BL00004863-201 DIGITAL CAMERA X-Pro2 New Features Guide Version 2.00 Features added or changed as a result of firmware updates may no longer match the descriptions in the documentation supplied with this product. Visit our website for information on the updates available for different products: http://www.fujifilm.com/support/digital_cameras/software/fw_table.
Contents Please note the following changes and additions to the features described in the camera manual. Description X-Pro2 P Flash setup has changed. 78, 79 The content of the shooting menu F FLASH FUNCTION SETTING item FLASH SETTING 98 have changed. Editing the Quick Menu The items that can be assigned to the quick menu have changed. 49, 112 Assigning Roles to the The roles that can be assigned to the function buttons have changed.
Changes and Additions 3 Select FLASH FUNCTION Flash Photography FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING X-Pro2 Owner’s Manual: P 78, 79 Flash setup has changed. SETTING in the F FLASH SETTING menu. 1 Remove the hot shoe cover and slide the flash onto Q If the flash is not raised, settings will be adjusted for units connected via the sync terminal (EN-3). EXIT the hot shoe as shown, stopping when it clicks into place.
Changes and Additions Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. Flash Sync Speed The flash will synchronize with the shutter at shutter speeds of 1/250 s or slower. Optional Flash Units The camera can be used with optional FUJIFILM shoe-mounted flash units.
Changes and Additions SYNC TERMINAL The following options are available when a flash unit is connected via the sync terminal. SHOE MOUNT FLASH The following options are available with optional shoemounted flash units. ■ ■ MODE SYNC TERMINAL ADJUST MODE SHOE MOUNT FLASH ADJUST END A Flash control mode: Choose from the options below. END A Flash control mode: The flash control mode selected with the • M: A trigger signal is transmitted from the sync terminal and hot shoe when a picture is taken.
Changes and Additions C Flash mode (TTL): Choose a flash mode for TTL flash control. F Lighting: If the unit supports this feature, choose from the • FLASH AUTO: The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • STANDARD: The flash fires with every shot if possible; flash level is adjusted according to subject brightness.
Changes and Additions MASTER (OPTICAL) The options at right will be displayed if the unit is currently functioning as master flash for FUJIFILM optical wireless remote flash control. A Flash control mode (group A)/B Flash control mode (group B)/ C Flash control mode (group C): Choose flash control modes ■ MODE MASTER(OPTICAL) ADJUST for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode.
Changes and Additions G Flash mode (TTL): Choose a flash mode for TTL flash control. J Lighting: If the unit supports this feature, choose from the • FLASH AUTO: The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • STANDARD: The flash fires with every shot if possible; flash level is adjusted according to subject brightness.
Changes and Additions RED EYE REMOVAL Remove red-eye effects caused by the flash. Option FLASH + REMOVAL FLASH REMOVAL OFF Description A red-eye reduction pre-flash is combined with digital red-eye removal. Flash red-eye reduction only. Digital red-eye removal only. Flash red-eye reduction and digital red-eye removal off. R Flash red-eye reduction is not available in TTL flash control mode or while TTL lock is in effect.
Changes and Additions LED LIGHT SETTING Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos.
Changes and Additions Editing the Quick Menu Assigning Roles to the Function Buttons X-Pro2 Owner’s Manual: P 49, 112 The items that can be assigned to the quick menu have changed.
Changes and Additions Auto Power Save X-Pro2 Owner’s Manual: P 114 A AUTO POWER SAVE option has been added to the D POWER MANAGEMENT item in the setup menu. AUTO POWER SAVE A power-saving option has been added for the LCD/EVF displays. Option ON OFF EN-10 Description When HIGH PERFORMANCE or STANDARD is selected for D POWER MANAGEMENT > PERFORMANCE, the LCD and EVF will switch to a standard-quality display if no operations are performed for a set period.
Changes and Additions Corrected AF Frame X-Pro2 Owner’s Manual: P 94 The display when OFF is selected for G AF/MF SETTING > CORRECTED AF FRAME in the shooting menu has changed so that the active focus frame is displayed in green when the shutter button is pressed halfway.
Memo
Memo
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.com/products/digital_cameras/index.
