix A920/ Digital camera FinePix A900 Digital camera FinePix A825 / Digital camera FinePix A820 LCD monitor FinePix A920: 2.7 inches, Aspect ratio: 4:3; approx. 115,000 pixels Amorphous silicon TFT color LCD monitor, Approx. 100% coverage FinePix A900/FinePix A825/FinePix A820 2.5 inches, Aspect ratio: 4:3; approx. 115,000 pixels Amorphous silicon TFT color LCD monitor, Approx.
Specifications Z FinePix A800 / FinePix A610 System Model Digital camera FinePix A800 Digital camera FinePix A610 Effective pixels 8.3 million pixels 6.3 million pixels CCD 1/1.6-inch Super CCD HR 1/2.5-inch Super CCD HR Storage media Internal memory (approx. 10 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB) /SD Memory Card (FUJIFILM recommendation (➝p.21)) File format Still image: DCF-compliant Compressed: Exif ver.2.
Z FinePix A800 / FinePix A610 System Digital camera FinePix A800 Digital camera FinePix A610 Digital zoom Approx. 6.9× (3× optical zoom lens is used together: Approx. 6.2× (3× optical zoom lens is used together: Max. zoom scale: approx. 20.7×) Max. zoom scale: approx. 18.6×) Aperture (Wide-angle) F2.8/F8 Focal range Normal: approx. 50 cm (1.6 ft.) to infinity Normal: approx. 60 cm (2.0 ft.) to infinity Macro: wide-angle: approx. 10 cm (3.9 in.) to 80 cm Macro: wide-angle: approx. 10 cm (3.9 in.
Specifications Z FinePix A800 / FinePix A610 System Digital camera FinePix A800 140 Digital camera FinePix A610 White balance Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White), Fluorescent (Cool White), Incandescent) Self-timer Approx. 2 sec./10 sec. Flash type Auto flash Auto flash Effective range: ( : AUTO) Effective range: ( : AUTO) Wide-angle: approx. 50 cm-3.8 m (1.6 ft.-12.5 ft.) Wide-angle: approx. 60 cm-3.5 m (2.0 ft.-11.5 ft.
Z FinePix A920 / FinePix A900 / FinePix A825 / FinePix A820 / FinePix A800 / FinePix A610 Input/Output Terminal A/V OUT (Audio/Visual output) FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800: NTSC/PAL-type (with monaural sound) FinePix A610: NTSC/PAL-type (no sound) Digital input/output USB 2.
Specifications Power Supply and Others Camera dimensions (W/H/D) FinePix A920/Fine Pix A900/Fine Pix A825/Fine Pix A820: 97.3 mm × 61.7 mm × 32.1 mm/3.8 in. × 2.4 in. × 1.3 in. (not including accessories and attachments) Fine Pix A800/Fine Pix A610: 97.5 mm × 61.9 mm × 31.0 mm/3.8 in. × 2.4 in. × 1.2 in. (not including accessories and attachments) Camera mass (weight) FinePix A920: Approx. 161 g/5.7 oz.
Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory (FinePix A920) The number of available frames and recording time is approximate. The actual number of frames and recording time varies depending on the type of Memory Card or shooting conditions. Also, the number of frames and recording time displayed in the LCD monitor may not decrease regularly. Quality setting Number of recorded pixels Image data size Internal memory (approx.
Specifications Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory (FinePix A900) The number of available frames and recording time is approximate. The actual number of frames and recording time varies depending on the type of Memory Card or shooting conditions. Also, the number of frames and recording time displayed in the LCD monitor may not decrease regularly. Quality setting Number of recorded pixels Image data size F iN 3488 × 2616 4.5 MB 2.
Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory (FinePix A825/FinePix A820/FinePix A800) The number of available frames and recording time is approximate. The actual number of frames and recording time varies depending on the type of Memory Card or shooting conditions. Also, the number of frames and recording time displayed in the LCD monitor may not decrease regularly.
Specifications Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory (FinePix A610) The number of available frames and recording time is approximate. The actual number of frames and recording time varies depending on the type of Memory Card or shooting conditions. Also, the number of frames and recording time displayed in the LCD monitor may not decrease regularly.
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC-M2GB, movie recording time may be reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the xD-Picture Card before use. Back up important frames (files) onto your PC or another media. * These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from errors in this Owner’s Manual.
Explanation of Terms Deactivated batteries Leaving an Ni-MH battery unused in storage for a long period may cause a rise in the level of substances that inhibit current flow inside the battery and result in a dormant battery. A battery in this state is referred to as deactivated. Because current flow is inhibited in a deactivated Ni-MH battery, the battery’s original level of performance cannot be achieved. EV A number denotes Exposure Value.
FUJIFILM Digital Camera Worldwide Network If you have technical questions or if you need repair service, ask the following local distributor. Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty. There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with. These lists are subject to change without notice. NORTH AMERICA Canada U.S.A.
FUJIFILM Digital Camera Worldwide Network Ecuador Importaciones Espacri Cia. Ltda. Technical support & Repair service Simón Bolivar 5-69 y Hno. Miguel - Cuenca TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec Mexico Fujifilm de Mexico, S.A. de C.V. Technical support Repair service Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F. TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx Paraguay Errece S.R.L.
Cyprus Doros Neophytou CAMERA REPAIRS Technical support & Repair service 28B, Agiou Demetriou, Acropoli, Nicosia TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net Czech Republic Fujifilm Cz., s.r.o. Technical support U nakladoveho nadrazi 2/1949, 130 00 Praha 3 TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz Czech Republic AWH servis Repair service Milesovska 1, 130 00 Praha 3, Czech republic TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.
FUJIFILM Digital Camera Worldwide Network Malta Ciancio (1913) Co.Ltd. Technical support & Repair service Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05 TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt Netherlands Fujifilm Nederland BV Technical support Repair service Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands TEL 010-2812345 FAX 010-2812334 fuji@fujifilm.nl Norway Fujifilm Norge AS Technical support Repair service Poland Fujifilm Polska Distribution Sp. z o.o.
Sweden Fujifilm Sverige AB Technical support Repair service Switzerland / Lichtenstein Fujifilm (Switzerland) AG Technical support & Repair service Turkey Fujifilm Turkiye Sinfo A.S. Technical support Repair service U.K. Ukraine MIDDLE EAST Iran Israel FUJIFILM UK Ltd. Technical support Repair service Image Ukraine CJSC Technical support & Repair service Sveavägen 167 104 35 Stockholm TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.
FUJIFILM Digital Camera Worldwide Network Syria Al-Shahbandar P.O. Box:31180 Damascus SYRIA TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae U.A.E. Grand Stores Technical support & Repair service Yemen Al-Haidary Trading Technical support Repair service P.O.
Indonesia PT Modern Photo Tbk Technical support & Repair service Jl.Matraman Raya 12, Jakarta Timur 13150 TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012 assd_kmr@modernphoto.co.id Malaysia FUJIFILM (Malaysia) Sdn. Bhd. Technical support Repair service Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling Jaya, Selangor Darul Ehsan, Malaysia TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my Philippines YKL Development & Trdg. Corp.
Safety Notes • Make sure that you use your FinePix A920/FinePix A900/FinePix A825/FinePix A820/FinePix A800/ FinePix A610 camera correctly. Read these Safety Notes and your Owner’s Manual carefully before use. • After reading these Safety Notes, store them in a safe place. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.
WARNING Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions could damage the cord and cause a fire or electric shock. • If the cord is damaged, contact your FUJIFILM dealer. Do not place the camera on an unstable surface. This can cause the camera to fall or tip over and cause injury. Never attempt to take pictures while in motion. Do not use the camera while you are walking or driving a vehicle.
Safety Notes WARNING When discarding or storing batteries, cover the battery terminals with insulation tape. Contact with other metallic objects or batteries could cause the batteries to ignite or burst. Keep Memory Cards out of the reach of small children. Because Memory Cards are small, they can be swallowed by children. Be sure to store Memory Cards out of the reach of small children. If a child swallows a Memory Card, seek medical attention or call an emergency number.
CAUTION When you are cleaning the camera or you do not plan to use the camera for an extended period, remove the batteries and disconnect and unplug the AC power adapter. Failure to do so can cause a fire or electric shock. When charging ends, unplug the charger from the power socket. Leaving the charger plugged into the power socket can cause a fire. Using a flash too close to a person’s eyes may temporarily affect the eyesight. Take particular care when photographing infants and young children.
Memo 160
Memo 161
Memo 162
Memo 163
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.com/products/digital_cameras/index.