Owner's Manual

44
2
First Steps
Charging the Battery
Charging from a Computer or Portable Battery
The batteries also charge if the camera is connected to a computer or por-
table battery. Turn the camera o , insert the batteries, and connect a USB
cable.
USB connector (Type-C)
•
Battery status is shown by indicator lamp 2.
Indicator lamp
Indicator lamp
2
2
Battery status
Battery status
On Battery charging
Off Charging complete
Blinks Battery fault
•
Connect the camera directly to the computer; do not use a USB hub or
keyboard.
•
Charging stops if the computer enters sleep mode. To resume charging,
activate the computer and disconnect and reconnect the USB cable.
•
Charging may not be supported depending on the model of computer,
computer settings, and the computer’s current state.
•
Information on supported portable batteries is available on the Fuji lm
website.
O
If the camera is turned on during charging, charging will end and the
battery level will begin to gradually decline.
N
The camera will display an “external power
source” icon when powered via USB.