User Manual

18
EN
LED status
Problems Possible Causes Solutions
The lm remaining LED
ashes rapidly, then the
printer turns itself o.
● A printer error has occurred. ● Turn the printer on.
The battery remaining
LED ashes red slowly,
then the printer turns
itself o.
● The battery power is low. ●Charge the battery fully.
When the remaining battery life is low, you
cannot turn the printer on even though the
printer is connected to the AC power outlet using
the USB cable. Turn the printer on after time has
elapsed since you started charging.
The lm remaining
LED ashes during
communication and
printing does not start.
● Communication has been
interrupted for some reason.
● Turn the printer on, then restart the application
on your device.
The battery remaining
LED alternately ashes
green and red slowly.
1 The battery is being charged
beyond the operation temperature.
2
The battery life has expired or there
is a problem with the USB cable or AC
power adapter.
1 Charge the battery between +5°C and +40°C
(+41°F and +104°F).
2
Replace the battery, USB cable, or AC power
adapter with a new one.
The battery remaining
LED alternately ashes
green and red rapidly.
● The battery life has expired or there
is a problem with the USB cable or AC
power adapter.
● Replace the battery, USB cable, or AC power
adapter with a new one.
instax_BO-B_6lang.indb 18 4/13/2016 10:33:40 AM