User Manual

6
3
Close the film door�
4
Remove the black film cover that is automatically
rejected�
Unloading a Used Film Pack
1
Slide the film door lock and open the film door�
1
2
2
Grasp the rectangular holes on the film pack, then
pull film pack out from the printer�
2
1
Turning on/off the Printer
Press and hold the Power button for approximately 1 second to
turn the printer on or off.
Turning the printer on lights up the LED.
If no operation occurs for roughly 10 minutes, the printer turns off
automatically.
Checking the Printer Status with the LED
Light on Printer
You can check the printer status with the LED.
Color LED status Status
Blue Lighting Connecting to the App/
Print mode
Orange Lighting Connecting to the App/Fun
mode
Pink Lighting Connecting to the
App/INSTAX Camera mode
White Flashing wave-
like form
Connecting to the App/
Operation screen
White Flashing Firmware is being updated
Purple Lighting Reprinting
Rainbow color Flashing Transferring an image
–* Flashing* Printing
Yellow Lighting Critical error occurred
Yellow Flashing quickly Non-critical error occurred
Yellow Flashing slowly Minor error occurred
Red Flashing Charging
Green Flashing Almost charged
Green Lighting Charged (When the printer
is turned on and not
connected to the App)
*During printing, the color of the flashing LED changes depending
on the main colors of the image being transferred.