Digital Camera Owner's Manual
Table Of Contents
- For Your Safety
- About This Manual
- Camera Q & A
- Table of Contents
- Before You Begin
- First Steps
- Basic Photography and Playback
- More on Photography
- More on Playback
- Movies
- Connections
- Menus
- Technical Notes
- Troubleshooting
- Appendix
90
Using the Menus: Shooting Mode
1
Select ON for g EXTERNAL FLASH.
SET
SHOOTING MENU
3 4
EXTERNAL FLASH
OFF
OFF
3
1
0
OFF
M
3
1
NORMAL
NORMAL
0
1000fps
1000fps
ON
OFF
2
Lower the built-in ash and mount the option-
al ash unit on the camera hot shoe. Tighten
the locking screw.
3
Rotate the mode dial to P, S, A, M, or C.
4
Adjust ash settings as described in the man-
ual provided with the optional ash unit. TTL
mode is not supported; choose external ash
sync mode and set sensitivity (pg. 48) and ap-
erture to the values selected with the camera.
■
■
Using an Optional Flash Unit
Using an Optional Flash Unit