Operation Manual

22
BASIC OPERATION GUIDE
LCD monitor brightness / Volume adjustment
Holding down the “SHIFT” button and pressing
the “DISP” button displays the menu.Press “a”
or “b” to select an option and press “d” or
“c ” to change the setting. Then press the
“MENU/OK” button to confirm the setting.
Note that the volume can only be adjusted in
Playback mode.
Self-timer
Hold down the “SHIFT” button and press the
“AE-L” button to change between 2 sec., 10
sec. and OFF as the self-timer setting.
Photometry / White balance
Holding down the “SHIFT” button and pressing
a button changes the setting on the Command
dial. Release the button to confirm the setting.
Refer to the page listed in the table below for
details of the respective settings.
Self-timer
Photometry
White balance
P. 58
P. 62
P. 59
Hold down the “SHIFT” button
for 1 second or longer
0SHIFT button
Holding down the “SHIFT” button for 1 second or longer displays the “SHIFT CONTROL” guide.
By pressing one of the displayed button combinations, you can quickly and easily access the corresponding
setting.
The functions you can access vary depending on the current mode. The example below shows the
procedure for Photography mode.
ＥＶＦＥＶＦ／ＬＣＤＬＣＤ
ＳＥＬＳＥＬＦ-ＴＩＭＥＲＥＲ
ＷＢ
ＰＨＯＴ
ＯＴＯＭＯＭＥＴＲＹＥＴＲＹ
ＳＨＩＦＴ ＣＯＮＴＲＯＬＳＨＩＦＴ ＣＯＮＴＲＯＬ
＋
＋
＋
ＳＨＩＦＴＳＨＩＦＴ
ＤＩＳＰＤＩＳＰ
ＡＥ−ＬＡＥ−Ｌ
ＰＰ
２５０２５０ Ｆ５．６
３３３３
ＩＳＯＩＳＯ ２００ ２００
ＰＰ
２５０２５０ Ｆ５．６
３３３３
ＩＳＯＩＳＯ ２００ ２００
ＡＵＴＯＡＵＴＯ
ＩＳＯＩＳＯ ２００ ２００
２５０２５０ Ｆ５．６
３３３３
Ｐ
ＢＲＩＧＨＴＮＥＳＳＢＲＩＧＨＴＮＥＳＳ
＋−
ＳＥＴＳＥＴ ＣＡＮＣＥＬＣＡＮＣＥＬ ＯＫＯＫ BACKBACK
OFF
（No icon）