Digital Camera Owner's Manual
96 97
Settings
4
◆
To restore power to the camera
◆
1Press the “POWER” button to turn the camera
back on for shooting.
2Hold down the “w” button for about 1 second to
play back images.
When this function is enabled and the camera
remains unused for 2 or 5 minutes, it is turned off.
Auto power off function prevents leaving the power
on.
●
!
The Auto power off function is disabled during automatic
playing back and discharging, and when a USB connection is
being used.
î
AUTO POWER OFF
2
MIN M IN
2
MIN M IN
5
MIN M IN
OFFOF F
1
4
3
2
AUTO POWER OFFAUTO P O W E R O FF
ONON
OFFOF F
ONON
OFFOF F
OKOK
:
:
:
:
:
:
When this function is enabled, you can save power
and get the maximum possible running time from
your batteries.
The LCD monitor darkens when camera is not used
for 10 seconds.
Î
LCD POWER SAVE
2
MIN M IN
1
4
3
2
LCD POWER SAVELC D POW ER S AV E
ONON
OFFOF F
ONON
OFFOF F
OKOK
:
:
:
:
:
:
OFFOF F
ONON
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
When the LCD monitor is dark, pressing the shutter
button down halfway recovers the LCD monitor
brightness.
●
!
The LCD power save function is disabled in Continuous AF
and movie mode.
FORMATFO RM AT
SET SE T
FORMATFO RM AT OK? O K?
ERASE ALL DATAER AS E AL L DATA
OKOK
CANCELCA NC EL
ï
FORMAT
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1Press “d” or “c” to select “OK”.
2Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture
Card.
●
!
When [CARD ERROR], [WRITE ERROR], [READ ERROR]
or [CARD NOT INITIALIZED] appears, see P.122 for
information before formatting the xD-Picture Card.
01 02
LOCATIONLOCATIONLO CAT I O N
TIME DIFFERENCETI ME D IF FE RE NC E
TIME DIFFERENCETI ME D IF FE RE NC E SETSE T
TIME DIFFERENCETI ME D IF FE RE NC E
SETSE T CANCELCA NC EL
:
1Press “d”.
2Press “a” or “b” to select “TIME DIFFERENCE”.
01 02
01 02
2
ó
TIME DIFFERENCE
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
1Press “c”.
2Press “a” or “b” to change between “å” HOME
and “ß” LOCAL.
To set the time difference, select “ß” LOCAL.
å HOME: Your home time zone
ß LOCAL: Your destination time zone
LOCATIONLOCATIONLO CATI ON
LOCALLO CA L
TIME DIFFERENCETI ME D IF FE RE NC E
TIME DIFFERENCETI ME D IF FE RE NC E
SETSE T CANCELCA NC EL
:
1
01 02
SET-UP
✽ How to use the SET-UP menu (➡P.90)
Continued