WW_EN [INSTANT PRINT + DIGITAL TECHNOLOGIES] User’s Guide (Full version) AX LENS 2 INST 8m m .0 F2 RANGE 0.1m CUS ~∞ FO • This User's Guide (Full version) corresponds to firmware version Ver.1.01. Depending on the firmware version, the functions and screens may differ from those described. • There are two methods to upgrade the firmware. For details, refer to [FIRMWARE UPGRADE].(p.
Table of Contents Before Use ����������������������������������������������������������������������������������� 3 Notes on Disposing of the Camera ���������������������������������������� 3 About This Camera �������������������������������������������������������������������� 3 Various Shots ����������������������������������������������������������������������������17 Changing the Brightness of the Image �������������������������������������� 17 Using the Self-Timer to Take Photos �����������������������
WW_EN Before Use Before using the camera, check you have the following. Supplied Accessories • Shoulder strap (1) In Countries outside of EU: If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. This Symbol on the batteries or accumulators indicates that those batteries should not be treated as household waste. For customers in Turkey: EEE Complies with Directive.
1 Film ejection slot The exposed film is ejected from the film ejection slot during printing. Part Names Front 1 13 2 Flash The flash operates depending on the setting. You can also set the flash to not operate. 2 12 3 11 4 5 10 6 9 7 3 Self timer lamp/Charging lamp The self timer lamp/charging lamp blinks when you take a photo with the self-timer. It also lights up during charging and turns off when charging is complete. 4 Shutter button Press the shutter button halfway to focus on the subject.
WW_EN 15 LCD Screen You can see the subject to be photographed during shooting and check photos you have taken on the LCD Screen. You can also view and select the menus on the LCD Screen. 16 Select buttons ( ) Use the select buttons to select menu items and to use the functions displayed on the LCD Screen. 17 MENU/OK button During shooting or playback, press the MENU/OK button to display the menu on the LCD Screen. This button is also used to confirm menu items.
LCD Screen display When the camera is turned on, the shooting screen appears on the LCD Screen. • To switch from the shooting screen to the playback screen, press the (Playback) button. • To switch from the playback screen to the shooting screen, press the Shutter button fully. If you press (Back) while the shooting screen or playback screen is displayed, the following information will appear on the LCD Screen. To return to the shooting screen or playback screen, press (Back) again.
WW_EN Using the Select buttons Attaching the Shoulder Strap The (Up/Down/Left/Right) buttons are used to select menu items and to call the functions assigned to the buttons. The [MENU/OK] button is used to display menus and make selections. Follow the steps below to attach the shoulder strap to the camera body. 1 Insert one end of the shoulder strap through the strap hook on the camera. 2 Attach the strap body to the end of the strap. 3 Attach the other end in the same manner.
Charging the Battery T urn off the camera before charging the battery. Battery will not charge if the camera is turned on. Be careful to properly attach cable as indicated below Power On/Off To turn the camera on, turn the power switch clockwise. Connect the camera using the supplied Micro USB cable to a USB AC adapter (supplied with your smartphone) then connect the USB AC adapter to an indoor power outlet. Charging time is approximately 2 to 3 hours.
WW_EN How to Check the Battery Level Press (Back) on the shooting or playback screen to display the remaining battery charge on the LCD Screen. Display Remaining battery charge Sufficient battery charge remaining. Less than half of battery charge remaining. Recharging the battery is recommended. Low battery charge. Please recharge the battery as soon as possible. ) will also appear in • When the battery charge is low, an icon ( the lower right corner of the LCD Screen.
3 Set the year, month, and date in that order, and then press [MENU/OK]. 6 Launch the “instax mini Evo” smartphone app and tap [SETTINGS]. DATE/TIME YY.MM.DD DD.MM.YY MM/DD/YY NO 4 SETTINGS Set the year, month, day, hour, and minute, and then press [MENU/OK]. Press to select the item to be set (year, month, day, hour, minute) and then press and to select the number to be set. DATE/TIME YY.MM.DD 7 Tap [Bluetooth settings] on the smartphone app.
WW_EN 8 Tap [Connect] on the smartphone app. Loading/Unloading the instax mini Instant Film Pack Loading the Film Pack 1 Slide the film door lock and open the film door. 1 2 Connect 2 • To check the camera’s OWN NAME, display the shooting menu. (p. 22) Then, select [BLUETOOTH SETTINGS], [INFORMATION], and [OWN NAME] in this order. 9 10 Insert film pack by aligning the yellow marks. 2 Allow pairing. Confirm that pairing registration has been completed.
Unloading a Used Film Pack Basic Shooting and Playback 1 Taking Photos Slide the film door lock and open the film door. 1 2 2 Grasp the rectangular holes on the film pack, then pull film pack out from the camera. 2 This section explains the basic procedures to take photos. 1 2 3 4 5 Turn on the power. Hold the camera. Set effects and other settings as desired. Compose the photo. Press or to adjust the composition. Press to take a larger image of a distant subject, or press to take a larger area.
WW_EN 6 Hold the Shutter button halfway down and press it in (all the way down) After taking a photo, the image is stored in the internal memory or on the memory card. • See “Print” for the procedure to print photos you have taken. (p. 14) • When taking a photo, hold your arms tightly against your body and hold the camera firmly with both hands. • Be careful not to touch the camera lens when you press the Shutter button.
■■Changing the Number of Frames Displayed When the playback screen is displayed, press change the number of frames displayed. (Playback) to Print 1 2 Press the (Playback) button. Press or on the Select button to select the photo you want to print. 3 You have the option to enlarge the photo, or make other edits. 4 Turn the print lever to print. 5 After the sound of the film ejecting stops, hold the tip of the ejected film and remove it.
WW_EN About the Remaining Film Sheets Display The number of remaining film sheets is indicated by a white dot at the bottom of the screen. Each time you finish a print, this dot turns gray. When there are only two film sheets remaining, the dot turns red. 10 sheets remaining display Adding Effects to Your Photos Selecting Lens Effects Follow the steps below to select the type of lens effect to apply. 1 2 Display the shooting screen. Rotate the Lens dial to select the type of lens effect.
Selecting a Film Effect Specifying an Effect Combination Follow the steps below to select the type of film effect. 1 2 Display the shooting screen. Turn the film dial to select the type of film effect. The following guide appears. FILM #1 Normal • To cancel the set film effect, select [Normal] from the film effect types. • Press the Effect reset button to cancel the set lens effect and film effect.
WW_EN Using the Self-Timer to Take Photos Various Shots Changing the Brightness of the Image Adjust the brightness of the image. Use this function when the subject is too bright or too dark, or when the contrast (difference between light and dark) between the subject and the background is too great. 1 Use this function to take a group photo including the photographer or to prevent the camera from moving while the Shutter button is pressed. 1 Press or until [SELF-TIMER] appears on the shooting screen.
Taking Photos with the Flash Use the flash when taking photos at night or in a dark room. You can also set the camera so that the flash does not fire. 1 Press or screen. until [FLASH] appears on the shooting Taking Macro Photos Use macro shooting when you want to get close to the subject. 1 Press or until [MACRO] appears on the shooting screen. MACRO FLASH OFF AUTO FLASH ON FORCED FLASH SUPPRESSED FLASH 2 3 Press or to select the flash setting.
WW_EN Matching the Light Source when Taking Photos By setting the white balance to match the light source, such as sunlight or artificial lighting, you can shoot with colors closer to real life. 1 Taking a Photo of Yourself (Selfie) You can use the selfie mirror to take photos of yourself. 1 Press or until [WHITE BALANCE] appears on the shooting screen. Hold the camera securely so that your face comes 30 to 50 cm away from the end of the lens.
Using AF/AE Lock to Take Photos When taking a photo, pressing and holding the Shutter button halfway to lock the focus is called “AF lock,” and pressing and holding the Shutter button to lock the brightness is called “AE lock.” This is useful when you want to take a photo where the subject is not in the center of the screen. 1 Press the Shutter button halfway to bring the subject into focus. Press the Shutter button halfway to lock AF or AE.
WW_EN Using the Memory Card The camera's internal memory can store about 45 still images, but you can store more images by using a memory card. You will also need a memory card to upgrade the firmware. Please prepare a memory card in advance. Precautions Regarding Memory Cards • This camera is compatible with micro SD cards and micro SDHC cards. Using other types of memory cards may cause damage to the camera. • Memory cards are small and may be accidentally swallowed by infants.
Using the Shooting Menu You can use the shooting menu to change various settings related to shooting. 1 On the shooting screen, press [MENU/OK]. The shooting menu appears. SHOOTING MENU FACE DETECTION AF ILLUMINATOR BLUETOOTH SETTINGS PRINT QUALITY MODE Print Brightness DATE/TIME 2 Press 3 4 Changing the Settings. or to select an item. • For details on each item, see “Shooting Menu Items”. Press [MENU/OK]. The setting is applied and the display returns to the shooting screen.
WW_EN ●●Using the Camera 1. Download the latest firmware (FPUPDATE.DAT) from the FUJIFILM website using a PC or other device, and copy it to the root directory of the memory card 2. Insert the memory card with the copied firmware into the camera card slot 3. Select [FIRMWARE UPGRADE] from the SHOOTING MENU or PLAYBACK MENU 4. Follow the on-screen instructions Using the PLAYBACK MENU You can use the PLAYBACK MENU to change various playbackrelated settings.
Smartphone App Linked Functions The following functions are available when connected with the “instax mini Evo” smartphone app. Specifications ■■Camera Function Image sensor 1/5-inch CMOS with primary color filter Number of recorded 2560 × 1920 pixels Direct print function This function allows you to send images from your smartphone to the camera for instax printing. You can use the smartphone app to move, rotate, and zoom the image before sending it.
WW_EN Printable image format JPEG images taken with this unit Print output time Approximately 16 seconds * Plus 7 seconds when printed using instax-Rich Mode immediately after startup. Print function Images in the internal memory and images in the memory card can be printed Reprint Reprint is possible for images stored in print history (up to 50) ■■Other Troubleshooting Please check the following items before considering a problem to be a malfunction.
Problem Possible causes and solutions The image is blurred. • If the lens has dirt on it such as fingerprints, clean the lens. • Make sure that the AF frame is green before taking a photo. The camera does not work properly. • There may be a temporary malfunction. Please press the reset button. If it still does not work properly, please contact our repair service center for repair. • The battery may be exhausted. Please charge the camera. The film pack does not load or does not load smoothly.
WW_EN The “UKCA” mark certifies that this product satisfies the requirements of Great Britain (England, Scotland, Wales) regarding safety, public health, environment and consumer protection. *UKCA: UK Conformity Assessed. battery will hold a charge indicates that it has reached the end of its service life. ■■ Caution: Handling the Battery The battery and camera body may become warm to the touch after extended use. This is normal. ■■ Certification marks are located inside the film chamber.
■■ Cautions on Handling the Film and Prints For details, refer to the instructions and warnings on the packaging of the FUJIFILM Instant Film “instax mini”. 28 Bluetooth® Devices: Cautions IMPORTANT: Read the following notices before using the product’s built-in Bluetooth transmitter. ■■ Use only as part of a Bluetooth network. FUJIFILM does not accept liability for damages resulting from unauthorized use.
WW_EN Information for traceability in Europe Manufacturer: FUJIFILM Corporation Address, City: 7-3, Akasaka 9-Chome, Minato-ku, Tokyo Country: JAPAN Authorized representative in Europe: FUJIFILM EUROPE GMBH Address, City: Dusseldorf Heesenstrasse 31, 40549 Country: Germany Authorized Representative in UK: FUJIFILM UK Limited St Martins Business Centre, St Martins Way, Bedford, MK42 0LF If you have any inquiries about this product, please contact a FUJIFILM authorized dealer, or access the website below.
