- Fujifilm DIGITAL CAMERA FinePix Z2 OWNER'S MANUAL

41
Advanced Features
3
1Set the Mode switch to “q”.
2Press the “p” button to display the menu on the
LCD monitor.
!
When “À” NATURAL LIGHT has been selected in “ˇ
SHOOTING MODE, “
û” (sensitivity) setting cannot be
selected.
!
In “r” Movie mode, do not set the “û” (sensitivity) setting.
1Press “a” or “b” to select “û” (sensitivity).
2Press “c”.
3
4
When the sensitivity is set to “64”, “100”, “200”,
“400”, “800” or “1600”, the selected sensitivity
setting appears on the LCD monitor.
01 02
Sensitivity is retained even when the mode setting
is changed.
1Press “a” or “b” to change the setting.
2Press the “MENU/OK” button to confirm the
setting.
h Settings
AUTO /64/100/200/400/800/1600
!
Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Streaking may also be
visible in shots of scenes such as the night sky.
Choose the sensitivity setting that best suits the conditions.
When selecting AUTO as the sensitivity setting, the
camera selects the best sensitivity setting for the
subject’s brightness.
1
2
01 02
01 02
û SENSITIVITY
p PHOTO MODE PHOTOGRAPHY
40
Area shot and quality setting
Normal shooting provides an
aspect ratio of 4:3 and “
shooting provides an aspect ratio
of 3:2 (same aspect ratio as
35 mm film and post card).
Area shot with “
12121212
Area shot excluding “
(2736 × 1824)
Printing at up to 4R (10.2 × 15.2 cm) / A6 size
2
(1600 × 1200)
To use for e-mail or web site
`
(640 × 480)
Printing at up to 6R (15.2 × 20.3 cm) / A5 size
3
(2048 × 1536)
Quality mode
÷
N (2592 × 1944)
Printing at up to 10R (25.4 × 30.5 cm) / A4 size
For better quality, select “
÷ F”
÷
F (2592 × 1944)
Sample uses
Quality setting in Photography mode
˘ QUALITY MODE
(
NUMBER OF RECORDED PIXELS
)
p PHOTO MODE PHOTOGRAPHY
Choose from 6 settings. Using the table below as a guide, select the setting that best suits your
aims.
!
Only if the sensitivity setting is set to “800” or “1600” and the
camera is turned off, the setting is not retained. When turning
the camera on again, the setting has been set to AUTO.
Select “800” or “1600” before taking pictures with “800” or
“1600” sensitivity setting.
See P.39 for information on how to select the quality setting.