BL00004958-200 DIGITAL CAMERA X-Pro2 New Features Guide Version 4.00 Features added or changed as a result of firmware updates may no longer match the descriptions in the documentation supplied with this product. Visit our website for information on the updates available for different products: http://www.fujifilm.com/support/digital_cameras/software/fw_table.
Contents The following changes or additions have been made to features described in the X-Pro2 Version 3.10 owner’s manual. No. 1 2 3 4 5 6 7 8 Description X-Pro2 P To view separate RGB histograms and a display showing areas of the frame that will be overexposed at current settings superimposed on the view through the lens, press the function button to which 34 HISTOGRAM is assigned. During movie recording, you can press the shutter button halfway to refocus using autofocus.
Changes and Additions The DISP/BACK Button Recording Movies X-Pro2 (Version 3.10) Owner’s Manual: P 34 X-Pro2 (Version 3.10) Owner’s Manual: P 44 Histograms Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Shadows Highlights No. of pixels Pixel brightness Optimal exposure: Pixels are distributed in an even curve throughout the tone range. Overexposed: Pixels are clustered on the right side of the graph.
Changes and Additions Focus Mode X-Pro2 (Version 3.10) Owner’s Manual: P 65 Checking Focus To zoom in on the current focus area for precise focus, press the center of the rear command dial. Press the center of the rear command dial again to cancel zoom.
Changes and Additions B MOVIE SETTING X-Pro2 (Version 3.10) Owner’s Manual: P 104 MOVIE MODE Select a frame size and rate for movie recording. • U 2160/29.97 P: 3840 × 2160 (29.97 fps) • i 1080/59.94 P: 1920 × 1080 (59.94 fps) • U 2160/25 P: 3840 × 2160 (25 fps) • i 1080/50 P: 1920 × 1080 (50 fps) • U 2160/24 P: 3840 × 2160 (24 fps) • i 1080/29.97 P: 1920 × 1080 (29.97 fps) • U 2160/23.98 P: 3840 × 2160 (23.98 fps) • i 1080/25 P: 1920 × 1080 (25 fps) • i 1080/23.98 P: 1920 × 1080 (23.
Changes and Additions D CONNECTION SETTING X-Pro2 (Version 3.10) Owner’s Manual: P 124 WIRELESS SETTINGS Adjust settings for connection to wireless networks. Option Description Choose a name (NAME) to identify the camera on the wireless network (the camera is asGENERAL SETTINGS signed a unique name by default) or select RESET WIRELESS SETTINGS to restore default settings.
Changes and Additions PC CONNECTION MODE Adjust settings for connection to a computer. Option Description Connecting the camera to a computer via USB automatically enables data transfer mode, USB CARD READER allowing data to be copied to the computer. The camera functions normally when not connected. Connecting the camera to a computer via USB automatically enables tethered shooting mode.
Changes and Additions Accessories from FUJIFILM Using Shoe-Mounted Flash Units X-Pro2 (Version 3.10) Owner’s Manual: P 141 X-Pro2 (Version 3.10) Owner’s Manual: P 143 instax SHARE printers SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film. EN-6 Third-party studio flash commanders compatible with the FUJIFILM flash system can now be used. For more information, see the documentation provided your studio flash unit.
Memo
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.com/products/digital_cameras/index.
