Owner's Manual

28
Setting
Setting
Description
Description
D
Sync
Control fl ash timing.
•
1ST CURTAIN: The fl ash fi res immediately after the shutter opens
(generally the best choice).
•
2ND CURTAIN: The fl ash fi res immediately before the shutter closes.
•
AUTO FP(HSS): High-speed sync (compatible units only). The camera
automatically engages front-curtain high-speed sync at shutter
speeds faster than the fl ash sync speed. Equivalent to 1ST CURTAIN
when MULTI is selected for fl ash control mode.
E
Zoom
The angle of illumination (fl ash coverage) for units that support fl ash
zoom. Some units allow the adjustment to be made from the cam-
era. If AUTO is selected, zoom will automatically be adjusted to match
coverage to lens focal length.
F
Lighting
If the unit supports this feature, choose from:
•
FLASH POWER PRIORITY: Gain range by slightly reducing coverage.
•
STANDARD: Match coverage to picture angle.
•
EVEN COVERAGE PRIORITY: Slightly increase coverage for more even
lighting.
G
LED light
Choose how the built-in LED light functions during still photography
(compatible units only): as a catchlight (CATCHLIGHT), as an AF-assist
illuminator (AF ASSIST), or as both a catchlight and an AF-ASSIST il-
luminator (AF ASSIST+CATCHLIGHT). Choose OFF to disable the LED
during photography.
G
Number of
 ashes
*
Choose the number of times the fl ash fi res each time the shutter is
released in MULTI mode.
H
Frequency
*
Choose the frequency at which the fl ash fi res in MULTI mode.
* Full value may not be applied if limits of fl ash control system are exceeded.