Operation Manual

45
Advanced Features
3
44
ＡＬＬＡＬＬ ＦＲＡＭＥＳＦＲＡＭＥＳ
ＥＲＡＳＥ ＡＬＬＥＲＡＳＥ ＡＬＬ ＯＫ？ ＯＫ？
ＩＴ ＭＡＹＩＴ ＭＡＹ
ＴＡＫＥ Ａ ＷＨＩＬＥＴＡＫＥ Ａ ＷＨＩＬＥ
１００−０００１１００−０００１
ＹＥＳＹＥＳ
ＣＡＮＣＥＬＣＡＮＣＥＬ
ＦＲＡＭＥＦＲＡＭＥ
ＥＲＡＳＥＥＲＡＳＥ ＯＫ？ ＯＫ？
１００−０００１１００−０００１
ＹＥＳＹＥＳ
ＣＡＮＣＥＬＣＡＮＣＥＬ
1Press “d” or “c” to select the frame (file) to be
erased.
2Press the “MENU/OK” button to erase the
currently displayed frame (file).
To erase another frame (file), repeat steps 1 and 2.
When you have finished erasing frames (files),
press the “DISP/BACK” button.
●
! Pressing the “MENU/OK” button repeatedly erases
consecutive frames (files). Take care not to erase a frame
(file) by mistake.
●
! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.49).
FRAME
Pressing the “MENU/OK” button erases all the
frames (files).
ALL FRAMES
●
! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.49).
01 02
o ERASING SINGLE / ALL FRAMES
PLAYBACK MENU
If “e ” or “r ” appears, press the “MENU/OK”
button again to erase the frames (files).
◆
To stop the procedure midway
◆
Press the “DISP/BACK” button to cancel erasing of
all the frames (files). Some unprotected frames (files)
will be left unerased.
●
! Even if you stop the procedure immediately, some frames
(files) will be erased.
ＡＬＬ ＦＲＡＭＥＳＡＬＬ ＦＲＡＭＥＳＡＬＬ ＦＲＡＭＥＳＡＬＬ ＦＲＡＭＥＳＡＬＬ ＦＲＡＭＥＳ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
u DPOF SET FRAME
PLAYBACK MENU
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
an xD-Picture Card. The recorded specifications include information on which frames
are to be printed.
This section gives a detailed description of how to order your prints with the FinePix
S3100 / FinePix S3500.
On the FinePix S3100 / FinePix S3500, you can specify only one print per image in the
DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
e
r
(➡P.44)
When erasing the image, the DPOF setting for that image is deleted at the same time.
4 (➡P.46)
When inserting an xD-Picture Card that contains images specified for printing by
another camera, those print specifications are all reset and replaced by the new print
specifications.
i (➡P.90)
Up to 999 images can be specified on the same xD-Picture Card.
HOW TO SPECIFY PRINT OPTIONS
(
DPOF
)