Digital Camera User Manual

Viewing Images on your PC

Install the supplied software “FinePixViewer” on your PC to view images on it. With “FinePixViewer”, you can transfer images

from your camera to your PC, manage image files and folders, and order online printing (only for Windows users) etc.

To run this software, you must have the hardware and software described below. Check your system before you begin the

installation.

MEMO

• When you install the software, login using a system administrator account (e.g. "Administrator")

• Internet connection is required to use the FinePix Internet Service. However, the software can still be installed even if you do not

have an Internet connection.

CAUTION

• Operation is not guaranteed on models with an additional USB interface board.

• Windows 95, Windows 98, and Windows NT are not supported.

• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.

• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use

an extension cable or connect the camera via a USB hub.

• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the

connection is faulty.

Windows Macintosh

Requirement Recommendation Requirement

OS Windows 98 SE or later Windows XP or later Mac OS X or later

CPU Pentium 200MHz minimum 2GHz Pentium 4 or better Power PC, Intel Processor

loaded

RAM 128MB minimum 512MB or better 256MB minimum

Hard disk space 1GB minimum 2GB or better 600MB minimum

Display 800 x 600 pixels or better, 16-bit

color or better

1024 x 768 pixels or better,

Highest (32bit)

800 x 600 pixels or better,

approx. 32,000 colors or better

External connection terminal Pre-installed USB port

L310GB.book Page 32 Thursday, January 17, 2008 9:44 PM