Digital Camera User Manual

41
Z Connecting
Z Others
Matters Problems Possible causes Solutions
Connecting to TV
There is no image
or sound on the
TV.
The camera is not connected to the TV
correctly.
Connect the camera and TV correctly.
The included A/V cable was connected
during movie playback.
After the movie playback mode is stopped,
connect the camera and TV correctly.
“TV” is selected as the TV input. Set the TV input to “VIDEO”.
The video output setting is incorrect. Change the setting to [NTSC] or [PAL].
The TV volume is turned down. Adjust the volume.
The TV image is
black and white.
The video output setting is incorrect. Change the setting to [NTSC] or [PAL].
Connecting to PC
PC does not
recognize the
camera.
The USB cable is not correctly connected
to the PC or camera.
Set up the camera, and connect the USB cable
correctly.
Connecting to
printer
Cannot print with
PictBridge.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
• Set up the camera, and connect the USB cable
correctly.
• Turn the printer on.
Matters Problems Possible causes Solutions
Camera operation
etc.
Nothing happens
when pressing the
buttons on the
camera.
Camera malfunction may be caused
temporarily.
Briefly remove the batteries or disconnect the AC
power adapter. Then reload the batteries or
reconnect the AC power adapter and try again.
The batteries have run out. Load new or fully charged batteries.
The camera no
longer works
correctly.
Camera malfunction may be caused
temporarily.
Briefly remove the batteries or disconnect the AC
power adapter. Then reload the batteries or
reconnect the AC power adapter and try again. If
you think the camera is faulty, contact your
FUJIFILM dealer.
L310GB.book Page 41 Thursday, January 17, 2008 9:44 PM