Operation Manual

21
Basic Photography
2
LCD monitor brightness/Volume adjustment
Holding down the “SHIFT” button and pressing
the “DISP” button displays the menu.Use
“ ” to select an option and “ ” to change
the setting. Then press the “MENU/OK” button
to confirm the setting.
Note that the volume can only be adjusted in
Playback mode.
Number of recorded pixels
Holding down the “SHIFT” button and pressing
the “MENU/OK” button displays the menu. Use
the “ ” button to select a setting and
the “MENU/OK” button to confirm the setting.
Self-timer
Hold down the “SHIFT” button and press the
“AE-L” button to switch between 2 sec., 10
sec. and OFF as the self-timer setting.
ISO Sensitivity, photometry and white
balance
Holding down the “SHIFT” button and pressing
a button changes the setting on the command
dial. Release the button to confirm the setting.
Refer to the page listed in the table below for details
of the respective settings.
Number of recorded pixels
Self-timer
ISO Sensitivity
Photometry
White balance
P.69
P.50
P.51
P.54
P.52
Hold down the “SHIFT” button
for1 second or longer
DISPDISPDISPDISP
ＬＣＤ ＢＲＩＧＨＴＮＥＳＳＬＣＤ ＢＲＩＧＨＴＮＥＳＳ
ＱＵＡＬＩＴＹＱＵＡＬＩＴＹ
ＷＨＩＴＥ ＢＡＬＡＮＣＥＷＨＩＴＥ ＢＡＬＡＮＣＥ
ＰＨＯＴＯＭＥＴＲＹＰＨＯＴＯＭＥＴＲＹ
ＩＳＯＩＳＯ
ＳＨＩＦＴ ＣＯＮＴＲＯＬＳＨＩＦＴ ＣＯＮＴＲＯＬ
＋
＋
＋
ＳＥＬＦＳＥＬＦ-ＴＩＭＥＲＴＩＭＥＲ
＋
００４９００４９
Ｎ
Ｆ５．６Ｆ５．６
２５０２５０
ＡＵＴＯＡＵＴＯ
Ｆ５．６Ｆ５．６
２５０２５０
００４９００４９
Ｎ
ＳＰＯＴＳＰＯＴ
ＭＵＬＴＩＭＵＬＴＩ ＡＶＥＲＡＧＥＡＶＥＲＡＧＥ
Ｆ５．６Ｆ５．６
２５０２５０
４００４００２００２００ ８００８００
Ｎ００４９００４９
ＮＯＲＭＡＬＮＯＲＭＡＬ
Ｎ
ＱＵＡＬＩＴＹＱＵＡＬＩＴＹ
Ｆ
ＯＫ
ＢＡＣＫ
Ｆ５．６Ｆ５．６
００４９００４９
２５０２５０
Ｎ
ＢＲＩＧＨＴＮＥＳＳＢＲＩＧＨＴＮＥＳＳ
ＯＫ
ＢＡＣＫ
●SHIFT button
Holding down the “SHIFT” button for 1 second or longer displays the “SHIFT CONTROL” guide.
By pressing one of the displayed button combinations, you can quickly and easily access
the corresponding setting.
The functions you can access vary depending on the current mode. The example
below shows the procedure for photography mode.
OFF
(Blank)