Owner’s Manual BL00004880-204 EN
Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information For the latest information on this product, including the latest versions of the manuals and sample color photographs, visit: http://fujifilm-dsc.com/manuals/ The site can be accessed not only from your computer but also from smartphones and tablets.
P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 23 3 Basic Photography and Playback 39 4 Movie Recording and Playback 45 5 Taking Photographs 51 6 The Shooting Menus 85 7 Playback and the Playback Menu 119 8 The Setup Menus 145 9 Shortcuts 175 10 Peripherals and Optional Accessories 187 11 Connections 207 12 Technical Notes 217 iii
Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 85 for details.
Menu List P F FLASH SETTING 104 105 105 106 106 107 108 109 109 110 112 FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING B MOVIE SETTING MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY HDMI REC CONTROL MIC LEVEL ADJUSTMENT P 113 113 114 114 115 115 P 116 116 117 117 117 The Playback Menu Adjust playback settings. N See page 126 for details.
Setup Menus Adjust basic camera settings. N See page 145 for details. Menu List D USER SETTING FORMAT DATE/TIME TIME DIFFERENCE a MY MENU SETTING SENSOR CLEANING BATTERY AGE RESET D SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. HEADPHONES VOLUME SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME vi P D SCREEN SETTING P 146 EVF BRIGHTNESS 153 147 EVF COLOR 153 147 LCD BRIGHTNESS 153 148 1⁄2 LCD COLOR 153 148 IMAGE DISP. 154 149 AUTOROTATE DISPLAYS 154 149 PREVIEW EXP.
Menu List P D SAVE DATA SETTING P FRAME NO.
P Table of Contents Introduction ........................................................................................................... ii For the Latest Information............................................................................................ ii Menu List................................................................................................................ iv Shooting Menus ..........................................................................................................
Table of Contents 2 First Steps 3 Basic Photography and Playback 39 Taking Photographs (Mode P) .......................................................................40 a Viewing Pictures...........................................................................................43 b Deleting Pictures ...........................................................................................44 4 Movie Recording and Playback 45 F Recording Movies ..........................................................
N Sensitivity .......................................................................................................74 Auto Sensitivity (A) .........................................................................................................75 C Metering .........................................................................................................76 d Exposure Compensation...........................................................................77 Focus/Exposure Lock .......................
Table of Contents xi 1 Introduction G AF/MF SETTING .............................................................................................97 FOCUS AREA ......................................................................................................................97 AF MODE ..............................................................................................................................97 STORE AF MODE BY ORIENTATION ...............................................................
B MOVIE SETTING .......................................................................................... 116 MOVIE MODE.................................................................................................................. 116 MOVIE AF MODE .......................................................................................................... 116 HDMI OUTPUT INFO DISPLAY............................................................................... 117 HDMI REC CONTROL.......................
Table of Contents xiii 1 Introduction MY MENU SETTING ..................................................................................................... 148 SENSOR CLEANING ..................................................................................................... 149 BATTERY AGE .................................................................................................................. 149 RESET ..........................................................................................
EXPO. COMP. BUTTON SETTING .......................................................................... 166 TOUCH SCREEN SETTING ........................................................................................ 166 LOCK..................................................................................................................................... 166 D POWER MANAGEMENT ............................................................................ 167 AUTO POWER OFF ...................................
Table of Contents 10 Peripherals and Optional Accessories 11 Connections 207 HDMI Output .................................................................................................... 208 Connecting to HDMI Devices .............................................................................. 208 Shooting ............................................................................................................................ 209 Playback ..........................................................
Table of Contents 12 Technical Notes 217 Accessories from FUJIFILM .......................................................................... 218 For Your Safety ................................................................................................. 221 Product Care ..................................................................................................... 230 Cleaning the Image Sensor ......................................................................... 231 Firmware Updates.......
Supplied Accessories N The plug adapter supplied with the camera varies with the country or region of purchase; be sure to use the adapter appropriate to your country or region as described in the enclosed notice. The viewfinder can be removed, but the text that follows assumes that it is attached.
About This Manual This manual contains instructions for your FUJIFILM GFX 50S digital camera. Be sure you have read and understood its contents before proceeding. 1 Introduction Symbols and Conventions The following symbols are used in this manual: O Information that should be read to prevent damage to the product. Additional information that may be helpful when using the N product. P Pages on which related information may be found. Menus and other text in the displays are shown in bold.
Before You Begin 1
Parts of the Camera 1 Before You Begin A Secondary LCD monitor................................ 21 B Drive button ........................................................7 C Secondary monitor backlight button....... 21 D Dial lock release .................................................5 E Shutter speed dial .......................................................5, 52, 54, 58, 60 N Remote release connector cover ................ 57 O Sync terminal .................................................
Parts of the Camera 1 Before You Begin Z LCD monitor..............................................9, 14, 16 j Memory card slot cover latch...................... 32 Touch screen ...........................70, 103, 125, 166 k MENU/OK button .........................................5, 22 a Fn5 button ......................................................180 l Selector buttons ....................................... 5, 164 b Focus stick (focus lever)....................
1 Before You Begin t HDMI Micro connector (Type D) ..............208 u Remote release connector (⌀ 2.5 mm) ..... 57 v 15 V DC-IN connector .................................... 29 w Micro USB (Micro-B) USB 3.0/ USB 2.0 connector..................................57, 213 x Microphone jack (⌀ 3.5 mm) .............47, 117 y Headphone jack ............................................152 z Battery chamber ............................................. 30 0 Battery latch...........................................
Parts of the Camera The Selector Press the selector up (e), right (h), down (f), or left (g) to highlight items. The up, right, down, and left buttons also double as function buttons Fn6 through Fn9 (P 180). The Focus Stick Tilt or press the focus stick to select the focus area. The Shutter Speed and Sensitivity Dials Press the dial lock release to release the dial before rotating it to the desired setting. Press the release again to lock the dial in place.
The Command Dials Rotate or press the command dials to: Front command dial Rear command dial 1 Before You Begin • Choose the desired combination • Choose the desired combinaRotate Press 6 tion of shutter speed and aperture (program shift) • Adjust aperture • Adjust sensitivity when is C selected with the sensitivity dial • View other pictures during playback • Select menu tabs or page through menus Switch back and forth between aperture and sensitivity when C is selected with sensitivity dial.
Parts of the Camera The Drive Button Pressing the drive button displays the following drive mode options.
The Indicator Lamp When the viewfinder is not in use, camera status is shown by the indicator lamp. 1 Before You Begin Indicator lamp Glows green Blinks green Blinks green and orange Glows orange Blinks orange Blinks red Camera status Focus locked. Focus or slow shutter speed warning. Pictures can be taken. Recording pictures. Additional pictures can be taken. Recording pictures. No additional pictures can be taken at this time. Flash charging; flash will not fire when picture is taken.
Parts of the Camera The LCD Monitor The LCD monitor can be tilted for easier viewing, but be careful not to touch the wires or trap fingers or other objects behind the monitor. Touching the wires could cause camera malfunction. 1 Before You Begin N The LCD monitor also functions as a touch screen (P 70, 125). “Tall” (Portrait) Orientation When the camera is rotated to take pictures in “tall” (portrait) orientation, you can press the tilt lock release and tilt the display as shown.
The Viewfinder 1 Before You Begin A Hot shoe .................................................194, 200 B Viewfinder lock releases ................................ 11 C VIEW MODE button ......................................... 16 D Eye sensor.......................................................... 16 E Electronic viewfinder (EVF) ................... 12, 16 F Eye cup ............................................................... 11 G Diopter adjustment control ......................... 11 H Connectors...
The Viewfinder Attaching the Viewfinder Using the viewfinder makes it easier to frame your subject accurately. Remove the hot shoe cover from the camera and slide the viewfinder onto the hot shoe, stopping when it clicks into place. 1 Before You Begin Removing the Viewfinder Keeping the lock releases pressed (A), press down on the front of the viewfinder (B) and slide it off as shown. The Eye Cup To remove the eye cup, press the bottom in with both thumbs and slide eye cup up.
Camera Displays This section lists the indicators that may be displayed during shooting. O For illustrative purposes, displays are shown with all indicators lit. The Electronic Viewfinder 1 Before You Begin 1/ 1/ 2017 12:00 AM 5 4 3 2 1 0 -1 -2 -3 -4 -5 1.
Camera Displays * Shows “9999” if there is space for over 9999 frames. ) or manual focus (j) indicator may also be displayed. † In-focus ( Control Lock Pressing a locked control displays a X icon. Display Rotation When ON is selected for D SCREEN SETTING > AUTOROTATE DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation. 13 1 Before You Begin A IS mode ............................................................109 S Histogram .....................
The LCD Monitor 1/ 1/ 2017 12:00 AM 1 Before You Begin GRIP 14
Camera Displays T Battery level ...................................................... 36 U Sensitivity .......................................................... 74 V Exposure compensation ............................... 77 W Aperture................................................53, 58, 60 X Shutter speed ......................................53, 54, 60 Y AE lock.......................................................79, 165 TTL lock ......................................... 114, 163, 183 Z Metering ...
1 Before You Begin Choosing a Display Mode Press the VIEW MODE button to cycle through the following display modes: • E EYE SENSOR: Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. • EVF ONLY: Viewfinder on, LCD monitor off. • LCD ONLY: LCD monitor on, viewfinder off. • EVF ONLY + E: Putting your eye to the viewfinder turns the viewfinder on; taking it away turns the viewfinder off.
Camera Displays The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor. 1 Full screen Full screen (no indicators) Dual display (manual focus mode only; P 18) Standard indicators Before You Begin Viewfinder 1.
LCD Monitor Standard indicators No indicators Dual display (manual focus mode only) Info display 1 Before You Begin The Dual Display The dual display consists of a large full-frame window and a smaller closeup of the focus area.
Camera Displays Customizing Standard Indicators To choose the items shown in the standard indicator display: Display standard indicators. Press the DISP/BACK button until standard indicators are displayed. 2 Select DISP. CUSTOM SETTING. Select D SCREEN SETTING > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect.
1 Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. For a 3D display, press the function button to which ELECTRONIC LEVEL is assigned (P 162, 182) Pitch Roll Before You Begin Framing Outline Enable FRAMING OUTLINE to make the borders of the frame easier to see against dark backgrounds.
Camera Displays At default settings, the secondary LCD shows the following: • Text: A SHUTTER SPEED, B APERTURE, C EXPO. COMP., D ISO • Icons:* E FILM SIMULATION, F WHITE BALANCE, G IMAGE SIZE , H SHOOTING MODE The following options are also available: • Text: MOVIE MODE (icon only) , FRAMES REM. , REC.
Using the Menus To display the menus, press MENU/OK. Shooting Playback PLAY BACK MENU IMAGE QUALITY SETTING SWITCH SLOT RAW CONVERSION IMAGE SIZE IMAGE QUALITY 1 FILM SIMULATION ERASE CROP GRAIN EFFECT COLOR CHROME EFFECT RESIZE PROTECT Before You Begin DYNAMIC RANGE WHITE BALANCE IMAGE ROTATE RED EYE REMOVAL RAW RECORDING EXIT EXIT To navigate the menus: 1 Press MENU/OK to display the menus.
First Steps 23
Attaching the Shoulder Strap Attach the strap clips to the shoulder strap and then attach the strap to the camera. 1 Attach a clip to the strap. Slide a clip onto the strap (A) and pass the strap through the strap adjuster and strap retainer (B). 2 Attach the clip to the camera. Pull the strap upwards (A) until the clip clicks securely into place (B) in the ✔ (“correct”) position. If the clip is in the I (“incorrect”) position, press the tongue (C) until it clicks into place in the ✔ position.
Attaching the Shoulder Strap Locking the Clips Be sure to insert the clip locks after confirming that clips are correctly attached (P 24). To prevent the strap becoming detached accidentally, insert the clip locks as shown. O The clips are small and easily swallowed; keep out of reach of children. Be sure that the clips are correctly attached before inserting the locks (P 24). Failure to observe this precaution could damage the clips.
Attaching a Lens The camera can be used with lenses for the FUJIFILM G-mount. 2 Remove the body cap from the camera and the rear cap from the lens. Place the lens on mount, keeping the marks on the lens and camera aligned, and then rotate the lens until it clicks into place. First Steps O Be careful not to touch the camera’s internal parts. Do not press the lens release button while attaching the lens and be sure the latch has securely clicked into place.
Charging the Battery The battery is not charged at shipment. Before proceeding, use the supplied battery charger to fully charge the battery. O An NP-T125 rechargeable battery is supplied with the camera. Charging takes about 140 minutes. 1 Connect the plug adapter. The plug adapter supplied with the camera varies with the country or region of purchase; use the adapter appropriate to your country or region as described in the enclosed notice. Place the battery in the charger.
The Charging Indicator The charging indicator shows battery charge status as follows: Battery status Action Charging indicator Battery not inserted. Insert the battery. Off Battery fully charged. Remove the battery. On Battery charging. — Unplug the charger and Blinks Battery fault. remove the battery. 2 O Use the charger with the plug adapter for your country or region. First Steps Do not affix labels or other objects to the battery.
Charging the Battery Charging via AC Adapter The battery inserted in the camera will also charge when the camera is powered by an optional AC-15V AC adapter. Charging takes about 120 minutes. 29 2 First Steps Battery charge status is shown by battery status icons when the camera is on (playback mode) and by the indicator lamp when the camera is off.
Inserting the Battery After charging the battery, insert the battery in the camera as described below. 1 Open the battery-chamber cover. Slide the battery-chamber latch as shown and open the battery-chamber cover. O Do not remove the battery when the 2 First Steps camera is on. Failure to observe this precaution could damage image files or memory cards. Do not use excessive force when handling the battery-chamber cover. 2 Insert the battery.
Inserting the Battery 3 Close the battery-chamber cover. Close and latch the cover. O If the cover does not close, check that the battery is in the correct orientation. Do not attempt to force the cover shut. Removing the Battery Before removing the battery, turn the camera off and open the battery-chamber cover. First Steps To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown.
Inserting Memory Cards Pictures are stored on memory cards (sold separately). N The camera can be used with two cards, one in each of its two slots. 1 Open the memory card slot cover. Unlatch and open the cover. O Do not remove memory cards when the camera is on. Failure to observe this precaution could damage image files or memory cards. 2 First Steps 2 Insert the memory card. Holding the card in the orientation shown, slide it in until it clicks into place at the back of the slot.
Inserting Memory Cards Removing Memory Cards Before removing memory cards, turn the camera off and open the memory card slot cover. Press and release the card to eject it part way (to prevent the card falling from the slot, press the center of the card and release it slowly, without removing your finger from the card). The card can then be removed by hand. 2 Option SEQUENTIAL (default) Description The card in the second slot is used only when the card in the first slot is full.
Inserting Memory Cards 2 Compatible Memory Cards FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera; UHS-II cards can be used in both slots, while cards with a UHS speed class of 1 or better are recommended for movies. A complete list of approved memory cards is available at http://www.fujifilm.com/support/ digital_cameras/compatibility/. Operation is not guaranteed with other cards.
Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Rotate the switch to ON to turn the camera on, or to OFF to turn the camera off. O Fingerprints and other marks on the lens or viewfinder can affect picN Press the a button to start playback. Press the shutter button halfway to return to shooting mode. The camera will turn off automatically if no operations are performed for the length of time selected for D POWER MANAGEMENT > AUTO POWER OFF.
Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: 2 First Steps Indicator e f g h i i (red) j (blinks red) 36 Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full. Low battery. Charge as soon as possible. Battery exhausted. Turn camera off and recharge battery.
Basic Setup A language-selection dialog is displayed the first time the camera is turned on. 1 Turn the camera on. A language-selection dialog will be displayed. 2 First Steps 2 Choose a language. Highlight a language and press MENU/OK. 3 Set the date and time. DATE/TIME NOT SET Press the selector left or right to highlight the year, month, day, hour, 2015 2016 or minute and press up or down YY.MM.DD 2017 . 1 . 1 12 ： 00 AM 2018 to change.
Basic Setup N If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on. Skipping the Current Step Press DISP/BACK to skip the current step. Any steps you skip will be displayed the next time the camera is turned on. 2 Choosing a Different Language To change the language: First Steps 1 Display language options. Select D USER SETTING > a. 2 Choose a language.
Basic Photography and Playback 39
Taking Photographs (Mode P) This section describes how to take pictures using program AE (mode P). See pages 52–61 for information on S, A, and M modes. 1 Adjust settings for program AE. A C B D 3 Basic Photography and Playback A Aperture (P 52): Select A (auto). B Sensitivity (P 74): Select A (auto). C Shutter speed (P 52): Select A (auto). D Focus mode (P 63): Select S (single AF).
Taking Photographs (Mode P) 3 Ready the camera. Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands can blur your shots. To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens. Basic Photography and Playback 4 3 Frame the picture. Lenses with Zoom Rings Use the zoom ring to frame the picture in the display. Rotate the ring left to zoom out, right to zoom in.
Taking Photographs (Mode P) 5 Focus. Press the shutter button halfway to focus. Focus indicator Focus frame If the camera is able to focus, it will beep twice and focus area and focus indicator will glow green. Focus and exposure will lock while the shutter button is pressed halfway. 3 Basic Photography and Playback If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the focus indicator will blink white. 6 42 Shoot.
a Viewing Pictures Pictures can be viewed in the viewfinder or LCD monitor. To view pictures full frame, press a. 100-0001 N Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display correctly and that playback zoom may not be available. Two Memory Cards If two memory cards are inserted, you can press and hold the a button to choose a card for playback. You can also select a card using the C PLAY BACK MENU > SWITCH SLOT option.
b Deleting Pictures Use the b button to delete pictures. O Deleted pictures can not be recovered. Copy important pictures to a computer or other storage device before proceeding. 1 With a picture displayed full frame, press the b button and select FRAME. ERASE FRAME SELECTED FRAMES ALL FRAMES 3 Basic Photography and Playback 2 Press the selector left or right to scroll through pictures and press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures.
Movie Recording and Playback 45
F Recording Movies This section describes how to film movies in auto mode. 1 2 Press the drive mode button and select F MOVIE. Adjust settings for program AE. A C B D 4 Movie Recording and Playback A Aperture (P 52): Select A (auto). B Sensitivity (P 74): Select A (auto). C Shutter speed (P 52): Select A (auto). D Focus mode (P 63): Select S (single AF). N To use the shutter speed and sensitivity dials, press the dial lock release and rotate the dial to the desired setting.
Recording Movies 4 Press the button again to end recording. Recording ends automatically when the maximum length is reached or the memory card is full. O Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. Note that the microphone may pick up lens noise and other sounds made by the camera during recording. Vertical or horizontal streaks may appear in movies containing very bright subjects.
Recording Movies Adjusting Movie Settings Frame size and rate can be selected using B MOVIE SETTING > MOVIE MODE, while the card used to store movies can be selected using D SAVE DATA SETTING > MOVIE FILE DESTINATION. Focus mode is selected using the focus mode selector; for continuous focus adjustment, select C, or choose S and enable Intelligent Face Detection. Intelligent Face Detection is not available in focus mode M. Depth of Field Choose low f-numbers to soften background details.
a Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. 1/1/2017 12:00 AM PLAY ±0 The following operations can be performed while a movie is displayed: 4 Playback in progress ((x x) e f gh Pause playback Adjust speed Playback paused (y (y) End playback Start/resume playback Single frame rewind/advance Progress is shown in the display during playback. 29m59s O Do not cover the speaker during playback.
Viewing Movies Playback Speed Press the selector left or right to adjust playback speed during playback. Speed is shown by the number of arrows (M or N).
Taking Photographs 51
P, S, A, and M Modes P, S, A, and M modes give you varying degrees of control over shutter speed and aperture. Mode P: Program AE Let the camera choose shutter speed and aperture for optimal exposure. Other values that produce the same exposure can be selected with program shift. Shutter speed: Select A (auto). 5 Aperture: Select A (auto). Taking Photographs Set shutter speed and aperture to A (auto) and confirm that P appears in the display.
P, S, A, and M Modes Program Shift If desired, you can rotate the rear command dial to select other combinations of shutter speed and aperture without altering exposure (program shift). Shutter speed Aperture O Program shift is not available during movie recording or if the flash supports TTL auto or an auto option is selected for H IMAGE QUALITY SETTING > DYNAMIC RANGE. N To cancel program shift, turn the camera off.
Mode S: Shutter-Priority AE Choose a shutter speed and let the camera adjust aperture for optimal exposure. Shutter speed: Choose a speed. Aperture: Select A (auto). Set aperture to A (auto) and use the shutter speed dial to choose a shutter speed. S will appear in the display. 5 Taking Photographs O If the correct exposure can not be achieved at the selected shutter speed, aperture will be displayed in red.
P, S, A, and M Modes Time (T) Rotate the shutter speed dial to T (time) to choose slow shutter speeds for long time-exposures. Use of a tripod is recommended to prevent the camera moving during the exposure. 1 Rotate the shutter speed dial to T. 2 Rotate the rear command dial to choose a shutter speed. 5 Press the shutter button all the way down to take a picture at the selected shutter speed. A count-down timer will be displayed while the exposure is in progress.
Bulb (B) Select a shutter speed of B (bulb) for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the exposure. 5 1 Rotate the shutter speed dial to B. 2 Press the shutter button all the way down. The shutter will remain open for up to 60 minutes while the shutter button is pressed; the display shows the time elapsed since the exposure started.
P, S, A, and M Modes Using a Remote Release An optional RR-90 remote release can be used for long time-exposures. The RR-90 connects via the Micro USB (Micro-B) USB 2.0 connector. Alternatively, electronic releases from third-party suppliers can be connected via the remote release connector (⌀2.
Mode A: Aperture-Priority AE Choose an aperture and let the camera adjust shutter speed for optimal exposure. Shutter speed: Select A (auto). Aperture: Choose an aperture. Rotate the shutter speed dial to A (auto), and rotate the lens aperture ring to adjust aperture as desired. A will appear in the display. 5 Taking Photographs O If the correct exposure can not be achieved at the selected aperture, shutter speed will be displayed in red.
P, S, A, and M Modes Previewing Depth of Field When PREVIEW DEPTH OF FIELD is assigned to a function button, pressing the button displays a L icon and stops aperture down to the selected setting, allowing depth of field to be previewed in the display. N Depth of field can also be previewed using the depth-of-field indicator in the standard display. Press DISP/BACK to cycle through display modes until standard indicators are displayed.
Mode M: Manual Exposure Alter exposure from that selected by the camera. Shutter speed: Choose a speed. Aperture: Choose an aperture. Set shutter speed to a value other than A, and rotate the lens aperture ring to choose the aperture. M will appear in the display. 5 N To use the shutter speed dial, press the dial lock release and rotate the Taking Photographs dial to the desired setting. Shutter speed can be adjusted in increments of 1⁄3 EV by rotating the rear command dial.
P, S, A, and M Modes Exposure Preview To preview exposure in the LCD monitor, select an option other than OFF for D SCREEN SETTING > PREVIEW EXP./WB IN MANUAL MODE. Select OFF when using the flash or on other occasions on which exposure may change when the picture is taken.
Autofocus Take pictures using autofocus. 1 Rotate the focus mode selector to S or C (P 63). 2 Use G AF/MF SETTING > AF MODE to choose an AF mode (P 65). 3 Choose the position and size of the focus frame (P 67). 4 Take pictures. 5 Taking Photographs N For information on the autofocus system, visit: http://fujifilm-x.com/af/en/index.
Autofocus Focus Mode Use the focus mode selector to choose how the camera focuses. Choose from the following options: Mode S (AF-S) C (AF-C) M (manual) Description Single AF: Focus locks while the shutter button is pressed halfway. Choose for stationary subjects. Continuous AF: Focus is continually adjusted to reflect changes in the distance to the subject while the shutter button is pressed halfway. Use for subjects that are in motion. Eye-detection AF is not available.
The Focus Indicator The focus indicator turns green when the subject is in focus and blinks white when the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing and are displayed continuously in mode C. j is displayed in manual focus mode.
Autofocus Autofocus Options (AF Mode) Choose how the camera focuses in modes S and C. 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > AF MODE. Choose an AF mode. N This feature can also be accessed via shortcuts (P 176). How the camera focuses depends on the focus mode. Focus Mode S (AF-S) Option Description Sample image Camera focuses on subject in selected focus point. Use for pinSINGLE POINT point focus on selected subject.
Focus Mode C (AF-C) Option Description Focus tracks subject at selected focus point. Use for subjects moving SINGLE POINT toward or away from camera. r y ZONE 5 Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably. Focus tracks subjects moving z WIDE/TRACKING through wide area of frame.
Autofocus Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > FOCUS AREA to view the focus-point display. Use the focus stick and rear command dial to choose a focus area. Selecting a Focus Point Use touch controls or the focus stick (focus lever) to choose the focus point and the rear command dial to choose the size of the focus frame.
The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT 5 AF mode y ZONE z WIDE/TRACKING Taking Photographs Number of points avail- Choose from zones with Position focus frame over able can be selected using 7 × 7, 5 × 5, or 3 × 3 focus subject and press MENU/OK. G AF/MF SETTING > points. NUMBER OF THE FOCUS POINTS.
Autofocus Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object. • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur. • Insubstantial subjects, such as smoke or flame. • Subjects that show little contrast with the background.
Touch Focus Controls Use the touch screen to focus when taking photographs. Tap the touch screen mode indicator in the shooting display to cycle through the following touch-screen modes: Mode AF Description Tap the display to select a focus point and lock focus. The shutter can be released by pressing the shutter button all the way down. AREA Tap the display to move the focus frame to the selected point. The selected point will be used for focus and focus zoom.
Manual Focus Adjust focus manually. 1 Rotate the focus mode selector to M. j will appear in the display. 32 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. 3 Take pictures. 5 N Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the direction of rotation of the focus ring. Regardless of the option selected, manual focus will be used when the lens is in manual focus mode.
Quick Focus To use autofocus to focus on the subject in the selected focus area, press the button to which focus lock or AF-ON has been assigned (the size of the focus area can be chosen with the rear command dial). In manual focus mode, you can use this feature to quickly focus on a chosen subject using either single or continuous AF according to the option chosen for G AF/ MF SETTING > INSTANT AF SETTING.
Manual Focus Checking Focus A variety of options are available for checking focus in manual focus mode. The Manual Focus Indicator Focus distance The manual focus indicator indicates (white line) how closely the focus distance matches the distance to the subject in the focus brackets.
N Sensitivity Adjust the camera’s sensitivity to light. Press the sensitivity dial lock release, rotate the dial to the desired setting, and press the release again to lock the dial in place. Option A (auto) C (command) 5 Taking Photographs 12800–100 Description Sensitivity is automatically adjusted in response to shooting conditions according to option chosen for A SHOOTING SETTING > ISO AUTO SETTING. Choose from AUTO 1, AUTO 2, and AUTO 3. Sensitivity can be set by rotating the front command dial.
Sensitivity Auto Sensitivity (A) Use A SHOOTING SETTING > ISO AUTO SETTING to choose the base sensitivity, maximum sensitivity, and minimum shutter speed for the A position on the sensitivity dial. Settings for AUTO 1, AUTO 2, and AUTO 3 can be stored separately; the defaults are shown below. Option DEFAULT SENSITIVITY MAX. SENSITIVITY MIN.
C Metering Choose how the camera meters exposure. A SHOOTING SETTING > PHOTOMETRY offers a choice of the following metering options: O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is OFF. Mode v (spot) p (centerweighted) o 5 (multi) Taking Photographs w (average) 76 Description The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total.
d Exposure Compensation Adjust exposure. Hold the d button and rotate the rear command dial until the desired value is displayed in the viewfinder or LCD monitor. O The amount of compensation available varies with the shooting mode. The d Button If ON/OFF SWITCH is selected for D BUTTON/DIAL SETTING > EXPO. COMP. BUTTON SETTING, exposure compensation can be set by pressing the d button once, rotating the rear command dial, and then pressing the d button again.
Focus/Exposure Lock Compose photographs with off-center subjects. 5 1 Focus: Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). 2 Recompose: Keep the shutter button pressed halfway. 3 Shoot: Press the button all the way down.
Focus/Exposure Lock The AF-L and AE-L Buttons Focus and exposure can also be locked using function buttons. At default settings, the Fn4 button locks focus, the Fn5 button exposure. Focus and/or exposure will remain locked while the button is pressed, whether or not the shutter button is pressed halfway.
BKT Bracketing Automatically vary settings over a series of pictures. Press the drive button and choose from the options below. O AE BKT Use A SHOOTING SETTING > AE BKT SETTING to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount.
Bracketing V WHITE BALANCE BKT Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.
I Continuous Shooting (Burst Mode) Capture motion in a series of pictures. Press the drive button and select I CONTINUOUS. The camera will take pictures while the shutter button is pressed; shooting ends when the shutter button is released or the memory card is full. O If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder. Burst shooting may not begin if the space available on the memory card is insufficient.
j Multiple Exposures Create a photograph that combines two exposures. 1 2 3 Press the drive button and select j MULTIPLE EXPOSURE. Take the first shot. Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. N To return to Step 2 and retake the first NEXT RETRY 4 5 EXIT Taking Photographs shot, press the selector left. To save the first shot and exit without creating a multiple exposure, press DISP/BACK.
MEMO 84
The Shooting Menus 85
H IMAGE QUALITY SETTING Adjust image quality settings. To display image quality settings, press MENU/OK in the shooting display and select the H (IMAGE QUALITY SETTING) tab. 画質設定 IMAGE QUALITY SETTING 画像サイズ IMAGE SIZE 画質モード IMAGE QUALITY RAW 記録方式 RAW RECORDING フィルムシミュレーション FILM SIMULATION グレイン･エフェクト GRAIN EFFECT ダイナミックレンジ COLOR CHROME EFFECT ホワイトバランス ハイライトトーン DYNAMIC RANGE WHITE BALANCE EXIT N The options available vary with the shooting mode selected.
IMAGE QUALITY SETTING IMAGE QUALITY Choose a file format and compression ratio. Select SUPER FINE (minimum compression), FINE (low compression), or NORMAL (high compression) to record JPEG images, RAW to record RAW images, or SUPER FINE+RAW, FINE+RAW, or NORMAL+RAW to record both JPEG and RAW images. With JPEG images, the lower the compression ratio, the higher the quality of the image, while higher compression ratios allow more images to be stored in the same amount of memory.
FILM SIMULATION Simulate the effects of different kinds of film, including blackand-white (with or without color filters). Choose a palette according to your subject and creative intent. Option 6 The Shooting Menus Description Standard color reproduction. Suited to a wide range of c PROVIA/STANDARD subjects, from portraits to landscapes. A high-contrast palette of saturated colors, suited to d Velvia/VIVID nature photos.
IMAGE QUALITY SETTING GRAIN EFFECT Add a film grain effect. Select an amount (STRONG or WEAK) or choose OFF to turn film grain off. Options WEAK STRONG OFF COLOR CHROME EFFECT Deepen colors in shadows. Select an amount (STRONG or WEAK) or choose OFF to turn the effect off. Options WEAK STRONG OFF O COLOR CHROME EFFECT is not available during bracketing or burst photography.
WHITE BALANCE For natural colors, choose a white balance option that matches the light source. Option AUTO k/l/m k i j k l m n g Description White balance is adjusted automatically. Measure a value for white balance. Choose a color temperature. For subjects in direct sunlight. For subjects in the shade. Use under “daylight” fluorescent lights. Use under “warm white” fluorescent lights. Use under “cool white” fluorescent lights. Use under incandescent lighting.
IMAGE QUALITY SETTING Fine-Tuning White Balance Pressing MENU/OK after selecting a white balance option displays the dialog shown at right; use the selector to fine-tune white balance or press DISP/BACK to exit without fine-tuning. WB SHIFT AUTO R:0 B:0 SET Custom White Balance Choose k, l, or m to adjust white CUSTOM WB balance for unusual lighting conditions.
k: Color Temperature Selecting k in the white balance menu displays a list of color temperatures; highlight a color temperature and press MENU/OK to select the highlighted option and display the fine-tuning dialog. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET SHIFT 10000K 9100K 8300K 7700K 7100K Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K).
IMAGE QUALITY SETTING HIGHLIGHT TONE Adjust the appearance of highlights. Choose from seven options between +4 and −2. +4 +3 +2 Options +1 0 −1 −2 SHADOW TONE Adjust the appearance of shadows. Choose from seven options between +4 and −2. +4 +3 +2 Options +1 0 −1 −2 COLOR Adjust color density. Choose from nine options between +4 and −4. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 6 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 93 The Shooting Menus SHARPNESS Sharpen or soften outlines.
NOISE REDUCTION Reduce noise in pictures taken at high sensitivities. Choose from nine options between +4 and −4. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 LONG EXPOSURE NR Select ON to reduce mottling in long time-exposures. Options ON OFF LENS MODULATION OPTIMIZER Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens. Options ON 6 OFF The Shooting Menus COLOR SPACE Choose the gamut of colors available for color reproduction.
IMAGE QUALITY SETTING PIXEL MAPPING Use this option if you notice bright spots in your pictures. 1 Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. 2 Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. Processing may take a few seconds. O Results are not guaranteed. Be sure the battery is fully charged before beginning pixel mapping. Pixel mapping is not available when the camera temperature is elevated.
IMAGE QUALITY SETTING EDIT/SAVE CUSTOM SETTING Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can be recalled using H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING. 1 Press MENU/OK in shooting mode to display the shooting menu. Select the H IMAGE QUALITY SETTING tab, then highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK. 2 Highlight a custom settings bank and press MENU/OK to select.
G AF/MF SETTING Adjust focus settings. To display focus settings, press MENU/OK in the shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA AF MODE STORE AF MODE BY ORIENTATION RAPID AF AF POINT DISPLAY NUMBER OF THE FOCUS POINTS PRE-AF FACE/EYE DETECTION SETTING EXIT N The options available vary with the shooting mode selected. FOCUS AREA Choose the focus area for autofocus, manual focus, and focus zoom. AF MODE Choose the AF mode for focus modes S and C.
STORE AF MODE BY ORIENTATION Choose whether the focus mode and focus area used when the camera is in portrait orientation are stored separately from those used when the camera is in landscape orientation. Option Description OFF The same settings are used in both orientations. FOCUS AREA ONLY The focus area for each orientation can be selected separately. ON The focus mode and focus area can be selected separately. RAPID AF Select ON for faster focus times.
AF/MF SETTING NUMBER OF THE FOCUS POINTS Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected for AF MODE. Option 117 POINTS (13 × 9) 425 POINTS (25 × 17) Description Choose from 117 focus points arranged in a 13- by 9-point grid. Choose from 425 focus points arranged in a 25- by 17-point grid. PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway.
FACE/EYE DETECTION SETTING Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits. Choose for shots that emphasize portrait subjects. Faces can be detected with the camera in vertical or horizontal orientation; if a face is detected, it will be indicated by a green border.
AF/MF SETTING AF+MF If ON is selected in focus mode S, focus can be adjusted manually by rotating the focus ring while the shutter button is pressed halfway. Both standard and focus peaking MF assist options are supported. Options ON OFF O Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator.
FOCUS CHECK If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode. Options ON OFF O Pressing the center of the rear command dial cancels focus zoom. INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE POINT is selected for AF MODE and SPOT is selected for PHOTOMETRY.
AF/MF SETTING DEPTH-OF-FIELD SCALE Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. Options PIXEL BASIS FILM FORMAT BASIS RELEASE/FOCUS PRIORITY Choose how the camera focuses in focus mode AF-S or AF-C.
A SHOOTING SETTING Adjust shooting options. To display shooting options, press MENU/OK in the shooting display and select the A (SHOOTING SETTING) tab. SHOOTING SETTING SELF-TIMER SAVE SELF-TIMER SETTING INTERVAL TIMER SHOOTING AE BKT SETTING FILM SIMULATION BKT PHOTOMETRY SHUTTER TYPE IS MODE EXIT N The options available vary with the shooting mode selected. SELF-TIMER Choose a shutter release delay.
SHOOTING SETTING SAVE SELF-TIMER SETTING If ON is selected, the chosen self-timer setting will remain in effect after a picture is taken or the camera is turned off. Options ON OFF INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. 1 Highlight INTERVAL TIMER SHOOTING in the A (SHOOTING SETTING) tab and press MENU/OK. 2 Use the selector to choose the interval and number of shots. Press MENU/OK to proceed.
O Interval timer photography can not be used at a shutter speed of B (bulb) or with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N Use of a tripod is recommended. Check the battery level before starting. We recommend using an optional AC-15V AC power adapter. The display turns off between shots and lights a few seconds before the next shot is taken. The display can be activated at any time by pressing the shutter button.
SHOOTING SETTING PHOTOMETRY Choose how the camera meters exposure. O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is OFF. Mode Description The camera instantly determines exposure based on an analo ysis of composition, color, and brightness distribution. RecMULTI ommended in most situations. The camera meters the entire frame but assigns the greatest p CENTER-WEIGHTED weight to the area at the center.
SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option Description t MECHANICAL SHUTTER Take pictures with the mechanical shutter. s ELECTRONIC SHUTTER Take pictures with the electronic shutter. Reduces the lag between the shutter button being Q E-FRONT CURTAIN pressed and the start of the exposure. The mechanical SHUTTER shutter is used at high shutter speeds (P 244).
SHOOTING SETTING IS MODE Reduce blur. Option l CONTINUOUS Description Image stabilization on. Image stabilization enabled only when the shutter button m SHOOTING ONLY is pressed halfway (focus mode C) or the shutter is released. Image stabilization off ; x appears in the display. RecOFF ommended when the camera is on a tripod. N This option is available only with lenses that support image stabilization.
MOUNT ADAPTOR SETTING Adjust settings for lenses attached via a mount adapter. Shutter Select When using lenses with an internal shutter, choose whether to use the shutter on the camera (BODY) or the lens (LENS). O This option may have no effect with some lenses. Saved Settings Store settings for up to 6 lenses, or choose OFF to disable corrections for focal length, distortion, color shading, and peripheral illumination. Choosing a Focal Length Use the selector to enter the focal length.
SHOOTING SETTING Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. To use color shading correction, follow the steps below. NEXT SET 1 Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle. 2 Use the selector to adjust shading until there is no visible difference in color between the selected corner and the center of the image.
SHOOTING SETTING WIRELESS COMMUNICATION Connect to smartphones running the “FUJIFILM Camera Remote” app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. N For downloads and other information, visit: http://fujifilm-dsc.
F FLASH SETTING Adjust flash-related settings. To display flash-related settings, press MENU/OK in the shooting display and select the F (FLASH SETTING) tab. N The options available vary with the shooting mode selected.
TTL-LOCK MODE Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs. Option Description Flash output is locked at the value metered for the most LOCK WITH LAST FLASH recent photo. An error message will be displayed if no previously metered value exists. LOCK WITH METERING The camera emits a series of pre-flashes and locks flash FLASH output at the metered value.
FLASH SETTING MASTER SETTING Choose a flash group (A, B, or C) for the flash mounted on the camera hot shoe when it functions as a master flash controlling remote flash units via FUJIFILM wireless optical flash control, or choose OFF to limit master flash output to a level that does not affect the final picture. Options Gr A Gr B Gr C OFF N This option can also be accessed via the flash settings menu.
B MOVIE SETTING Adjust movie-recording options. To display options for movie recording, press MENU/OK in the shooting display and select the B (MOVIE SETTING) tab. 画質設定 MOVIE SETTING 画像サイズ MOVIE MODE 画質モード MOVIE AF MODE RAW 記録方式 HDMI OUTPUT INFO DISPLAY フィルムシミュレーション HDMI REC CONTROL グレイン･エフェクト MIC LEVEL ADJUSTMENT ダイナミックレンジ ホワイトバランス ハイライトトーン 終了 EXIT N The options available vary with the shooting mode selected. MOVIE MODE Choose a frame size and rate for movie recording.
MOVIE SETTING HDMI OUTPUT INFO DISPLAY If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display. Options ON OFF HDMI REC CONTROL Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording. Options ON OFF MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in and external microphones.
MEMO 118
Playback and the Playback Menu 119
The Playback Display This section lists the indicators that may be displayed during playback. O For illustrative purposes, displays are shown with all indicators lit. 1.1. 2017 12:00 AM Playback and the Playback Menu 7 A Date and time.........................................37, 147 B Face detection indicator .............................100 C Red-eye removal indicator................113, 135 D Location data........................................173, 210 E Protected image ................................
The Playback Display The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Standard Information off 1.1.2017 12:00 AM Playback and the Playback Menu 1.1.2017 12:00 AM 1.1.2017.12:00 AM 7 FAVORITES Favorites Info display The Info Display In the info display, you can press the selector up to cycle through a series of information and histogram displays.
The Playback Display Viewing Photo Information The photo information display changes each time the selector is pressed up. Basic data Histogram 1.1.2017 12:00 AM Playback and the Playback Menu BACK 1.1.2017.12:00 AM S.S 1/1200 F 5.6 ISO 41200 +1 BACK 7 Info display 2 Info display 1 Zooming in on the Focus Point Press the center of the rear command dial to zoom in on the focus point. Press again to return to full-frame playback.
Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback.
Playback Zoom Rotate the rear command dial right to zoom in on the current picture, left to zoom out. To exit zoom, press DISP/BACK, MENU/OK, or the center of the rear command dial. N The maximum zoom ratio varies with the option selected for H IM- AGE QUALITY SETTING > IMAGE SIZE. Playback zoom is not available with cropped or resized copies saved at a size of a.
Viewing Pictures Playback Touch Controls When ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING, touch controls can be used for the following playback operations. • Swipe: Swipe a finger across the display to view other images. Playback and the Playback Menu • Pinch-out: Place two fingers on the display and spread them apart to zoom in. • Pinch-in: Place two fingers on the display and slide them together to zoom out.
C The Playback Menu Adjust playback settings. The playback menu is displayed when you press MENU/OK in playback mode. PLAY BACK MENU SWITCH SLOT RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVAL EXIT Playback and the Playback Menu SWITCH SLOT Choose the card from which images will be played back. N If two memory cards are inserted, you can press and hold the a button to choose a card for playback.
The Playback Menu RAW CONVERSION RAW pictures store information on camera settings separately from the data captured by the camera image sensor. Using C PLAY BACK MENU > RAW CONVERSION, you can create JPEG copies of RAW pictures using different options for the settings listed on page 128. The original image data are unaffected, allowing a single RAW image to be processed in a multitude of different ways. With a RAW picture displayed, press MENU/OK to display the playback menu.
The settings that can be adjusted when converting pictures from RAW to JPEG are: Setting Playback and the Playback Menu 7 Description Create a JPEG copy using the settings in effect at the REFLECT SHOOTING COND. time the photo was taken. FILE TYPE Choose a file format. IMAGE SIZE Choose an image size. IMAGE QUALITY Adjust image quality. PUSH/PULL PROCESSING Adjust exposure. DYNAMIC RANGE Enhance details in highlights for natural contrast. FILM SIMULATION Simulate the effects of different types of film.
The Playback Menu ERASE Delete individual pictures, multiple selected pictures, or all pictures. O Deleted pictures can not be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. Option FRAME SELECTED FRAMES ALL FRAMES Description Delete pictures one at a time. Delete multiple selected pictures. Delete all unprotected pictures.
ALL FRAMES 1 Select ALL FRAMES for ERASE in the playback menu. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures. N Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not be recovered. If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures.
The Playback Menu CROP Create a cropped copy of the current picture. 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Select CROP in the playback menu. Use the rear command dial to zoom in and out and press the selector up, down, left, or right to scroll the picture until the desired portion is displayed. N Larger crops produce larger copies; all copies have an aspect ratio of 3∶2. If the size of the final copy will be a, YES will be displayed in yellow.
RESIZE Create a small copy of the current picture. 1 2 3 Display the desired picture. 4 Press MENU/OK again to save the resized copy to a separate file. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confirmation dialog. Playback and the Playback Menu N The sizes available vary with the size of the original image.
The Playback Menu PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. • FRAME: Protect selected pictures. Press the selector left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. • SET ALL: Protect all pictures. • RESET ALL: Remove protection from all pictures. O Protected pictures will be deleted when the memory card is formatted.
IMAGE ROTATE Rotate pictures. Playback and the Playback Menu 1 2 3 Display the desired picture. 4 Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera. Select IMAGE ROTATE in the playback menu. Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. N Protected pictures can not be rotated. Remove protection before rotating pictures.
The Playback Menu RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. 1 2 3 Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK. N Results vary depending on the scene and the camera’s success in deThe amount of time needed to process the image varies with the number of faces detected. Red eye removal can not be performed on RAW images.
VOICE MEMO SETTING Add a voice memo to the current photograph. 1 2 3 Select ON for VOICE MEMO SETTING in the playback menu. Display a photo to which you wish to add a voice memo. Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial. N The new memo will be recorded over any existing memos. Deleting Playback and the Playback Menu the picture also deletes the memo. Voice memos can not be added to movies or protected pictures.
The Playback Menu COPY Copy pictures between the cards in the first and second slots. 1 2 Select COPY in the playback menu. 3 Highlight one of the following options and press MENU/OK: • FRAME: Copy selected pictures. Press the selector left or right to view pictures and press MENU/OK to copy the current picture. • ALL FRAMES: Copy all pictures.
WIRELESS COMMUNICATION Connect to smartphones running the “FUJIFILM Camera Remote” app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. N For downloads and other information, visit: http://fujifilm-dsc.
The Playback Menu PHOTOBOOK ASSIST Create books from your favorite photos. Creating a Photobook 1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. 2 Scroll through the images and press the selector up to select or deselect. Press MENU/OK to exit when the book is complete. N Neither photographs a or smaller nor movies can be selected The first picture selected becomes the cover image. Press the selector down to select the current image for the cover instead.
Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the selector left or right to scroll through the pictures. Playback and the Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the onscreen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book.
The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. 1 2 Select C PLAY BACK MENU > PRINT ORDER (DPOF). Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding. Display a picture you wish to include in or remove from the print order. 4 Press the selector up or down to choose the number of copies (up to 99).
instax PRINTER PRINT To print pictures to optional FUJIFILM instax SHARE printers, first select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password, then follow the steps below. 1 2 Turn the printer on. Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer.
The Playback Menu DISP ASPECT Choose how High Definition (HD) devices display pictures with an aspect ratio of 4∶3 (this option takes effect only when an HDMI cable is connected). Select 16∶9 to display the image so that it fills the screen with its top and bottom cropped out, 4∶3 to display the entire image with black bands at either side. 16:9 4: 3 Option Playback and the Playback Menu 16∶∶9 16 4∶3 Display N Select 16∶9 when viewing pictures with an aspect ratio of 16∶9.
MEMO 144
The Setup Menus 145
D USER SETTING Adjust basic camera settings. To access basic camera settings, press MENU/OK, select the D (SET UP) tab, and choose USER SETTING. USER SETTING FORMAT DATE/TIME TIME DIFFERENCE MY MENU SETTING SENSOR CLEANING BATTERY AGE RESET FORMAT To format a memory card: The Setup Menus 8 1 2 Select D USER SETTING > FORMAT in the D (SET UP) tab. 3 A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK.
USER SETTING DATE/TIME To set the camera clock: 1 2 Select D USER SETTING > DATE/TIME in the D (SET UP) tab. 3 Press MENU/OK to set the clock. Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down.
a Choose a language. MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used options. 1 2 Highlight D USER SETTING > MY MENU SETTING in the D (SET UP) tab and press MENU/OK to display the options at right. マイメニュー設定 The Setup Menus Press the selector up or down to highlight MY MENU SETTING and press MENU/OK. Options that can be added to “my menu” are highlighted in blue.
USER SETTING SENSOR CLEANING Remove dust from the camera image sensor. • OK: Clean the sensor immediately. • WHEN SWITCHED ON: Sensor cleaning will be performed when the camera is turned on. • WHEN SWITCHED OFF: Sensor cleaning will be performed when the camera turns off (sensor cleaning is not however performed if the camera turns off in playback mode). N Dust that can not be removed using sensor cleaning can be removed manually.
USER SETTING RESET Reset shooting or setup menu options to default values. Custom white balance, custom settings banks created using EDIT/SAVE CUSTOM SETTING, WIRELESS SETTINGS, and the setup menu DATE/TIME and TIME DIFFERENCE options are not affected. 1 2 Highlight the desired option and press the selector right. A confirmation dialog will be displayed; highlight OK and press MENU/OK.
D SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, select the D (SET UP) tab, and choose SOUND SETTING. SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. HEADPHONES VOLUME SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME AF BEEP VOL. Choose the volume of the beep that sounds when the camera focuses. The beep can be muted by selecting f. Options b (high) c (medium) d (low) f (mute) Options b (high) c (medium) d (low) f (mute) OPERATION VOL.
SOUND SETTING HEADPHONES VOLUME Adjust headphone volume. Choose from values between 0 and 10. SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose f to disable the shutter sound. Options b (high) c (medium) d (low) f (mute) SHUTTER SOUND Choose the sound made by the electronic shutter. i Options j k PLAYBACK VOLUME Adjust playback volume. Choose from values between 0 and 10.
D SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SETTING. SCREEN SETTING EVF BRIGHTNESS EVF COLOR LCD BRIGHTNESS LCD COLOR IMAGE DISP. AUTOROTATE DISPLAYS PREVIEW EXP./WB IN MANUAL MODE PREVIEW PIC. EFFECT EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder. Select MANUAL to choose from 11 options from +5 (bright) to −5 (dark), or select AUTO for automatic brightness adjustment.
IMAGE DISP. Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities. Option CONTINUOUS 1.5 SEC 0.5 SEC OFF Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom.
SCREEN SETTING PREVIEW EXP./WB IN MANUAL MODE Select PREVIEW EXP./WB to enable exposure and white balance preview in manual exposure mode, or choose PREVIEW WB to preview only white balance (PREVIEW WB is recommended in situations in which exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp). Select OFF when using a flash or on other occasions on which exposure may change when the picture is taken. PREVIEW EXP.
FRAMING GUIDELINE Choose a framing grid for shooting mode. Option G GRID 24 F GRID 9 Display P For “rule of thirds” composition. P H HD FRAMING P A six-by-four grid. Frame HD pictures in the crop shown by the lines at the top and bottom of the display. Framing guides can be changed as desired for tethered shooting. N Framing guides are not shown at default settings but can be displayed using D SCREEN SETTING > DISP. CUSTOM SETTING (P 158).
SCREEN SETTING AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON OFF FOCUS SCALE UNITS Choose the units used for the focus distance indicator.
DISP. CUSTOM SETTING Choose the items shown in the standard indicator display. 1 In shooting mode, press DISP/BACK until standard indicators are displayed. 2 Press MENU/OK and select D SCREEN SETTING > DISP. CUSTOM SETTING in the D (SET UP) tab. 3 Highlight items and press MENU/OK to select or deselect.
SCREEN SETTING SUB MONITOR SETTING Choose the items shown in the secondary LCD monitor. 1 Press MENU/OK and select D SCREEN SETTING > SUB MONITOR SETTING in the D (SET UP) tab. 2 Select STILL MODE or MOVIE MODE. 3 Highlight items for display in positions A to H and press MENU/OK to select or deselect. Items not available when MOVIE MODE is selected are indicated by asterisks (“*”). • Text (items A to D): 4 Press DISP/BACK to save changes. The Setup Menus SHUTTER SPEED, APERTURE, EXPO.
D BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING. BUTTON/DIAL SETTING FOCUS LEVER SETTING EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING SELECTOR BUTTON SETTING COMMAND DIAL SETTING SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS FOCUS LEVER SETTING Choose the functions performed by the focus stick (focus lever). Option LOCK (OFF) The Setup Menus Description The focus stick can not be used during shooting.
BUTTON/DIAL SETTING EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu. 1 Select D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the D (SET UP) tab. 2 The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position. * * * * * * * * * * * Stored in custom settings bank.
FUNCTION (Fn) SETTING Choose the roles played by the function buttons. The Setup Menus 8 1 Select D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING in the D (SET UP) tab. 2 3 Highlight the desired control and press MENU/OK. Highlight any of the following options and press MENU/OK to assign it to the selected control. • EXP.
BUTTON/DIAL SETTING AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway. MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash). TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 114).
SELECTOR BUTTON SETTING Choose the roles played by the up, down, left, and right buttons on the selector. Option Fn BUTTON FOCUS AREA Description The selector buttons serve as function buttons. The selector buttons can be used to position the focus area. N Selecting FOCUS AREA prevents you accessing the functions assigned to the function buttons. COMMAND DIAL SETTING Choose the roles played by the command dials. Option Y F X S.S. Y S.S.
BUTTON/DIAL SETTING SHUTTER AE If ON is selected, exposure will lock while the shutter button is pressed halfway. Options ON OFF N Select OFF to allow the camera to adjust exposure before each shot taken in burst mode. SHOOT WITHOUT LENS Choose ON to enable the shutter release when no lens is attached.
BUTTON/DIAL SETTING EXPO. COMP. BUTTON SETTING Control the behavior of the rear command dial and the button to which exposure compensation is assigned. If d ON WHEN PRESSING is selected, exposure compensation can be adjusted by holding the button while rotating dial; if d ON/OFF SWITCH is selected, exposure compensation can be set by pressing the button once, rotating the dial, and then pressing the button again.
D POWER MANAGEMENT Adjust power management settings. To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT. POWER MANAGEMENT AUTO POWER OFF SHOOTING STAND BY MODE AUTO POWER SAVE AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually.
POWER MANAGEMENT AUTO POWER SAVE If ON is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.
D SAVE DATA SETTING Make changes to file management settings. To access file management settings, press MENU/OK, select the D (SET UP) tab, and choose SAVE DATA SETTING. SAVE DATA SETTING FRAME NO. SAVE ORG IMAGE EDIT FILE NAME CARD SLOT SETTING (STILL IMAGE) SWITCH SLOT (SEQUENTIAL) MOVIE FILE DESTINATION COPYRIGHT INFO Option CONTINUOUS RENEW Description Numbering continues from the last file number used or the first available file number, whichever is higher.
SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options ON OFF EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”) preceded by an underscore. Option sRGB Adobe RGB Default prefix DSCF _DSF Sample file name ABCD0001 _ABC0001 N File name prefixes can be edited using touch controls.
SAVE DATA SETTING MOVIE FILE DESTINATION Choose the slot used to store movies. Options SLOT 1 SLOT 2 COPYRIGHT INFO Copyright information, in the form of Exif tags, can be added to new images as they are taken. Changes to copyright information are reflected only in images taken after the changes are made. Option Description DISP COPYRIGHT INFO View the current copyright information. ENTER AUTHOR’S INFO Enter the creator’s name. ENTER COPYRIGHT INFO Enter the name of the copyright holder.
D CONNECTION SETTING Adjust settings for connection to other devices. To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING. CONNECTION SETTING WIRELESS SETTINGS PC CONNECTION SETTING GEOTAGGING SET-UP instax PRINTER CONNECTION SETTING PC SHOOT MODE WIRELESS SETTINGS Adjust settings for connection to wireless networks.
CONNECTION SETTING PC CONNECTION SETTING Choose the method used for connection to computers. Choose SIMPLE SETUP to connect using WPS, MANUAL SETUP to configure network settings manually. Options SIMPLE SETUP MANUAL SETUP N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ GEOTAGGING SET-UP View location data downloaded from a smartphone and choose whether to save the data with your pictures.
CONNECTION SETTING PC SHOOT MODE Adjust settings for remote photography (tethered shooting). Option OFF USB AUTO USB FIXED Description Choose this option if you do not intend to use tethered shooting. Tethered shooting mode is selected automatically when the camera is connected to a computer via USB. When no computer is connected, the results are the same as OFF. The camera functions in tethered shooting mode even when not connected to a computer.
Shortcuts 175
Shortcut Options Customize camera controls to suit your style or situation. Frequently-used options can be added to the Q menu or a custom “my” menu or assigned to an Fn (function) button for direct access: • The Q menu (P 177): The Q menu is displayed by pressing the Q button. Use the Q menu to view or change the options selected for frequently-used menu items. • “My menu” (P 184): Add frequently-used options to this custom menu, which can be viewed by pressing MENU/OK and selecting the E (“MY MENU”) tab.
The Q (Quick Menu) Button Press Q for quick access to selected options. The Quick Menu Display At default settings, the quick menu contains the following items: SELECT CUSTOM SETTING BASE SET I HIGHLIGHT TONE J SHADOW TONE K COLOR L SHARPNESS M SELF-TIMER N FACE/EYE DETECTION SETTING O FLASH FUNCTION SETTING P EVF/LCD BRIGHTNESS The quick menu shows the options currently selected for items B–P, which can be changed as described on page 179.
Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 Use the selector to highlight items and rotate the rear command dial to change. SELECT CUSTOM SETTING BASE N Changes are not saved to the current settings bank. Settings that differ from those in the current settings bank (t–u) are shown in red. 3 SET Press Q to exit when settings are complete. Shortcuts N The quick menu can also be edited using touch controls.
The Q (Quick Menu) Button Editing the Quick Menu To choose the items displayed in the quick menu: 1 Press and hold the Q button during shooting. 2 The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position. * * * * * * * * * * * Stored in custom settings bank.
The Fn (Function) Buttons Assign roles to the function buttons and the center of the rear command dial for quick access to selected features.
The Fn (Function) Buttons Fn7 button Fn8 button Film simulation White balance Fn9 button Center of rear command dial Rapid AF Focus check Shortcuts 9 181
Assigning Roles to the Function Buttons To assign roles to the buttons: Shortcuts 9 1 Press and hold the DISP/BACK button until a button selection menu is displayed. 2 3 Highlight a button and press MENU/OK. Highlight the desired role and press MENU/OK to assign it to the selected button. Choose from: • EXP.
The Fn (Function) Buttons AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway. MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash). TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 114).
E MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the shooting display and select the E (MY MENU) tab. MY MENU SELF-TIMER INTERVAL TIMER SHOOTING FILM SIMULATION GRAIN EFFECT OFF ON OFF OFF FACE/EYE DETECTION SETTING STD ISO AUTO SETTING SHUTTER TYPE IS MODE EXIT N The E tab is only available if options have been assigned to MY MENU.
MY MENU MY MENU SETTING To choose the items listed in the E (MY MENU) tab: 1 2 Highlight D USER SETTING > MY MENU SETTING in the D (SET UP) tab and press MENU/OK to display the options at right. マイメニュー設定 MY MENU SETTING マイメニュー登録 順序変更 削除 MY MENU SETTING RANK ITEMS REMOVE ITEMS Press the selector up or down to highlight MY MENU SETTING and press MENU/OK. Options that can be added to “my menu” are highlighted in blue.
MEMO 186
Peripherals and Optional Accessories 187
Lenses The camera can be used with lenses for the FUJIFILM G-mount. Lens Parts Peripherals and Optional Accessories A Lens hood B Mounting marks C Focus ring D Aperture ring lock release E Mounting marks (focal length) F Aperture ring G Lens signal contacts H Front lens cap I Rear lens cap N A GF63mmF2.8 R WR lens is used here for illustrative purposes.
Lenses Lens Care Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. Replace the front and rear caps when the lens is not in use. Removing Lens Caps Remove lens caps as shown. Attaching Lens Hoods When attached, lens hoods reduce glare and protect the front lens element.
Vertical Battery Grips The optional VG-GF1 vertical battery grip accommodates an extra battery for improved endurance and makes it easier to hold the camera rotated 90° to frame pictures in “tall” (portrait) orientation.
Vertical Battery Grips Attaching the VB-GF1 The VB-GF1 attaches as shown below. 1 Remove the vertical battery grip connector cover from the camera and place it in the grip connector cover compartment. (B) (A) (B) (A) Peripherals and Optional Accessories 2 Align the connectors on the grip with the matching connectors on the camera. Rotate the lock screw knob to tighten the lock screw.
Inserting a Battery Insert a battery as shown below. 1 Unlatch and open the battery-chamber cover. 2 Slide the battery in until it latches. 3 Close the battery-chamber cover. Peripherals and Optional Accessories O The battery in the grip is used before the battery in the camera. The camera automatically switches to the camera battery when the battery in the grip is exhausted. Movie recording and bulb photography will end when the camera switches batteries.
Vertical Battery Grips Using an AC Adapter An optional AC-15V AC adapter can be used to power the camera when the battery grip is attached. The battery inserted in the grip will charge while the adapter is connected; charging takes about 120 minutes. Turn the camera off before disconnecting the AC adapter. Peripherals and Optional Accessories Battery charge status is shown by battery status icons when the camera is on (playback mode) and by the indicator lamp when the camera is off.
Viewfinder Tilt Adapters The optional EVF-TL1 tilt adapter lets you swivel the viewfinder left or right ±45° or up or down between 0° and 90°.
Viewfinder Tilt Adapters Attaching the EVF-TL1 Slide the EVF-TL1 onto the camera hot shoe and then attach the EVF-GFX1 electronic viewfinder. N Remove the hot shoe covers from the camera and EVF-TL1 before attaching the adapter and viewfinder. Removing the EVF-TL1 Remove the viewfinder and then, keeping the lock releases (A) pressed, press down on the front of the adapter (B) and slide it from the camera as shown. Peripherals and Optional Accessories O Use only one tilt adapter at a time.
Viewfinder Tilt Adapters Using the EVF-TL1 Swivel the viewfinder into the desired position. Swiveling the Viewfinder Up or Down Loosen the tilt lock knob and swivel the viewfinder up or down from 0° to 90°. With the viewfinder in the desired position (A), tighten the tilt lock knob (B) to lock the viewfinder in place. Peripherals and Optional Accessories 10 Swiveling the Viewfinder Left or Right Release the horizontal swivel lock as shown and swivel the viewfinder left or right ±45°.
External Flash Units Flash units can be mounted on the hot shoe or connected via the sync terminal. External flash units are more powerful than their built-in counterparts. Some support high-speed sync (FP) and can be used at shutter speeds faster than the flash sync speed, while others can function as master flash units controlling remote units via optical wireless flash control. O You may be unable to test-fire the flash in some circumstances, for example when a setup menu is displayed on the camera.
Flash Settings To adjust settings for a flash unit mounted on the hot shoe or connected via the sync terminal: 1 2 Connect the unit to the camera. In shooting mode, select FLASH FUNCTION SETTING in the F (FLASH SETTING) menu tab. The options available vary with the flash unit.
External Flash Units SYNC TERMINAL The following options are available when no compatible flash unit is connected or if a unit is connected via the sync terminal or uses only the X-contact on the hot shoe. MODE SYNC TERMINAL ADJUST END Setting The Sync Terminal Use the sync terminal to connect flash units that require a sync cable.
SHOE MOUNT FLASH The following options are available when an optional shoe-mounted flash unit is attached and turned on. MODE SHOE MOUNT FLASH ADJUST Setting END Peripherals and Optional Accessories Description The flash control mode selected with the flash unit. This can in some cases be adjusted from the camera; the options available vary with the flash. • TTL: TTL mode. Adjust flash compensation (B).
External Flash Units Setting 201 Peripherals and Optional Accessories Description The options available vary with flash control mode. • TTL: Adjust flash compensation (the full value may not be applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit. B Flash compensation/ • M/MULTI: Adjust flash output (compatible units only).
Setting Peripherals and Optional Accessories Description The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be E Zoom made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. F Lighting • K (STANDARD): Match coverage to picture angle.
External Flash Units MASTER(OPTICAL) The options will be displayed if the unit is currently functioning as master flash for FUJIFILM optical wireless remote flash control. MODE MASTER(OPTICAL) ADJUST C A B Peripherals and Optional Accessories The master and remote units can be placed in up to three groups (A, B, and C) and flash mode and flash level adjusted separately for each group.
Setting A Flash control mode (group A) B Flash control mode (group B) C Flash control mode (group C) D Flash compensation/ Peripherals and Optional Accessories output (group A) E Flash compensation/ output (group B) F Flash compensation/ output (group C) 10 204 Description Choose flash control modes for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group.
External Flash Units Setting G Flash mode (TTL) I Zoom 205 Peripherals and Optional Accessories H Sync Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
External Flash Units Setting J Lighting K Master K Number of flashes Peripherals and Optional Accessories L Channel L Frequency 10 206 Description If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. Assign the master flash to group A (Gr A), B (Gr B), or C (Gr C).
Connections 207
HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below, making sure the connectors are fully inserted. Insert into HDMI connector Insert into HDMI Micro connector (Type D) O Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
HDMI Output Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. Playback To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume. O Some televisions may briefly display a black screen when movie playback begins.
Wireless Transfer Establish a wireless LAN connection between your camera and smartphone. For downloads and other information, visit: http://fujifilm-dsc.com/wifi/ Wireless Connections: Smartphones Install the “FUJIFILM Camera Remote” app on your smartphone to browse the images on the camera, download selected images, control the camera remotely, or copy location data to the camera.
Connecting to Computers via USB Connect the camera to a computer to download pictures or take pictures remotely. Tethered Shooting Take pictures remotely. Mac OS X/macOS Tethered shooting is available to purchasers of Adobe® Photoshop® Lightroom® and the FUJIFILM Tether Shooting PRO or Tether Shooting plug-ins. The FUJIFILM Tether Shooting PRO and Tether Shooting plug-ins are available from the Adobe add-ons website.
Copying Pictures to a Computer Pictures can be copied to Windows and Mac OS X/macOS computers as described below. For information on using the software described, see online help. Windows Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized, and printed. MyFinePix Studio is available for download from the following website: http://fujifilm-dsc.com/mfs/ Once download is complete, double-click the downloaded file (“MFPS_Setup.
Connecting to Computers via USB Connecting the Camera 1 Find a memory card containing pictures you want to copy to the computer and insert the card into the camera. O Loss of power during transfer could result in loss of data or dam- age to the memory card. Insert a fresh or fully-charged battery before connecting the camera. 2 Turn the camera off and connect a third-party USB 3.0 or 2.0 cable (either type can be used), making sure the connectors are fully inserted.
Connecting to Computers via USB O If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer. Connect the camera directly to the computer; do not use a USB hub or keyboard.
instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING TO PRINTER FUJIFILM-CAMERA-1234 CANCEL N To print a frame from a burst sequence, display the frame before selecting instax PRINTER PRINT. 3 Use the selector to display the picture you want to print, then press MENU/OK.
Technical Notes 217
Accessories from FUJIFILM The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/products/ digital_cameras/index.html. Rechargeable Li-ion batteries NP-T125: Additional high-capacity NP-T125 rechargeable batteries can be purchased as required. Battery chargers BC-T125: Replacement battery chargers can be purchased as required.
Accessories from FUJIFILM Vertical battery grips VG-GFX1: This grip accommodates an extra battery for improved endurance and makes it easier to hold the camera rotated 90° to frame pictures in “tall” (portrait) orientation. The battery in the grip can be charged using an optional AC-15V AC adapter. Tilt adapters EVF-TL1: This adapter lets you swivel the viewfinder left or right ±45° or up or down between 0° and 90° to take shots from different angles.
Accessories from FUJIFILM Body caps BCP-002: Cover the camera lens mount when no lens is attached. instax SHARE printers SP-1/SP-2: Connect via wireless LAN to print pictures on instax film.
For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating instructions • Read Instructions should be read before the appliance is operated. Instructions: The safety and operating instructions • Retain Instructions should be retained for future reference. Warnings: All warnings on the appliance and in the • Heed Warnings operating instructions should be adhered to. Instructions All operating and use instructions • Follow Instructions: should be followed.
Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualified service personlight or power circuits, or where it can fall into such power nel under the following conditions: lines or circuits.
For Your Safety WARNING Do not disassemble Do not touch internal parts WARNING Using a flash too close to a person’s eyes may cause visual impairment. Take particular care when photographing infants and young children. Do not remain in prolonged contact with hot surfaces.
CAUTION Do not cover or wrap the camera or the AC power adapter in a cloth or blanket. This can cause heat to build up and distort the casing or cause a fire. When you are cleaning the camera or you do not plan to use the camera for an extended period, remove the battery and disconnect and unplug the AC power adapter. Failure to do so can cause a fire or electric shock. When charging ends, unplug the charger from the power socket. Leaving the charger plugged into the power socket can cause a fire.
For Your Safety Using the Camera Trademark Information such as the sun in a cloudless sky. Failure to observe this Digital Split Image is a trademark or registered trademark precaution could damage the camera image sensor. of FUJIFILM Corporation. xD-Picture Card and E are • Strong sunlight focused through the viewfinder may dam- trademarks of FUJIFILM Corporation. The typefaces included age the panel of electronic viewfinder (EVF). Do not aim herein are solely developed by DynaComware Taiwan Inc.
NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Contains IC : 7736B-02000003 Contains FCC ID : W2Z-02000003 FCC Statement: This device complies with Part 15 of the FCC Rules.
For Your Safety For Customers in Canada CAN ICES-3 (B)/NMB-3(B) CAUTION: This Class B digital apparatus complies with Canadian ICES-003. Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Be sure to read these notes before use Safety Notes WARNING • Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place. Do not immerse About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.
For Your Safety European Union Regulatory Notice This product complies with the following EU Directives: • RoHS Directive 2011/65/EU • R & TTE Directive 1999/5/EC Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by FUJIFILM Corporation for this product or product family.
Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth.
Cleaning the Image Sensor Dust that can not be removed using D USER SETTING > SENSOR CLEANING can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. O Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary.
Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: http://www.fujifilm.com/support/digital_cameras/software Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. 1 Turn the camera off and check that a memory card is inserted. 2 Turn the camera on while holding the DISP/BACK button. The current firmware version will be displayed; check the firmware version.
Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local FUJIFILM distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 27). The camera does not turn on. • The battery is inserted incorrectly: Reinsert in the correct orientation (P 30).
Problem Solution • There is dirt on the battery terminals: Clean the terminals The charging lamp blinks, but the battery does not charge. with a soft, dry cloth (P 30). • The battery has been charged many times: The battery has reached the end of its charging life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer (P 218). Menus and Displays Problem Solution Select ENGLISH for D USER SETTING > a Display is not in English. (P 38, 148).
Troubleshooting Problem Solution • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 100). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face occupies a larger area of the frame (P 100). • The subject’s head is tilted or horizontal: Ask the subject to hold their head straight (P 100). • The camera is tilted: Keep the camera level.
Playback Problem Solution The pictures were taken with a different make or model of Pictures are grainy. camera. Playback zoom is The pictures were created using RESIZE or with a different unavailable. make or model of camera. • Playback volume is too low: Adjust playback volume (P 152). No sound in movie • The microphone was obstructed: Hold the camera correctly during recording. playback. • The speaker is obstructed: Hold the camera correctly during playback.
Troubleshooting Wireless Transfer For additional information on troubleshooting wireless connections, visit: http://digital-cameras.support.fujifilm.com/app?pid=x Problem Problem connecting or uploading pictures to smartphone. Solution • The smartphone is too far away: Move the devices closer (P 210). • Nearby devices are causing radio interference: Move the cam- era and smartphone away from microwave ovens or cordless phones (P 210).
Troubleshooting Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinsert the battery (P 30). • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 27). • The camera is connected to a wireless LAN: End the con- The camera is unresponsive. nection. • The controls are locked: Press and hold the MENU/OK button to unlock the controls (P 5).
Warning Messages and Displays The following warnings appear in the display. Warning Description Low battery. Charge the battery or insert a fully-charged i (red) spare battery. Battery exhausted. Charge the battery or insert a fulj (blinks red) ly-charged spare battery. The camera can not focus. Use focus lock to focus on ans (displayed in red with other subject at the same distance, then recompose the red focus frame) picture.
Warning Description • The memory card is not formatted for use in the camera: Format the card. • The memory card contacts require cleaning or the memory card CARD ERROR PROTECTED CARD BUSY b MEMORY FULL WRITE ERROR FRAME NO. FULL Technical Notes 12 240 is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Incompatible memory card: Use a compatible card. • Camera malfunction: Contact a FUJIFILM dealer.
Warning Messages and Displays Warning Description • The file is corrupt or was not created with the camera: The file can not be viewed. READ ERROR • The memory card contacts require cleaning: Clean the con- tacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a FUJIFILM dealer. An attempt was made to delete or rotate to a protected picPROTECTED FRAME ture. Remove protection and try again.
Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate. Capacity Photos Movies * T O 4∶3 RAW (UNCOMPRESSED) RAW (LOSSLESS COMPRESSED) i1080/29.97P, 25P, 24P, 23.
Specifications System Model Product Number Effective pixels Image sensor Storage media Memory card slots File system 243 Technical Notes FUJIFILM GFX 50S FF160005 Approx. 51.4 million 43.8 mm × 32.9 mm Bayer array with primary color filter FUJIFILM-recommended SD/SDHC/SDXC memory cards Two SD memory card slots (UHS-II compliant) Compliant with Design Rule for Camera File System (DCF), Exif 2.3, and Digital Print Order Format (DPOF) File format • Still pictures: Exif 2.
System Shutter speed Mode P MECHANICAL SHUTTER 4 s to ¼ s E-FRONT CURTAIN SHUTTER ELECTRONIC SHUTTER MECHANICAL + 4 s to ⁄ s ELECTRONIC E-FRONT CURTAIN + ELECTRONIC Continuous Other modes Time Bulb 60 min. to ¼ s 60 min. to ¼ s Max. 60 min. 60 min. to ⁄ s 60 min. to ⁄ s Max. 60 min. • Available frame advance rates (JPEG): 3.0 fps • Approximate maximum number of shots per burst: 25 O The frame rate varies with shooting conditions and the number of images recorded.
Specifications System Viewfinder LCD monitor EVF-GFX1 interchangeable electronic viewfinder (supplied) • Rear monitor: 3.2-in/8.1 cm, 2360k-dot color LCD touch screen with 3-way tilt • Shoulder monitor: 1.28-in/3.25 cm, 128 × 128-dot memory LCD monitor h 720/29.97P Movies (with stereo i 1080/29.97P i 1080/25P h 720/25P sound) i 1080/24P h 720/24P i 1080/23.98P h 720/23.98P Input/output terminals Microphone connector ⌀3.5 mm mini-stereo jack Headphone ⌀3.5 mm mini-stereo jack Digital input/output USB3.
Power supply/other Power supply Battery life • NP-T125 rechargeable battery (supplied with camera) • AC-15V AC adapter (available separately) • Battery type: NP-T125 • Photographs: The number of frames varies with the option selected for AUTO POWER SAVE: Camera battery alone AUTO POWER SAVE LCD ON Approx. 400 OFF Approx. 340 EVF Approx. 400 Approx. 340 Technical Notes With battery grip AUTO POWER SAVE LCD EVF ON Approx. 800 Approx. 800 OFF Approx. 660 Approx.
Specifications Wireless transmitter Standards IEEE 802.11b/g/n (standard wireless protocol) Operating frequency 2,412 MHz–2,462 MHz (11 channels) Access protocols Infrastructure EVF-GFX1 interchangeable electronic viewfinder Type OLED Size 0.5-in/1.3 cm Pixel count Approximately 3.69 million dots Magnification 0.85× with 50 mm lens (35 mm format) at infinity and diopter set to −1.
Specifications BC-T125 battery charger Rated input 100 V – 240 V AC, 50/60 Hz Input capacity 23 –31 VA Rated output 12.6 V DC, 800 mA Supported batteries NP-T125 rechargeable batteries Charging time Approx. 140 minutes (+25 °C/+77 °F) Operating +5 °C to +40 °C/+41 °F to +104 °F temperature Dimensions 71.4 mm × 97.0 mm × 34.2 mm/2.8 in. × 3.8 in. × 1.4 in., excluding projections (W × H × D) Weight Approx. 120 g/4.2 oz. Weight and dimensions vary with the country or region of sale.
MEMO 249
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.com/products/digital_cameras/index.
