FF200001 Owner’s Manual BL00005078-202 EN
Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information The latest versions of the manuals are available from: http://fujifilm-dsc.com/en/manual/ The site can be accessed not only from your computer but also from smartphones and tablets. It also contains information on the software license.
P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 27 3 Basic Photography and Playback 41 4 Movie Recording and Playback 47 5 Taking Photographs 55 6 The Shooting Menus 105 7 Playback and the Playback Menu 179 8 The Setup Menus 205 9 Shortcuts 241 10 Peripherals and Optional Accessories 257 11 Connections 275 12 Technical Notes 291 iii
Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 105 for details. Photo Menus N Items marked with both x and F icons are available in both the still photography and movie shooting menus. Changes to these items in either menu also apply to the item in the remaining menu.
Menu List P F FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING 148 148 149 149 150 150 B MOVIE SETTING MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC F IS MODE F IS MODE BOOST AUDIO SETTING MIC/REMOTE RELEASE 151 151 151 151 151 152 153 P v Menu List P A SHOOTING SETTING SCENE POSITION 137 FILTER SETTING 137 SPORTS FINDER MODE 138 138 PRE-SHOT sJ 1⁄3 SELF-TIMER 139 SAVE SELF-TIMER SETTING 139 SELF-TIMER LAMP 140 INTERVAL TIMER SHOOTING
Movie Menus N Items marked with both x and F icons are available in both the still photography and movie shooting menus. Changes to these items in either menu also apply to the item in the remaining menu.
Menu List P P AUDIO SETTING 167 167 167 168 168 169 169 170 170 170 170 171 173 INTERNAL MIC LEVEL ADJUSTMENT EXTERNAL MIC LEVEL ADJUSTMENT MIC JACK SETTING MIC LEVEL LIMITER WIND FILTER LOW CUT FILTER HEADPHONES VOLUME MIC/REMOTE RELEASE Q TIME CODE SETTING TIME CODE DISPLAY START TIME SETTING COUNT UP SETTING DROP FRAME HDMI TIME CODE OUTPUT P 174 174 175 175 175 175 175 176 P 177 177 177 178 178 vii Menu List G AF/MF SETTING F FOCUS AREA F FOCUS MODE F AF MODE F AF-C CUSTOM SETTING 1⁄2 xF AF ILL
The Playback Menu Adjust playback settings. N See page 185 for details.
Menu List Setup Menus Adjust basic camera settings. N See page 205 for details. D SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME P D SCREEN SETTING P VIEW MODE SETTING 213 206 EVF BRIGHTNESS 213 207 EVF COLOR 213 207 EVF COLOR ADJUSTMENT 214 208 1⁄3 LCD BRIGHTNESS 214 208 LCD COLOR 214 208 LCD COLOR ADJUSTMENT 214 209 IMAGE DISP. 215 209 AUTOROTATE DISPLAYS 215 210 PREVIEW EXP.
Menu List P D CONNECTION SETTING Menu List D BUTTON/DIAL SETTING FOCUS LEVER SETTING x EDIT/SAVE QUICK MENU F EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING 1⁄2 SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS SHOOT WITHOUT CARD FOCUS RING FOCUS RING OPERATION 2⁄2 AE/AF-LOCK MODE AWB-LOCK MODE TOUCH SCREEN SETTING 222 223 223 223 224 224 225 225 225 225 226 226 227 D POWER MANAGEMENT AUTO POWER OFF PERFORMANCE BOOST SETTING 229 230 230 D SAVE DATA SETTING FRAME NO.
P Table of Contents Introduction ....................................................................................................ii For the Latest Information ................................................................................... ii Menu List .........................................................................................................iv Shooting Menus ........................................................................................................iv The Playback Menu ....
Touch Screen Mode ................................................................................... 21 Shooting Touch Controls ................................................................................... 21 Playback Touch Controls .................................................................................... 25 2 First Steps 27 3 Basic Photography and Playback 41 4 Movie Recording and Playback 47 5 Taking Photographs 55 Attaching the Strap ............................................
Table of Contents FILTER ............................................................................................................................. 66 Custom Modes ......................................................................................................... 67 The Command and Function Dials.............................................................. 69 Autofocus ...................................................................................................... 70 Focus Mode.............
COLOR CHROME FX BLUE............................................................................... 111 WHITE BALANCE................................................................................................... 111 DYNAMIC RANGE ................................................................................................. 115 D RANGE PRIORITY.............................................................................................. 116 TONE CURVE .................................................
Table of Contents SHOOTING SETTING (Still Photography) ..........................................137 SCENE POSITION .................................................................................................. 137 FILTER SETTING...................................................................................................... 137 SPORTS FINDER MODE ..................................................................................... 138 PRE-SHOT sJ ..................................................
MOVIE SETTING (Movie Recording) ...................................................154 SHOOTING MODE................................................................................................ 154 MOVIE MODE.......................................................................................................... 154 FILE FORMAT ........................................................................................................... 155 FULL HD HIGH SPEED REC ...........................................
Table of Contents F AF MODE ........................................................................................................... 167 F AF-C CUSTOM SETTING ............................................................................ 168 xF AF ILLUMINATOR .................................................................................... 168 F FACE/EYE DETECTION SETTING ........................................................... 169 F MF ASSIST ........................................................
CROP ............................................................................................................................ 190 RESIZE ......................................................................................................................... 191 PROTECT.................................................................................................................... 192 IMAGE ROTATE .......................................................................................................
Table of Contents SCREEN SETTING.......................................................................................213 VIEW MODE SETTING ........................................................................................ 213 EVF BRIGHTNESS................................................................................................... 213 EVF COLOR ............................................................................................................... 213 EVF COLOR ADJUSTMENT ............
AE/AF-LOCK MODE............................................................................................. 226 AWB-LOCK MODE ................................................................................................ 226 TOUCH SCREEN SETTING ................................................................................ 227 POWER MANAGEMENT ..........................................................................229 AUTO POWER OFF ....................................................................
Table of Contents 10Peripherals and Optional Accessories 257 11Connections 275 Lenses ...........................................................................................................258 Lens Parts .................................................................................................................. 258 Removing Lens Caps ......................................................................................... 259 Attaching Lens Hoods ..............................................
Table of Contents 12Technical Notes 291 Accessories from Fujifilm .......................................................................292 Software for Use with Your Camera ...................................................294 FUJIFILM Camera Remote .............................................................................. 294 FUJIFILM PC AutoSave ...................................................................................... 294 RAW FILE CONVERTER EX powered by SILKYPIX ...................
Supplied Accessories The following are included with the camera: • NP-W126S rechargeable battery • Body cap (comes attached to camera) • USB cable • Headphone adapter • Shoulder strap • Basic Manual O The battery is not charged at shipment. Charge the battery before use (P 33). N • If you purchased a lens kit, check that a lens is included. • The supplied headphone adapter converts USB Type-C connectors to ⌀3.5 mm headphone jacks.
About This Manual This manual contains instructions for your FUJIFILM X-S10 digital camera. Be sure you have read and understood its contents before proceeding. Symbols and Conventions The following symbols are used in this manual: O Information that should be read to prevent damage to the product. Additional information that may be helpful when using the N product. P Pages on which related information may be found. Menus and other text in the displays are shown in bold.
Before You Begin 1
Parts of the Camera The parts of the camera are listed below. 1 Before You Begin A t (movie recording) button.......................48 B Q (quick menu) button ...............................245 C ISO button ......................................................251 D Rear command dial ................................6, 183 E Mode dial .............................................. 4, 42, 48 F Hot shoe .........................................................265 G Microphone ................................
Parts of the Camera 1 Before You Begin Y I (drive) button....................................... 5, 88 i Battery-chamber cover latch ......................30 b (delete) button (playback mode) .........45 j Battery-chamber cover .................................30 Z a (playback) button ...................................44 k Cable channel cover for DC coupler .......292 a Diopter adjustment control ...........................9 l DISP (display)/BACK button ............... 16, 181 m MENU/OK button ..........
Camera Functions The Mode Dial To select a shooting mode, rotate the dial until the icon for the desired mode aligns with the index. 1 Before You Begin Mode Description P A AUTO (AUTO) The camera automatically optimizes 42 settings to the scene. B P (PROGRAM AE) Aperture and shutter speed can be ad57 justed using program shift. C S (SHUTTER PRIORITY AE) Select for full control over camera set- 58 tings, including aperture (M and A) 60 and/or shutter speed (M and S).
Camera Functions The Focus Stick (Focus Lever) Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus. 1 I (Drive) Button Pressing the I (drive) button displays drive-mode menu, where you can choose from the following the drive modes.
The Command Dials The rear and front command dials are used for the operations below. Front command dial Rear command dial 1 Before You Begin • Choose the desired combination of shutter speed and aper• Adjust exposure compensation. ture (program shift). • Choose a shutter speed. Shooting Adjust aperture. • • Choose a shutter speed. • Choose a scene. Select menu tabs or page Highlight menu items. Menus through menus. Adjust settings in the quick Q Menu Select items in the quick menu. menu.
Camera Functions The Fn (Function) Dial Rotate the function dial to quickly adjust settings for the assigned function during shooting. Mode FILTER (FILTER) P (PROGRAM AE) S (SHUTTER PRIORITY AE) A (APERTURE PRIORITY AE) M (MANUAL) AUTO (AUTO) SP (SCENE POSITION) F (MOVIE) C1/C2/C3/C4 (CUSTOM) Description Filter selection Film simulation N The role performed by the function dial can be chosen using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING (P 254).
The Indicator Lamp Camera status is shown by the indicator lamp. 1 Before You Begin Indicator lamp Glows green Blinks green Blinks green and orange Glows orange Blinks orange Blinks red Camera status Focus locked. Focus or slow shutter speed warning. Pictures can be taken. • Camera on: Recording pictures. Additional pictures can be taken. • Camera off: Uploading pictures to a smartphone or tablet. * Recording pictures. No additional pictures can be taken at this time.
Camera Functions The LCD Monitor You can adjust the angle of the LCD monitor when framing shots, but be careful not to trap your fingers or other objects. 1 Before You Begin O • Do not apply excessive force to the hinge when rotating the LCD monitor, as this could damage the hinge. • Be careful that the corners of the monitor do not contact the camera body, as this could leave marks.
Camera Displays This section lists the indicators that may be displayed during shooting. O For illustrative purposes, displays are shown with all indicators lit.
Camera Displays A Crop factor .....................................................138 B Focus check ............................................ 80, 132 C Depth-of-field preview...........................61, 80 D Location data download status.....239, 278 E Bluetooth ON/OFF.......................................234 F Image transfer status ........................234, 278 G Movie mode ........................................... 48, 154 H Full HD high-speed recording ..................
The LCD Monitor H A BC D E I FG M J K L N O P Q 2 1 R Before You Begin 1 0 z S T U y x V W w X v u t s Y nm r q p o 12 lk j i h g f e d cbaZ
Camera Displays elapsed recording time ..............................48 L Number of available frames 1...................321 M Image size ......................................................106 N File format......................................................155 O Image quality................................................107 P Date and time..................................37, 39, 207 Q Touch screen mode .............................. 21, 135 R AWB lock .............................................
Adjusting Display Brightness The brightness and hue of the viewfinder and LCD monitor can be adjusted using the items in the D SCREEN SET-UP menu. Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfinder brightness or hue, LCD BRIGHTNESS or LCD COLOR to do the same for the LCD monitor. 1 Before You Begin Display Rotation When ON is selected for D SCREEN SET-UP > AUTOROTATE DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation.
Camera Displays PLAYBACK Option E EYE SENSOR Q EVF ONLY r LCD ONLY Description Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. Viewfinder on, LCD monitor off. LCD monitor on, viewfinder off. Before You Begin The Eye Sensor The eye sensor may respond to objects other than your eye or to light shining directly on the sensor.
The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor. N Indicators for the EVF and LCD must be selected separately. To choose the EVF display, place your eye to the viewfinder while using the DISP/BACK button.
Camera Displays Customizing the Standard Display To choose the items shown in the standard indicator display: Display standard indicators. Use the DISP/BACK button to display standard indicators. 2 Select DISP. CUSTOM SETTING. Select D SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect.
Camera Displays 1 Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. For a 3D display (shown), press the function button to which ELECTRONIC LEVEL is assigned (P 251). Pitch Roll Before You Begin Framing Outline Enable FRAMING OUTLINE to make the borders of the frame easier to see against dark backgrounds.
Using the Menus To display the menus, press MENU/OK.
Using the Menus Selecting a Menu Tab To navigate the menus: 1 Press MENU/OK to display the menus. 1 Before You Begin IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT 2 Press the focus stick (focus lever) left to highlight the tab for the current menu.
Touch Screen Mode The LCD monitor also functions as a touch screen. TOUCH SCREEN SETTINGS TOUCH SCREEN SETTING DOUBLE TAP SETTING ON TOUCH FUNCTION TOUCH SCREENOFF SETTING EVF TOUCH SCREEN AREA SETTINGS EVF The LCD monitor can be used to select the focus area while pictures are being framed in the electronic viewfinder (EVF). Use D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > EVF TOUCH SCREEN AREA SETTINGS to choose the area of the monitor employed for touch controls.
LCD Monitor The operation performed can be selected by tapping the touch screen mode indicator in the display. Touch controls can be used for the following operations: 1 Mode Description Before You Begin Tap your subject in the display to focus and release the shutter. TOUCH In burst mode, pictures will be taken while you keep your finger SHOOTING on the display. • If SINGLE AF is selected for focus mode, the camera will fo- AF AF OFF cus when you tap your subject in the display.
Touch Screen Mode N • Enabling movie-optimized controls disables the aperture ring. • When movie-optimized control is enabled, the movie-optimized mode button can be used to change shooting settings or disable movie-optimized control. 23 1 Before You Begin MOVIE OPTIMIZED CONTROL oL Selecting ON for B MOVIE SETTING > MOVIE OPTIMIZED CONTROL oL or tapping the movie-optimized mode button in the shooting display optimizes the command dials and touch controls for movie recording.
1 Before You Begin Touch Function Functions can be assigned to the following flick gestures in much the same way as function buttons (P 255): • Flick up: T-Fn1 • Flick left: T-Fn2 • Flick right: T-Fn3 • Flick down: T-Fn4 N • In some cases, touch-function flick ges- tures display a menu; tap to select the desired option. • Touch-function gestures are disabled by default. To enable touch-function gestures, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > c TOUCH FUNCTION.
Touch Screen Mode Playback Touch Controls When ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > a TOUCH SCREEN SETTING, touch controls can be used for the following playback operations: • Swipe: Swipe a finger across the display to view other images. 1 Before You Begin • Pinch-out: Place two fingers on the display and spread them apart to zoom in. • Pinch-in: Place two fingers on the display and slide them together to zoom out.
MEMO 26
First Steps 27
Attaching the Strap Attach the strap. Attach the strap to the two strap clips as shown below. 2 First Steps O To avoid dropping the camera, be sure the strap is correctly secured.
Attaching a Lens The camera can be used with lenses for the FUJIFILM X-mount. Remove the body cap from the camera and the rear cap from the lens. Place the lens on mount, keeping the marks on the lens and camera aligned (A), and then rotate the lens until it clicks into place (B). 2 not enter the camera. • Be careful not to touch the camera’s internal parts. • Rotate the lens until it clicks securely into place. • Do not press the lens release button while attaching the lens.
Inserting the Battery and a Memory Card Insert the battery and memory card as described below. 1 Slide the battery-chamber cover latch as shown and open the battery-chamber cover. 2 Insert the battery. Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the direction shown by the arrow. 3 Insert the memory card. 2 First Steps N The optional SD, SDHC, and SDXC memory cards the camera uses to store pictures are referred to as “memory cards”.
Inserting the Battery and a Memory Card Removing the Battery Before removing the battery or memory card, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. ments. Observe caution when removing the battery. Removing Memory Cards To remove the memory card, press it in and release it slowly. The card can then be removed by hand. O • Press the center of the card when ejecting it.
Inserting the Battery and a Memory Card 2 Compatible Memory Cards • The camera can be used with SD, SDHC, and SDXC memory cards. • The camera supports UHS-I memory cards. • To record movies, use cards with a UHS speed class of 3 or better or a video speed class of V30 or better. • A list of supported memory cards is available on the Fujifilm website. For details, visit: https://fujifilm-x.com/support/compatibility/cameras/.
Charging the Battery The battery is not charged at shipment. Charge the battery before use. O • An NP-W126S rechargeable battery is supplied with the camera. • Turn the camera off for charging. • The camera can be charged via USB. USB charging is available with computers with a manufacturer-approved operating system and USB interface. 2 First Steps Leave the computer on during charging. O • The battery will not charge while the camera is on. • Connect the supplied USB cable.
Charging the Battery Charge Status The indicator lamp shows battery charge status as follows: Indicator lamp On Off Blinks 2 Battery status Battery charging. Charging complete. Charging error. O • Do not affix labels or other objects to the battery. Failure to observe First Steps this precaution could make it impossible to remove the battery from the camera. • Do not short the battery terminals. The battery could overheat. • Read the cautions in “The Battery and Power Supply”.
Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Slide the switch to ON to turn the camera on, or to OFF to turn the camera off. O Fingerprints and other marks on the lens or viewfinder can affect picN • Pressing the a button during shooting starts playback. • Press the shutter button halfway to return to shooting mode. • The camera will turn off automatically if no operations are performed for the length of time selected for D POWER MANAGEMENT > AUTO POWER OFF.
Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: 2 First Steps Indicator e f g h i i (red) j (blinks red) 36 Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full. Low battery. Charge as soon as possible. Battery exhausted. Turn camera off and recharge battery.
Basic Setup When you turn the camera on for the first time, you can choose a language and set the camera clock. At default settings, you can also pair the camera with a smartphone or tablet so that you can later synchronize the clocks or download pictures. Follow the steps below when turning the camera on for the first time. N If you intend to pair the camera with a smartphone or tablet, install 1 Turn the camera on. A language-selection dialog will be displayed. 2 Choose a language.
4 Check the time. When pairing is complete, you will be prompted to set the camera clock to the time reported by the smartphone or tablet. Check that the time is correct. PAIRING REGISTRATION PAIRING COMPLETE 12/31/2020 12:10 AM SET DATE/TIME FROM SMARTPHONE? SET N 2 5 CANCEL To set the clock manually, press DISP/BACK (P 39). First Steps Synchronize the camera settings with the settings configured on your smartphone or tablet. SMARTPHONE SYNC.
Basic Setup Choosing a Different Language To change the language: 1 Display language options. Select D USER SETTING > Qa. 2 Choose a language. Highlight the desired option and press MENU/OK. Changing the Time and Date To set the camera clock: 2 First Steps 1 Display DATE/TIME options. Select D USER SETTING > DATE/TIME. 2 Set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change.
MEMO 40
Basic Photography and Playback 41
Taking Photographs This section explains basic photography. 1 Rotate the mode dial to AUTO to view the Y shooting display. The camera automatically selects a scene according to the type of subject detected. 3 Basic Photography and Playback O In Y (AUTO) mode, the camera continuously adjusts focus and searches for eyes, increasing the drain on the battery; in addition, the sound of the camera focusing may be audible. 2 Ready the camera.
Taking Photographs 3 Frame the picture. Lenses with Zoom Rings Use the zoom ring to frame the picture in the display. Rotate the ring left to zoom out, right to zoom in. A 4 Focus. Press the shutter button halfway to focus. 3 Focus frame • If the camera is able to focus, it will beep twice and focus frame and focus indicator will glow green. • If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the focus indicator will blink white.
Viewing Pictures Pictures can be viewed in the viewfinder or LCD monitor. To view pictures full frame, press a. 100-0001 3 Basic Photography and Playback Press the focus stick (focus lever) left to page through pictures in reverse order. Press it right to page through pictures in the order recorded. Keep the stick pressed to scroll rapidly to the desired frame. N • You can also page through pictures using the front command dial or swipe gestures.
Deleting Pictures Use the b (delete) button to delete pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. 1 With a picture displayed full frame, press the b button and select FRAME. ERASE FRAME SELECTED FRAMES ALL FRAMES 3 Choose a picture and press MENU/OK to delete it. • The picture will be deleted when the MENU/OK button is pressed; a confirmation dialog is not displayed.
MEMO 46
Movie Recording and Playback 47
Recording Movies Record movies with sound. Recording Movies Movies can be recorded by pressing the t (movie recording) button or rotating the mode dial to F (movie). The t (Movie Recording) Button Use the t (movie recording) button to quickly and easily record movies while in still photography mode. N The camera automatically selects CONTINUOUS AF for focus mode. 4 1 Press t to start recording. Movie Recording and Playback • A recording indicator (V) is dis- played while recording is in progress.
Recording Movies F (Movie) Mode For more control over camera settings, rotate the mode dial to F (movie) and record movies using the shutter button. Rotate the mode dial to F (movie). 2 Press the shutter button to start recording. • A recording indicator (V) is displayed while recording is in progress. • The display shows the elapsed recording time. 3 4 Press the shutter button again to end recording. Recording ends automatically when the movie reaches 29 minutes 59 seconds or the memory card is full.
O • Use a memory card with a UHS speed class of 3 or better when recording movies. • Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. • Note that the microphone may pick up lens noise and other sounds made by the camera during recording. • Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not indicate a malfunction.
Recording Movies Adjusting Movie Settings Movie settings can be adjusted from the movie menus or using the B MOVIE SETTING item in the photo menus (P 19). • Use the B MOVIE SETTING item in the photo menus to quickly adjust settings when recording movies via the t (movie recording) button (P 151). • The movie menus contain options for use when recording movies via the shutter button in F (movie) mode (P 154). O Changes made using the B MOVIE SETTING item in the photo menus also apply to the movie menus.
Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. Press the focus stick (focus lever) down to start movie playback. PLAY +1.
Viewing Movies Playback Speed Press the focus stick (focus lever) left or right to adjust playback speed during playback. Speed is shown by the number of arrows (M or N).
MEMO 54
Taking Photographs 55
Choosing a Shooting Mode Choose a shooting mode according to the scene or type of subject. Y (AUTO) When the mode dial is rotated to AUTO, the camera automatically optimizes settings to suit the scene. The display shows the icon for the mode most closely matching the type of scene detected by the camera.
Choosing a Shooting Mode Program AE (P) Let the camera choose shutter speed and aperture for optimal exposure. Other values that produce the same exposure can be selected with program shift. Rotate the mode dial to P. P will appear in the display. 5 Taking Photographs Program Shift Rotate the front command dial to choose the desired combination of shutter speed and aperture (program shift).
Shutter-Priority AE (S) Choose a shutter speed and let the camera adjust aperture for optimal exposure. 1 Rotate the mode dial to S. S will appear in the display. 5 Taking Photographs 2 Use the front command dial to choose a shutter speed. O • If the correct exposure cannot be achieved at the selected shutter speed, aperture will be displayed in red. • If the subject is outside the metering range of the camera, the aperture display will show “– – –”.
Choosing a Shooting Mode Time (T) Shutter speeds of 1 s or slower are referred to as “long time-exposures”. Use of a tripod is recommended to prevent the camera moving during the exposure. N • A count-down timer will be displayed while the exposure is in progress. • To reduce “noise” (mottling) in long time-exposures, select ON for H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting.
Aperture-Priority AE (A) Choose an aperture and let the camera adjust shutter speed for optimal exposure. 1 Rotate the mode dial to A. A will appear in the display. 5 Taking Photographs 2 Use the front command dial to choose an aperture. O • If the correct exposure cannot be achieved at the selected aperture, shutter speed will be displayed in red. • If the subject is outside the metering range of the camera, the shutter speed display will show “– – –”.
Choosing a Shooting Mode Previewing Depth of Field When PREVIEW DEPTH OF FIELD is assigned to a function button, pressing the button displays a L icon and stops aperture down to the selected setting, allowing depth of field to be previewed in the display (P 251).
Manual Exposure (M) Alter exposure from that selected by the camera. 1 Rotate the mode dial to M. M will appear in the display. 5 2 Taking Photographs Rotate the rear command dial to choose a shutter speed and the front command dial to choose the aperture. N The manual exposure display includes an exposure indicator that shows the amount the picture would be underor over-exposed at current settings.
Choosing a Shooting Mode Bulb (B) Choose a shutter speed of BULB for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the exposure. 1 Using the rear command dial, choose a shutter speed of BULB. 2 Press the shutter button all the way down. The shutter will remain open for up to 60 minutes while the shutter button is pressed; the display shows the time elapsed since the exposure started.
SP SCENE POSITION The camera offers a choice of “scenes”, each adapted to particular shooting conditions or a specific type of subject. 1 Rotate the mode dial to SP (SCENE POSITION). 2 Choose a scene via A SHOOTING SETTING > SCENE POSITION.
Choosing a Shooting Mode Choose from the following options: N The scene can also be selected in the shooting display via the front command dial. 65 5 Taking Photographs Scene Description Choose for portraits. h PORTRAIT Z PORTRAIT ENHANCER Processes portraits to give the subject a smooth, natural-looking complexion. Choose for daylight shots of buildings and landM LANDSCAPE scapes. Choose when photographing moving subjects. N SPORT Choose for poorly lit twilight or night scenes.
FILTER Take photos with filter effects. 1 Rotate the mode dial to FILTER. 2 Choose a filter via A SHOOTING SETTING > FILTER SETTING. Filter G TOY CAMERA H MINIATURE I POP COLOR J HIGH-KEY 5 Taking Photographs Z LOW-KEY K DYNAMIC TONE X SOFT FOCUS Description Choose for a retro toy camera effect. The tops and bottoms of pictures are blurred for a diorama effect. Create high-contrast images with saturated colors. Create bright, low-contrast images.
Choosing a Shooting Mode Custom Modes Rotate the mode dial to any of modes C1 (CUSTOM 1) through C4 (CUSTOM 4) to take pictures using previously-saved shooting menu settings. Settings can be saved or edited using H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING. Saving Settings 1 2 Select H IMAGE QUALITY SETTING in the shooting menu, then highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK. Highlight EDIT/CHECK SETTING and press MENU/OK.
4 Highlight an item you wish to store in the custom settings bank and press MENU/OK. Adjust settings for the selected item. CUSTOM 1 SHOOTING MODE SHUTTER SPEED APERTURE EXP. COMPENSATION DRIVE MODE EXIT 5 Press MENU/OK to save changes to the selected item and return to the menu item list. Adjust additional items as desired. 6 Pressing DISP/BACK in the menu item list displays a confirmation dialog. Highlight OK and press MENU/OK to save the settings to the selected bank.
Choosing a Shooting Mode The Command and Function Dials The roles of the command and Function dials vary with the mode.
Autofocus Take pictures using autofocus. 1 Use G AF/MF SETTING > FOCUS MODE to choose a focus mode (P 71). 2 Use G AF/MF SETTING > AF MODE to choose an AF mode (P 73). 3 Select G AF/MF SETTING > FOCUS AREA and choose the position and size of the focus frame (P 75). 4 Take pictures.
Autofocus Focus Mode Choose how the camera focuses. 1 2 Press MENU/OK to display the menus. 3 Choose from the following options: Select G AF/MF SETTING > FOCUS MODE in the shooting menu. Mode Description Focus manually using the lens focus ring. Choose for manp ual control of focus or in situations in which the camera is MANUAL FOCUS unable to focus using autofocus (P 79).
The Focus Indicator Focus status is shown by the focus indicator. Focus indicator Focus status ( ) Camera focusing. Subject in focus; focus locked (focus z (lights green) mode l). Subject in focus (focus mode k). (z) (lights green) Focus is automatically adjusted for Focus indicator changes in distance to subject. A (blinks white) Camera unable to focus. j Manual focus (focus mode p).
Autofocus Autofocus Options (AF Mode) Choose how the camera focuses in modes l and k. 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > AF MODE. Choose an AF mode. How the camera focuses depends on the focus mode. Focus Mode l (SINGLE AF) Option Description Sample image Camera focuses on subject in selected focus point. Use for pinSINGLE POINT point focus on selected subject. r z WIDE j ALL Taking Photographs y ZONE 5 Camera focuses on subject in selected focus zone.
Focus Mode k (CONTINUOUS AF) Option Description Sample image Focus tracks subject at selected focus point. Use for subjects moving SINGLE POINT toward or away from camera. r y ZONE z TRACKING 5 Taking Photographs j ALL 74 Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably. Focus tracks subjects moving through wide area of frame.
Autofocus Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 1 Press MENU/OK and go to the shooting menu. 2 Select G AF/MF SETTING > FOCUS AREA to view the focus-point display. 3 Use the focus stick (focus lever) and rear command dial to choose a focus area. N The focus point can also be selected using touch controls (P 21).
Selecting a Focus Point Use the focus stick (focus lever) to choose the focus point and the rear command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode.
Autofocus The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT AF mode y ZONE z WIDE/TRACKING 77 5 Taking Photographs Number of points avail- Choose from zones with Position focus frame over able can be selected using 7 × 7, 5 × 5, or 3 × 3 focus subject you want to track. G AF/MF SETTING > points. NUMBER OF FOCUS POINTS.
Autofocus Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object. • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur. • Insubstantial subjects, such as smoke or flame. • Subjects that show little contrast with the background.
Manual Focus Adjust focus manually. 1 Select MANUAL FOCUS for G AF/MF SETTING > FOCUS MODE. 2 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. A 3 Take pictures. N • Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the directhe lens is in manual focus mode. 79 Taking Photographs tion of rotation of the focus ring.
Checking Focus A variety of options are available for checking focus in manual focus mode. The Manual Focus Indicator The white line indicates the distance to the subject in the focus area (in meters or feet according to the option selected for D SCREEN SET-UP > FOCUS SCALE UNITS in the setup menu), the blue bar the depth of field, or in other words the distance in front of and behind the subject that appears to be in focus.
Manual Focus MF Assist Use G AF/MF SETTING > MF ASSIST to choose a focus check option. The following options are available: • DIGITAL SPLIT IMAGE: Displays a split image in the center of the frame. Frame the subject in the split-image area and rotate the focus ring until the four parts of the split image are correctly aligned. • DIGITAL MICROPRISM: A grid pattern that emphasizes blur is displayed when the subject is out of focus, disappearing to be replaced by a sharp image when the subject is in focus.
Exposure Compensation Adjust exposure. Rotate the rear command dial to adjust exposure. O • The amount of compensation available varies with the shooting mode. • Exposure compensation can be previewed in the shooting display, although the display may not accurately reflect its effects if: - the exposure compensation amount exceeds ±3 EV, - W 200% or X 400% is selected for DYNAMIC RANGE, or - STRONG or WEAK is selected for D RANGE PRIORITY.
Sensitivity Adjust the camera’s sensitivity to light. To view sensitivity settings, press the ISO button. Description Sensitivity is automatically adjusted in response to shooting conditions. Adjust sensitivity manually. Selected value is shown in display. Choose for special situations. Note that mottling may appear in pictures taken at H, while L reduces dynamic range. N • Sensitivity is not reset when the camera is turned off.
Sensitivity Auto Sensitivity (A) Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Item DEFAULT SENSITIVITY MAX. SENSITIVITY MIN.
Metering Choose how the camera meters exposure. A SHOOTING SETTING > PHOTOMETRY offers a choice of the following metering options: O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is OFF. Mode o MULTI p CENTER WEIGHTED v w AVERAGE The camera meters the entire frame but assigns the greatest weight to the area at the center. The camera meters lighting conditions in an area equivalent to 2% of the frame.
Focus/Exposure Lock Focus and exposure lock when the shutter button is pressed halfway. 1 Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). 2 Press the button all the way down. N Focus and exposure lock via the shutter button is only available when ON is selected for D BUTTON/DIAL SETTING > SHUTTER AF, SHUTTER AE.
Focus/Exposure Lock Other Controls Focus and exposure can also be locked using function buttons. At default settings, you can use the AEL button to lock exposure without locking focus. If the AFON button is assigned AF LOCK ONLY (P 251), it can similarly be used to lock focus without locking exposure. AEL button (exposure lock) • While the assigned control is pressed, pressing the shutter button halfway will not end the lock.
Bracketing Automatically vary settings over a series of pictures. 1 Press the I (drive) button to display drive-mode menu. 2 Press the focus stick (focus lever) up or down to highlight one of the following: Option W ISO BKT V WHITE BALANCE BKT 5 P 89 89 Option s Bracketing P 90 Taking Photographs 3 Press the focus stick left or right to highlight the desired bracketing settings. 4 5 Press MENU/OK to select. 88 Take pictures.
Bracketing W ISO BKT Select a bracketing amount (±1⁄3, ±2⁄3, or ±1) in the drive mode display. Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount. V WHITE BALANCE BKT Select a bracketing amount (±1, ±2, or ±3) in the drive mode display.
s Bracketing O AE BKT Use A SHOOTING SETTING > AE BKT SETTING to choose the bracketing amount, bracketing order, and number of shots. The camera will take the specified number of shots in sequence: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount. N Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.
Bracketing Z FOCUS BKT Each time the shutter button is pressed, the camera takes a series of photos, varying focus with each shot. The A SHOOTING SETTING > FOCUS BKT SETTING item offers a choice of MANUAL and AUTO bracketing. N • Do not adjust zoom during shooting. • Use of a tripod is recommended. MANUAL In MANUAL mode, you choose the following. Option FRAMES STEP INTERVAL Description Choose the number of shots. Choose the amount focus changes with each shot. Choose the interval between shots.
Bracketing AUTO In AUTO mode, the camera calculates FRAMES and STEP automatically. 1 Select A SHOOTING SETTING in the shooting menu, highlight FOCUS BKT SETTING, and press MENU/OK. 2 Select AUTO and choose an INTERVAL. The view through the lens will be displayed. 3 Focus on the nearest end of the subject and press MENU/OK. The selected focus distance appears as A on the focus distance indicator.
Continuous Shooting (Burst Mode) Capture motion in a series of pictures. 1 Press the I (drive) button to display drive-mode menu and select CH HIGH SPEED BURST or CL LOW SPEED BURST. 2 Choose the frame advance rate and press the shutter button to start shooting. Shooting ends when the shutter button is released or the memory card is full. O • Frame advance rates of 10 fps or faster are available only when Exposure To vary exposure with each shot, select OFF for D BUTTON/DIAL SETTING > SHUTTER AE.
HDR Each time the shutter button is pressed, the camera takes three shots, varying exposure each time, and combines them into a single picture. The resulting photograph preserves details in highlights and shadows. 1 Press the I (drive) button and select HDR in the drive-mode menu. 2 Choose the amount the brightnesses of the exposures vary. Option HDR AUTO 5 Taking Photographs HDR200 HDR400 HDR800 HDR800+ 3 94 Description Dynamic range is automatically set to a value of from 200% to 800%.
HDR O • Keep the camera steady. • The desired results may not be achieved in the subject moves or the composition or lighting changes during shooting. • The picture will be cropped a very small amount and the resolution will drop slightly. • Mottling may appear in pictures taken at higher values. Choose a value according to the scene. • “Extended” sensitivity values are not supported. • Depending on the options selected for HDR and sensitivity, pictures may not be taken at the selected shutter speed.
Panoramas Follow an on-screen guide to create a panorama. 1 Press the I (drive) button and select PANORAMA in the drive-mode menu. 2 To select the size of the angle through which you will pan the camera while shooting, press the focus stick (focus lever) left. Highlight a size and press MENU/OK. 3 Press the focus stick right to view a choice of pan directions. Highlight a pan direction and press MENU/OK. 4 Press the shutter button all the way down to start recording.
Panoramas For Best Results • Move the camera slowly in a small circle at a steady speed • Keep the camera parallel or at right angles to the horizon and be sure to pan only in the direction shown by the guides • Try panning at a different speed if the desired results are not achieved • Prop your elbows against your sides • Use a tripod • For best results, use a lens with a focal length of 35 mm or less (50 mm or less in 35 mm format).
Panoramas Viewing Panoramas With the panorama displayed full frame, press the focus stick (focus lever) down to start panorama playback. Vertical panoramas will scroll vertically, horizontal panoramas horizontally. PLAY STOP PAUSE • In full-frame playback, you can use the rear command dial to zoom panoramas in or out. • Panorama playback is controlled using the focus stick.
Multiple Exposures Create a photograph that combines multiple exposures. 1 Press the I (drive) button and select MULTIPLE EXPOSURE in the drivemode menu. 2 Choose a blend mode. Option AVERAGE BRIGHT DARK 3 Take the first shot. 99 5 Taking Photographs ADDITIVE Description The camera adds the exposures together. You may need to lower exposure compensation depending on the number of shots. The camera automatically optimizes exposure for the final picture.
Multiple Exposures 4 Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. NEXT RETRY EXIT N • To return to the previous step and retake the first shot, press the focus stick (focus lever) left. • To save the first shot and exit without creating a multiple exposure, press DISP/BACK. 5 Take the second shot, using the first frame as a guide. EXIT 5 6 Taking Photographs Press MENU/OK.
Flash Photography Use the built-in flash for additional lighting when shooting at night or indoors under low light. Slide the N lever as shown to raise the flash. 2 Select FLASH FUNCTION SETTING in the F FLASH SETTING menu. The camera will display options for the built-in flash.
3 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting (P 103). MODE Built-In Flash ADJUST 4 END Press DISP/BACK to put the changes into effect. O • Depending on the distance to the subject, some lenses may cast shadows in photos taken with the flash. • Be careful not to injure yourself on the edges of the raised flash. • The flash will not fire at some settings, for example in panorama mode or when the electronic shutter is used.
Flash Photography Flash Settings The following settings are available with the built-in flash. MODE Built-In Flash ADJUST END Setting 103 5 Taking Photographs Description Choose from the following options: • TTL: TTL mode. Adjust flash compensation (B) and choose a flash mode (C). • M: The flash fires at the selected output (B) regardless of subject brightness or camera settings. Output is expressed in fractions of full power, from ⁄ to ⁄.
Flash Photography Setting C Flash mode (TTL) 5 D Sync Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
The Shooting Menus 105
IMAGE QUALITY SETTING (Still Photography) Adjust image quality settings for still photography. To display image quality settings, press MENU/OK in the photo shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT N The options available vary with the shooting mode selected.
IMAGE QUALITY SETTING (Still Photography) IMAGE QUALITY Choose a file format and compression ratio. Option FINE Description Low compression ratios are used for higher-quality images. Higher compression ratios are used to increase the number of NORMAL images that can be stored. Record both RAW and fine-quality JPEG images. FINE + RAW NORMAL + RAW Record both RAW and normal-quality JPEG images. Record RAW images only.
RAW RECORDING Choose whether to compress RAW images. Option UNCOMPRESSED Description RAW images are not compressed. RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be viewed in Capture One Express Fujifilm (P 294), RAW FILE CONVERTER EX powered by LOSSLESS COMPRESSED SILKYPIX (P 294), FUJIFILM X RAW STUDIO (P 295), or other software that supports “lossless” RAW compression.
IMAGE QUALITY SETTING (Still Photography) Option Description Ideal for portrait with slightly enhanced contrast. h PRO Neg. Std Ideal for portrait with soft gradations and skin tones. g CLASSIC Neg. Enhanced color with hard tonality to increase image depth. Soft color and rich shadow tone suitable for film look movie. Unique color with low saturation and high contrast. Suitable for still and movie. Shoot in Black and White In rich details with sharpness.
MONOCHROMATIC COLOR Add a reddish or bluish tinge (warm or cool color cast) to the a ACROS and b MONOCHROME monochrome film simulations. Color can be adjusted on the WARM–COOL and G (Green)–M (Magenta) axes. MONOCHROMATIC COLOR SET GRAIN EFFECT Add a film grain effect. ROUGHNESS Option STRONG WEAK OFF Description Choose for rougher grains. Choose for smoother grains. Turn the effect off. SIZE 6 The Shooting Menus Option LARGE SMALL Description Choose for coarser grains. Choose for finer grains.
IMAGE QUALITY SETTING (Still Photography) COLOR CHROME FX BLUE Increase the range of tones available for rendering blues. Option STRONG WEAK OFF Description Choose for a strong effect. Choose for a weak effect. Turn the effect off. WHITE BALANCE For natural colors, choose a white balance option that matches the light source. Description White balance is adjusted automatically. Choose for whiter whites in scenes lit by incandescent bulbs. White balance is adjusted automatically.
N • In conditions in which AUTO fails to produce the desired results—for example, under certain types of lighting or in close-ups of portrait subjects—use custom white balance or choose a white balance option suited to the light source. • White balance is adjusted for flash lighting only in AUTO, WA WHITE PRIORITY, AA AMBIENCE PRIORITY, and g modes. Turn the flash off using other white balance options. • White balance options can also be accessed via shortcuts (P 242).
IMAGE QUALITY SETTING (Still Photography) Custom White Balance Choose k, l, or m to adjust white CUSTOM 1 balance for unusual lighting conditions using a white object as a reference (colored objects can also be used to lend photos a color cast).
k: Color Temperature Changing the color temperature changes overall hue. N Color temperature can be adjusted to make pictures “warmer” or “colder” or deliberately produce colors that differ radically from those in real life. 1 Select k in the white balance menu. The option currently selected for color temperature will be displayed. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET 2 Edit the color temperature using the focus stick (focus lever) and press MENU/OK. A fine-tuning dialog will be displayed.
IMAGE QUALITY SETTING (Still Photography) Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources with a color temperature close to that of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature are tinged with blue. DYNAMIC RANGE Control contrast.
D RANGE PRIORITY Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes. Option AUTO STRONG WEAK OFF Description Contrast is adjusted automatically in response to lighting conditions. Adjust dynamic range by a large amount for very high-contrast scenes. Adjust dynamic range by a smaller amount for moderately high-contrast scenes. Contrast reduction off.
IMAGE QUALITY SETTING (Still Photography) COLOR Adjust color density. Choose higher values to increase saturation, lower values to reduce it. −4 −3 −2 −1 Options 0 +1 +2 +3 +4 SHARPNESS Sharpen or soften outlines. Choose higher values for sharper outlines, lower values for softer outlines. −4 −3 −2 −1 Options 0 +1 +2 +3 +4 HIGH ISO NR Reduce noise in pictures taken at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to leave outlines visible.
CLARITY Increase definition while altering tones in highlights and shadows as little as possible. Choose higher values for increased definition, lower values for a softer effect. −5 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 O The additional processing required at settings other than 0 increases the time need to save each shot. N Clarity is adjusted automatically when the mode dial is rotated to AUTO or SP. LONG EXPOSURE NR Select ON to reduce mottling in long time-exposures.
IMAGE QUALITY SETTING (Still Photography) COLOR SPACE Choose the gamut of colors available for color reproduction. Option sRGB Adobe RGB Description Recommended in most situations. For commercial printing. PIXEL MAPPING Use this option if you notice bright spots in your pictures. 1 Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. 2 Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. O • Results are not guaranteed.
EDIT/SAVE CUSTOM SETTING Save custom camera settings for commonly-encountered situations. Saved settings can be recalled by rotating the mode dial to positions C1 (CUSTOM 1) through C4 (CUSTOM 4) (P 67). xF MOUNT ADAPTER SETTING Adjust settings for lenses attached via a mount adapter. The camera can store settings for multiple lenses (LENS 1 through LENS 6). N Any changes made using this item also apply in movie mode (P 166). Choosing a Focal Length Enter the lens’s true focal length.
IMAGE QUALITY SETTING (Still Photography) Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. To use color shading correction, follow the steps below. NEXT SET 1 Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle. 2 Use the focus stick (focus lever) to adjust shading until there is no visible difference in color between the selected corner and the center of the image.
AF/MF SETTING (Still Photography) Adjust focus settings for still photography. To display AF/MF settings, press MENU/OK in the photo shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA FOCUS MODE AF MODE AF-C CUSTOM SETTINGS STORE AF MODE BY ORIENTATION AF POINT DISPLAY NUMBER OF FOCUS POINTS PRE-AF EXIT N The options available vary with the shooting mode selected. FOCUS AREA Choose the focus area for autofocus, manual focus, and focus zoom (P 75).
AF/MF SETTING (Still Photography) AF-C CUSTOM SETTINGS Select focus-tracking options for CONTINUOUS AF focus mode. Choose from Sets 1 (SET 1) through 5 (SET 5) according to your subject or select SET 6 CUSTOM for custom focus-tracking options.
Focus Tracking Options The individual parameters that are part of a focus tracking set are described below. TRACKING SENSITIVITY This parameter determines how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. The higher the value, the longer the camera will wait.
AF/MF SETTING (Still Photography) ZONE AREA SWITCHING This parameter determines the focus area given priority in zone AF. ZONE AREA SWITCHING CENTER AUTO FRONT SETS THE SWITCHING SENSITIVITY OF FOCUS FRAME IN ZONE AREA ADJUST Option FRONT AUTO CENTER SWITCH Description Zone AF assigns priority to the subjects closest to the camera. The camera locks focus on the subject at the center of the zone and then switches focus areas as necessary to track it.
Custom Focus Tracking Options Follow the steps below to adjust settings for Set 6. 1 Select AF-C CUSTOM SETTINGS > SET 6 CUSTOM. AF-C CUSTOM SETTINGS SET 6 CUSTOM TRACKING SENSITIVITY SPEED TRACKING SENSITIVITY ZONE AREA SWITCHING ADJUST AUTO SET DETAIL RESET 2 Highlight items using the focus stick (focus lever) and rotate the front command dial to change. To reset settings to their original values, press b. 3 Press DISP/BACK when settings are complete.
AF/MF SETTING (Still Photography) STORE AF MODE BY ORIENTATION Choose whether the AF mode used when the camera is in portrait orientation is stored separately from that used when the camera is in landscape orientation. Option OFF FOCUS AREA ONLY ON Description The same settings are used in both orientations. The focus area for each orientation can be selected separately. The focus mode and focus area can be selected separately.
PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway. The camera adjusts focus continuously, allowing it to focus faster when the shutter button is pressed halfway. Choosing this option helps prevent missed shots. Options ON OFF O Choosing ON increases the drain on the battery. xF AF ILLUMINATOR If ON is selected, the AF-assist illuminator will light to assist autofocus.
AF/MF SETTING (Still Photography) FACE/EYE DETECTION SETTING If the camera detects human faces, it will assign them priority over the background and adjust settings appropriately for portraits when setting focus and exposure. You can also choose whether the camera focuses on the left or right eye when face detection is on. Option Description Adjust settings for Intelligent Face Detection. You can also adjust eye detection settings. • g EYE OFF: Intelligent Face Detection only.
N • The face selected by the camera is indicated by a green border. Any 6 The Shooting Menus other faces detected by the camera are indicated by gray borders. To have the camera focus on a different subject, tap inside the gray border. The g icon will change from white to green.
AF/MF SETTING (Still Photography) AF+MF If ON is selected in focus mode l and focus has been locked (whether by pressing the shutter button halfway or by other means), focus lock can be ended and focus adjusted manually by rotating the focus ring. Options ON OFF O • Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator.
MF ASSIST Choose how focus is displayed in manual focus mode. Option Description Focus is displayed normally (focus peaking, digital split image, and STANDARD digital microprism are not available). Displays a black-and-white (MONOCHROME) or color (COLOR) DIGITAL SPLIT split image in the center of the frame. Frame the subject in the IMAGE split-image area and rotate the focus ring until the four parts of the split image are correctly aligned.
AF/MF SETTING (Still Photography) INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE AF or CONTINUOUS AF is selected for FOCUS MODE. Options ON OFF xF INSTANT AF SETTING Chooses how the camera focuses when a button to which focus lock or AF-ON is assigned is pressed with MANUAL FOCUS selected for FOCUS MODE. Options AF-S N AF-C Any changes made using this item also apply in movie mode (P 170).
RELEASE/FOCUS PRIORITY Choose how the camera focuses when the shutter button is pressed all the way down with SINGLE AF or CONTINUOUS AF selected for FOCUS MODE. Option RELEASE FOCUS Description Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus. Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus. xF AF RANGE LIMITER Limit the range of available focus distances for increased focus speed.
AF/MF SETTING (Still Photography) xF TOUCH SCREEN MODE Choose the shooting operations performed using touch controls. Mode Description Tap your subject in the display to focus and release the shutter. TOUCH In burst mode, pictures will be taken while you keep your finger SHOOTING on the display. • In focus mode S (AF-S), the camera focuses when you tap your AF AF OFF subject in the display. Focus locks at the current distance until you tap the AF OFF icon.
AF/MF SETTING (Still Photography) Touch Controls for Focus Zoom Different touch controls are used during focus zoom (focus check enabled). Central Area Tapping the center of the display performs the operations below.
SHOOTING SETTING (Still Photography) Adjust shooting options for still photography. To display shooting settings, press MENU/OK in the photo shooting display and select the A (SHOOTING SETTING) tab. SHOOTING SETTING SCENE POSITION FILTER SETTING SPORTS FINDER MODE PRE-SHOT SELF-TIMER SAVE SELF-TIMER SETTING SELF-TIMER LAMP INTERVAL TIMER SHOOTING EXIT SCENE POSITION Choose a scene for SP mode (P 64). FILTER SETTING Choose the filter used when the mode dial is rotated to FILTER (P 66).
SPORTS FINDER MODE Take pictures using the crop in the center of the display. Choose this option for pictures of athletes, birds, and other moving subjects. Option ON OFF Description Pictures are taken using a 1.25× crop, reducing the picture angle by an amount equivalent to increasing lens focal length by 1.25×; the crop is shown by a frame in the display. The 1.25× crop is disabled. N • The H IMAGE QUALITY SETTING > IMAGE SIZE item in the shooting menu is fixed at P.
SHOOTING SETTING (Still Photography) SELF-TIMER Choose a shutter release delay. Option Description The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter R 2 SEC button is pressed. The self-timer lamp blinks as the timer counts down. The shutter is released ten seconds after the shutter button is pressed. S 10 SEC Use for photographs in which you wish to appear yourself.
SELF-TIMER LAMP If ON is selected, the self-timer lamp will light during self-timer photography. Select OFF when shooting night scenes or in other situations in which you would prefer that the lamp remain unlit. Options ON OFF INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. 1 Select A SHOOTING SETTING in the shooting menu, highlight INTERVAL TIMER SHOOTING, and press MENU/OK. 2 Use the focus stick (focus lever) to choose the interval and number of shots.
SHOOTING SETTING (Still Photography) O Interval timer photography cannot be used at a shutter speed of B (bulb) or with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N • Use of a tripod is recommended. • Check the battery level before starting. We recommend using USB power source (P 238). • The display turns off between shots and lights a few seconds before the next shot is taken.
AE BKT SETTING Adjust exposure bracketing settings. Option Description Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot. FRAMES: Choose the number of shots in the bracketing • FRAMES/STEP SETTING sequence. • STEP: Choose the amount exposure is varied with each shot. • 1 FRAME: The shots in the bracketing sequence are taken one at a time. 1 FRAME/CONTINUOUS • CONTINUOUS: The shots in the bracketing sequence are taken in a single burst.
SHOOTING SETTING (Still Photography) FOCUS BKT SETTING Choose from AUTO and MANUAL focus bracketing modes (P 91). PHOTOMETRY Choose how the camera meters exposure (P 85).
SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option t MECHANICAL SHUTTER s ELECTRONIC SHUTTER Description Take pictures with the mechanical shutter. Take pictures with the electronic shutter. The camera chooses the mechanical or electronic u MECHANICAL + ELECTRONIC shutter according to shooting conditions. O When using the electronic shutter, note the following: • Distortion may be visible in shots of moving subjects.
SHOOTING SETTING (Still Photography) FLICKER REDUCTION Reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources. Option ALL FRAMES FIRST FRAME OFF Description Flicker reduction is performed for all frames. Compared to when flicker reduction is performed only on the first frame, the frame advance rate for burst photography will drop.
IS MODE Reduce blur caused by camera shake or subject motion. Option Description L CONTINUOUS Image stabilization on. If + MOTION is selected, the camera + MOTION will adjust shutter speed to reduce motion blur when movl CONTINUOUS ing objects are detected. M SHOOTING As above, except that image stabilization is performed only when the shutter button is pressed halfway (focus mode + MOTION k only) or the shutter is released.
SHOOTING SETTING (Still Photography) xF WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera N For downloads and other information, visit: http://app.fujifilm-dsc.
FLASH SETTING (Still Photography) Adjust flash-related settings for still photography. To display flash settings, press MENU/OK in the photo shooting display and select the F (FLASH SETTING) tab. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING EXIT FLASH FUNCTION SETTING Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash.
FLASH SETTING (Still Photography) TTL-LOCK MODE Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs. Option Description Flash output is locked at the value metered for the most LOCK WITH LAST FLASH recent photo. LOCK WITH METERING The camera emits a series of pre-flashes and locks flash FLASH output at the metered value.
FLASH SETTING (Still Photography) COMMANDER SETTING Choose groups when using the camera flash unit as a commander for Fujifilm optical wireless remote flash control. This option is available when the camera is used with clip-on flash units that support Fujifilm optical wireless flash control. Options Gr A Gr B Gr C OFF N In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu. CH SETTING Choose the channel used for communication between the commander and remote flash units.
MOVIE SETTING (Still Photography) Adjust options for movies shot during still photography using the t (movie recording) button. To display movie settings, press MENU/OK in the photo shooting display and select the B (MOVIE SETTING) tab. N The options available vary with the shooting mode selected. MOVIE SETTING MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC F IS MODE F IS MODE BOOST AUDIO SETTING MIC/REMOTE RELEASE EXIT MOVIE MODE This item is also found in the movie menus (P 154).
AUDIO SETTING Adjust audio-related settings for movie recording. INTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in microphone. Option AUTO MANUAL OFF Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Turn the built-in microphone off. EXTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for external microphones.
MOVIE SETTING (Still Photography) WIND FILTER Choose whether to enable wind noise reduction during movie recording. Options ON OFF LOW CUT FILTER Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording. Options ON OFF HEADPHONES VOLUME Adjust the headphone volume. Option 0 1—10 Description Mute output to the headphones. Choose a volume of from 1 to 10.
MOVIE SETTING (Movie Recording) Adjust options for movies shot with the mode dial rotated to F (movie). To display options for movie recording, press MENU/OK in the movie shooting display and select the B (MOVIE SETTING) tab. N The options available vary with the shoot- MOVIE SETTING SHOOTING MODE MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC FIX MOVIE CROP MAGNIFICATION F-Log RECORDING 4K MOVIE OUTPUT FULL HD MOVIE OUTPUT EXIT ing mode selected. SHOOTING MODE Choose a shooting mode for movies.
MOVIE SETTING (Movie Recording) 2 Press the focus stick (focus lever) up or down to highlight the desired frame size and aspect ratio (A) and press the stick right. • Choose V16 : 9 or d17 : 9 for 4K movies with aspect ratios of 16 or 17 to 9. • Choose W16 : 9 or W17 : 9 for Full HD movies with aspect ratios of 16 or 17 to 9. 3 Press the focus stick (focus lever) up or down to highlight a frame rate (B) and press the stick right. 23.98P 4 24P 25P Options 29.97P 50P 59.
FULL HD HIGH SPEED REC Record high-frame-rate Full HD movies. High-frame-rate movies can be played back in slow motion, giving you time to view fast-moving subjects or details too fleeting for the naked eye. Select ON to choose the recording and playback rates separately. Playback 23.98P 24P Options 25P 29.97P 50P 59.94P Recording Options 100P 120P 200P 240P N • High-speed movies are recorded with no sound. • Maximum recording length is 6 minutes, but varies with camera settings.
MOVIE SETTING (Movie Recording) FIX MOVIE CROP MAGNIFICATION C Fix the movie crop ratio at 1.29∶1. This makes it easier to match crops when filming in different formats. Options ON OFF F-Log RECORDING Select ON to record movies using a soft gamma curve with a wide gamut suitable for further processing post-production. Sensitivity is restricted to values between ISO 640 and 12800.
4K MOVIE OUTPUT Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K. Option b 4K Y 4K b 4K Y FHD b FHD Y 4K b − Y 4K Description 4K movies are recorded to the camera memory card and output to the HDMI device in 4K. 4K movies are recorded to a camera memory card in 4K and output to the HDMI device in Full HD. 4K movies are output to the HDMI device in 4K and recorded to the camera memory card in Full HD.
MOVIE SETTING (Movie Recording) HDMI OUTPUT INFO DISPLAY If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display. Options ON OFF 4K HDMI STANDBY QUALITY Choose whether output to connected HDMI devices switches from 4K to Full HD during standby. Option V W Description Output to HDMI devices continues at 4K during standby. Output to HDMI devices switches to Full HD during standby, reducing the drain on the battery.
F IS MODE Reduce blur. Option IBIS/OIS IBIS/OIS + DIS OFF Description Enable in-body (IBIS) and optical (OIS) image stabilization. IBIS is used with lenses that do not support OIS. Enable in-body (IBIS), optical (OIS), and digital (DIS) image stabilization. The crop is adjusted according to the option selected for MOVIE MODE. Image stabilization off ; x appears in the display. Choose when the camera is mounted on a tripod or otherwise fixed in place.
MOVIE SETTING (Movie Recording) F ISO Adjust the camera’s sensitivity to light. Option H (25600) 160–12800 AUTO Description Choose for special situations. Note that dynamic range may be reduced and that pictures may be mottled. Adjust sensitivity manually. Selected value is shown in display. Sensitivity is automatically adjusted in response to shooting conditions. ZEBRA SETTING Highlights that may be overexposed are shown by zebra stripes in the movie mode display.
MOVIE SETTING (Movie Recording) TALLY LIGHT Choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady. Indicator lamp 6 The Shooting Menus Option FRONT OFF REAR z FRONT OFF REAR y FRONT z REAR z FRONT z REAR OFF FRONT y REAR y FRONT y REAR OFF FRONT OFF REAR OFF AF-assist illuminator Description The indicator lamp lights during movie recording. The indicator lamp blinks during movie recording.
IMAGE QUALITY SETTING (Movie Recording) Adjust image quality settings for movies. To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING FILM SIMULATION MONOCHROMATIC COLOR WHITE BALANCE DYNAMIC RANGE TONE CURVE COLOR SHARPNESS HIGH ISO NR EXIT N The options available vary with the shooting mode selected.
F DYNAMIC RANGE Choose a dynamic range for movie recording. Option V100% W200% X400% Description See “DYNAMIC RANGE” (P 115). N • AUTO (automatic dynamic range control) is not available during movie recording. • W200% is available at sensitivities of from ISO 320 to ISO 12800, X400% at sensitivities of from ISO 640 to 12800. • The B MOVIE SETTING > F DYNAMIC RANGE option is available when OFF is selected for B MOVIE SETTING > F-Log RECORDING.
IMAGE QUALITY SETTING (Movie Recording) F SHARPNESS Options are the same as those for still photography, but settings must be adjusted separately (P 117). F HIGH ISO NR Options are the same as those for still photography, but settings must be adjusted separately (P 117). V INTERFRAME NR Select ON to enable interframe noise reduction. Options ON OFF N • Interframe noise reduction is available only when frame rates of 29.97P or slower are selected at a frame size of V or d.
IMAGE QUALITY SETTING (Movie Recording) F PERIPHERAL LIGHT CORRECTION Select ON to enable peripheral illumination correction during movie recording. Options ON OFF N • If ON is selected when a lens that does not transmit data to the camera is attached using a FUJIFILM M MOUNT ADAPTER (available separately), peripheral illumination will be adjusted according to the option selected for H IMAGE QUALITY SETTING > xF MOUNT ADAPTER SETTING > PERIPHERAL ILLUMINATION CORRECTION in the shooting menu (P 121).
AF/MF SETTING (Movie Recording) Adjust focus settings for movies. To display AF/MF settings, press MENU/OK in the movie shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA FOCUS MODE AF MODE AF-C CUSTOM SETTING AF ILLUMINATOR FACE/EYE DETECTION SETTING MF ASSIST FOCUS CHECK EXIT N The options available vary with the shooting mode selected. F FOCUS AREA Options are the same as those for still photography, but settings must be adjusted separately (P 122).
F AF-C CUSTOM SETTING Select focus-tracking options when recording movies with CONTINUOUS AF selected for F FOCUS MODE. TRACKING SENSITIVITY Choose how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. See “TRACKING SENSITIVITY” (P 124). 0 Options 2 1 3 4 O • The higher the value, the longer it takes the camera to refocus when you attempt to switch subjects.
AF/MF SETTING (Movie Recording) F FACE/EYE DETECTION SETTING Enable or disable Intelligent Face Detection when recording movies. Option FACE DETECTION ON OFF Description See “FACE/EYE DETECTION SETTING” (P 129). Intelligent Face Detection and eye priority off. O If SINGLE AF is chosen for FOCUS MODE when FACE DETECTION ON is selected for G AF/MF SETTING > FACE/EYE DETECTION SETTING, the camera will automatically switch to CONTINUOUS AF.
F FOCUS CHECK Options are the same as those for still photography, but settings must be adjusted separately (P 132). xF INSTANT AF SETTING This item is also found in the photo menus (P 133). Changes to one apply to the other. xF DEPTH-OF-FIELD SCALE This item is also found in the photo menus (P 133). Changes to one apply to the other. xF AF RANGE LIMITER This item is also found in the photo menus (P 134). Changes to one apply to the other.
AF/MF SETTING (Movie Recording) xF TOUCH SCREEN MODE Choose the shooting operations performed using touch controls. Mode OFF Touch controls disabled. 171 6 The Shooting Menus Description Instead of pressing the shutter button, you can tap your subject in the display to focus and start recording. During recording, you TOUCH SHOOTING can tap the display to focus as described below. To end recording, press the shutter button. Tapping the display focuses the camera on the selected point.
N • To disable touch controls and hide the touch screen mode indica- tor, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. • This item is also found in the photo menus (P 135). Changes to one apply to the other. Touch Controls for Focus Zoom Different touch controls are used during focus zoom (focus check enabled). Central Area Tapping the center of the display performs the operations below.
AF/MF SETTING (Movie Recording) FOCUS CHECK LOCK Choose whether focus zoom remains in effect once movie recording begins.
AUDIO SETTING (Movie Recording) Adjust settings for audio recorded during filming. To display audio settings, press MENU/OK in the movie shooting display and select the P (AUDIO SETTING) tab. AUDIO SETTING INTERNAL MIC LEVEL ADJUSTMENT EXTERNAL MIC LEVEL ADJUSTMENT MIC JACK SETTING MIC LEVEL LIMITER WIND FILTER LOW CUT FILTER HEADPHONES VOLUME MIC/REMOTE RELEASE EXIT INTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in microphone.
AUDIO SETTING (Movie Recording) MIC JACK SETTING Specify the type of hardware connected to the microphone jack. Option MIC LINE Description Choose this option for direct connection to an external microphone. Choose this option for external audio devices connected via line output. MIC LEVEL LIMITER Reduces distortion caused by input that exceeds the limits of the microphone’s audio circuits. Options ON OFF WIND FILTER Choose whether to enable wind noise reduction during movie recording.
AUDIO SETTING (Movie Recording) MIC/REMOTE RELEASE Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release.
TIME CODE SETTING (Movie Recording) Adjust time code (hour, minute, second, and frame number) display settings for movie recording. To display time code settings, press MENU/OK in the movie shooting display and select the Q (TIME CODE SETTING) tab. TIME CODE SETTING TIME CODE DISPLAY START TIME SETTING COUNT UP SETTING DROP FRAME HDMI TIME CODE OUTPUT EXIT TIME CODE DISPLAY Select ON to display time codes during movie recording and playback.
TIME CODE SETTING (Movie Recording) DROP FRAME At frame rates of 59.94P, and 29.97P, a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code. Option ON OFF Description The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time. Frames are not dropped.
Playback and the Playback Menu 179
The Playback Display This section lists the indicators that may be displayed during playback. O For illustrative purposes, displays are shown with all indicators lit. A B CD E F G H g Playback and the Playback Menu 7 f e d c I J b a Z Y K L X W V U T A Date and time..................................37, 39, 207 B Frame-number display C Face detection indicator ............................129 D Bluetooth ON/OFF.......................................234 E Image transfer order ....................
The Playback Display The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback.
The Playback Display Viewing Photo Information The photo information display changes each time the focus stick (focus lever) is pressed up. Basic data Playback and the Playback Menu 7 Info display 1 NEXT LENS FOCAL LENGTH COLOR SPACE LENS MODULATION OPT. S.S F 23.0mm F5.6 23.0mm sRGB ON ISO BACK Info display 3 NEXT Info display 2 Zooming in on the Focus Point Press the center of the focus stick (focus lever) to zoom in on the focus point. Press again to return to full-frame playback.
Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback.
Viewing Pictures Playback Zoom Rotate the rear command dial right to zoom in on the current picture, left to zoom out. To exit zoom, press DISP/BACK or MENU/OK. N • The maximum zoom ratio varies with the option selected for H IMAGE QUALITY SETTING > IMAGE SIZE. • Playback zoom is not available with cropped or resized copies saved at a size of a.
The Playback Menu Adjust playback settings. The playback menu is displayed when you press MENU/OK in playback mode. PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVAL VOICE MEMO SETTING EXIT Saving RAW Pictures in Another Format 1 2 3 Display a RAW picture. Highlight RAW CONVERSION in the playback menu. Press MENU/OK. A list of settings will be displayed. RAW CONVERSION REFLECT SHOOTING COND.
6 7 Press the focus stick up or down to highlight the desired option. 8 Press the Q button. A preview of the copy will be displayed. 9 Press MENU/OK. The copy will be saved. Press MENU/OK to select the highlighted option. The settings list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to adjust additional settings. Playback and the Playback Menu N RAW conversion options can also be displayed by pressing the Q button when a RAW pictures is displayed during playback.
The Playback Menu The settings that can be adjusted when converting pictures from RAW to another format are: Setting O Some settings may be unavailable depending on the options chosen when the picture was taken. 187 Playback and the Playback Menu Description Create a copy using the settings in effect at the time REFLECT SHOOTING COND. the photo was taken. IMAGE SIZE Choose an image size. IMAGE QUALITY Adjust image quality. PUSH/PULL PROCESSING Adjust exposure.
ERASE Delete individual pictures, multiple selected pictures, or all pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. Option FRAME SELECTED FRAMES ALL FRAMES Description Delete pictures one at a time. Delete multiple selected pictures. Delete all unprotected pictures. Playback and the Playback Menu FRAME 1 Select FRAME for ERASE in the playback menu.
The Playback Menu SELECTED FRAMES 1 Select SELECTED FRAMES for ERASE in the playback menu. Highlight pictures and press MENU/OK to select. • Selected pictures are indicated by check marks (R). • To deselect a highlighted picture, press MENU/OK again. 3 When the operation is complete, press DISP/BACK to display a confirmation dialog. 4 Highlight OK and press MENU/OK to delete the selected pictures. N Pictures in photobooks or printer orders are shown by S.
CROP Create a cropped copy of the current picture. Playback and the Playback Menu 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Select CROP in the playback menu. Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed. Press MENU/OK again to save the cropped copy to a separate file.
The Playback Menu RESIZE Create a small copy of the current picture. 1 2 3 Display the desired picture. 4 Press MENU/OK again to save the resized copy to a separate file. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confirmation dialog. Playback and the Playback Menu N The sizes available vary with the size of the original image.
PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. Option FRAME SET ALL RESET ALL Description Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. Protect all pictures. Remove protection from all pictures. Playback and the Playback Menu O Protected pictures will be deleted when the memory card is formatted.
The Playback Menu IMAGE ROTATE Rotate pictures. 1 2 3 4 Select ON for D SCREEN SET-UP > AUTOROTATE PB. 5 Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera. Display the desired picture. Select IMAGE ROTATE in the playback menu. Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. tating pictures.
RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. 1 2 3 Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK. N • Results vary depending on the scene and the camera’s success in dePlayback and the Playback Menu tecting faces. • The amount of time needed to process the image varies with the number of faces detected.
The Playback Menu VOICE MEMO SETTING Add a voice memo to the current photograph. 1 2 3 Select ON for VOICE MEMO SETTING in the playback menu. Display a photo to which you wish to add a voice memo. Press and hold the AFON button to record a voice memo. Recording ends after 30 s or when you release the button. N • The new memo will be recorded over any existing memos. Playing Voice Memos Pictures with voice memos are indicated by q icons during playback. • To play the memo, press the AFON button.
RATING Rate pictures using stars. 1 2 Select RATING in the playback menu. Rotate the front command dial to choose a picture and the rear command dial to choose a rating of from 0 to 5 stars (“I”). N • The focus stick (focus lever) can be used in place of the front command dial to choose a picture. Playback and the Playback Menu • The rating dialog can also be displayed by pressing the AEL button in single-frame, nine-frame, or hundred-frame playback. • Use touch controls to zoom in or out.
The Playback Menu IMAGE TRANSFER ORDER Select photos for upload to a paired smartphone or tablet. 1 Select IMAGE TRANSFER ORDER > SELECT FRAMES in the playback menu. 2 Highlight photos and press MENU/OK to select or deselect. Repeat until all the desired photos have been selected. 3 Press DISP/BACK to exit to playback. N If ON is selected for both D CONNECTION SETTING > Bluetooth N • Image transfer orders can contain a maximum of 999 pictures.
xF WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera N For downloads and other information, visit: Playback and the Playback Menu http://app.fujifilm-dsc.
The Playback Menu PHOTOBOOK ASSIST Create books from your favorite photos. Creating a Photobook 1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. 2 Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the book is complete. for photobooks. • The first picture selected becomes the cover image. A different picture can be selected at any time.
Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures. Playback and the Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the onscreen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book.
The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. 1 2 Select C PLAY BACK MENU > PRINT ORDER (DPOF). 3 Display a picture you wish to include in or remove from the print order. 4 Press the focus stick (focus lever) up or down to choose the number of copies (up to 99). Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding.
instax PRINTER PRINT To print pictures to optional Fujifilm instax SHARE printers, first select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password, then follow the steps below. 1 2 Playback and the Playback Menu 7 Turn the printer on. Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer.
The Playback Menu DISP ASPECT Choose the aspect ratio used for the display of still pictures on High Definition (HD) devices (this option is available only when an HDMI cable is connected). Options 3:2 N Choose 16 : 9 to display photos with an aspect ratio of 16 : 9 full screen. The pictures will be displayed full screen with tops and bottoms cropped out.
MEMO 204
The Setup Menus 205
USER SETTING Adjust basic camera settings. To access basic camera settings, press MENU/OK, select the D (SET UP) tab, and choose USER SETTING. USER SETTING FORMAT DATE/TIME TIME DIFFERENCE a MY MENU SETTING MY MENU SETTING SENSOR CLEANING SOUND & FLASH EXIT FORMAT To format a memory card: 1 2 The Setup Menus 8 Select D USER SETTING > FORMAT in the D (SET UP) tab. A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK.
USER SETTING DATE/TIME To set the camera clock: 1 2 Select D USER SETTING > DATE/TIME in the D (SET UP) tab. 3 Press MENU/OK to set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the focus stick up or down.
Qa Choose a language. x MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used photo menu options (P 243). F MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used movie menu options (P 243).
USER SETTING SENSOR CLEANING Remove dust from the camera image sensor. Option OK Description Clean the sensor immediately. Sensor cleaning will be performed when the camera is WHEN SWITCHED ON turned on. Sensor cleaning will be performed when the camera turns WHEN SWITCHED OFF off (sensor cleaning is not however performed if the camera turns off in playback mode). N Dust that cannot be removed using sensor cleaning can be removed using a blower (P 306).
USER SETTING RESET Reset shooting or setup menu options to default values. 1 Highlight the desired option and press MENU/OK. Option Description Reset all photo menu settings other than custom white STILL MENU RESET balance and custom settings banks created using EDIT/ SAVE CUSTOM SETTING to default values. Reset all settings other than custom white balance opMOVIE MENU RESET tions selected using F WHITE BALANCE.
SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, select the D (SET UP) tab, and choose SOUND SET-UP. SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME EXIT AF BEEP VOL. Choose the volume of the beep that sounds when the camera focuses. The beep can be muted by selecting eOFF.
SOUND SETTING OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF to disable control sounds. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose eOFF to disable the shutter sound. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER SOUND Choose the sound made by the electronic shutter.
SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SET-UP. SCREEN SETTING VIEW MODE SETTING EVF BRIGHTNESS EVF COLOR EVF COLOR ADJUSTMENT LCD BRIGHTNESS LCD COLOR LCD COLOR ADJUSTMENT IMAGE DISP. EXIT VIEW MODE SETTING Adjust settings for eye sensor, EVF (electronic viewfinder), or LCD monitor view modes (P 14). EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder.
EVF COLOR ADJUSTMENT Adjust the color of the display in the electronic viewfinder. 1 Adjust colors using the focus stick (focus lever). EVF COLOR ADJUSTMENT SET 2 CANCEL Press MENU/OK. LCD BRIGHTNESS Adjust monitor brightness. −5 The Setup Menus 8 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 −1 Options 0 +1 +2 +3 +4 +5 LCD COLOR Adjust monitor hue. −5 −4 −3 −2 LCD COLOR ADJUSTMENT Adjust the color of the display in the LCD monitor.
SCREEN SETTING IMAGE DISP. Choose how long images are displayed after shooting. Option CONTINUOUS 1.5 SEC 0.5 SEC OFF Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the focus stick (focus lever); press again to cancel zoom. Pictures are displayed for the selected time or until the shutter button is pressed halfway. Pictures are not displayed after shooting.
PREVIEW EXP./WB IN MANUAL MODE Choose whether to enable exposure and/or white balance preview in manual exposure mode. Option Description PREVIEW EXP./WB Enable exposure and white balance preview. Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during PREVIEW WB shooting, as may be the case when you use a flash with an incandescent monitoring lamp. Disable exposure and white balance preview.
SCREEN SETTING F-Log VIEW ASSIST Select ON to display a tone-corrected preview (equivalent to BT.709) when recording or viewing F-log movies. Options ON OFF FRAMING GUIDELINE Choose a framing grid for shooting mode. F GRID 9 Display A six-by-four grid. H HD FRAMING Frame HD pictures in the crop shown by the lines at the top and bottom of the display. N Framing guides are not shown at default settings but can be displayed using D SCREEN SET-UP > DISP. CUSTOM SETTING (P 218).
AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON OFF FOCUS SCALE UNITS Choose the units used for the focus distance indicator. Options METERS The Setup Menus 8 FEET APERTURE UNIT FOR CINEMA LENS Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached.
SCREEN SETTING LARGE INDICATORS MODE(EVF) Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using D SCREEN SET-UP > LARGE INDICATORS DISP. SETTING. 5 4 3 2 1 0 -1 -2 -3 -4 -5 OFF ON O Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF) (P 11). N If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (P 251).
LARGE INDICATORS DISP. SETTING Choose the indicators displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD). Option A Expo. DISP. B d Scale C L1, L2, L3, L4 D R1, R2, R3, R4 The Setup Menus 8 LARGE INDICATORS DISP. SETTING 220 Scale Description Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press MENU/OK. Select ON to display the exposure indicator.
SCREEN SETTING x Q MENU BACKGROUND Choose the background color used for the quick menu when it is displayed during still photography. Options TRANSPARENT BLACK F Q MENU BACKGROUND Choose the background color used for the quick menu when it is displayed during movie recording.
BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING. BUTTON/DIAL SETTING FOCUS LEVER SETTING EDIT/SAVE QUICK MENU EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS SHOOT WITHOUT CARD EXIT FOCUS LEVER SETTING Choose the functions performed by pressing the center of the focus stick (focus lever) or by pressing the stick up, down, left, or right.
BUTTON/DIAL SETTING TILT o Option OFF DIRECT AF POINT SELECTION EDIT FOCUS AREA DIRECT AF POINT SELECTION/FACE SELECT Description Pressing the stick up, down, left, or right has no effect. Choose the focus area without leaving the shooting display. Press the stick up, down, left, or right to view a focus-area display and choose the focus area. Choose the focus area without leaving the shooting display.
SHUTTER AF Choose whether the camera focuses when the shutter button is pressed halfway. Option Description AF-S • ON: Focus locks when the shutter button is pressed halfway. • OFF: No focus operation is performed when the shutter button is pressed halfway. • ON: The camera focuses while the shutter button is pressed halfAF-C way. • OFF: No focus operation is performed when the shutter button is pressed halfway.
BUTTON/DIAL SETTING SHOOT WITHOUT LENS Choose ON to enable the shutter release when no lens is attached. Options ON OFF SHOOT WITHOUT CARD Choose whether the shutter can be released without a memory card inserted in the camera. Option Description When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.
AE/AF-LOCK MODE This option determines the behavior of the button to which exposure and/or focus lock is assigned. Option Description AE&AF ON WHEN Exposure and/or focus will lock while the button is pressed. PRESSING AE&AF ON/OFF Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again. SWITCH AWB-LOCK MODE Choose the behavior of function buttons assigned auto white balance (AWB) lock.
BUTTON/DIAL SETTING TOUCH SCREEN SETTING Enable or disable touch-screen controls. x TOUCH SCREEN SETTING Option ON OFF Description The LCD monitor functions as a touch screen during shooting. Touch controls disabled. x DOUBLE TAP SETTING Option ON OFF Description Tap the LCD monitor twice to zoom in on your subject during shooting. Touch zoom disabled. c TOUCH FUNCTION Description Enable touch-function gestures. Disable touch-function gestures.
BUTTON/DIAL SETTING EVF TOUCH SCREEN AREA SETTINGS Select the area of the LCD monitor used for touch controls while the viewfinder is active. The area used for touch controls can be selected from: Option 6 0 2 4 1 3 5 OFF The Setup Menus 8 228 Description All. Right half. Top right quarter. Bottom right quarter. Left half. Top left quarter. Bottom left quarter. Touch controls disabled.
POWER MANAGEMENT Adjust power management settings. To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT. POWER MANAGEMENT AUTO POWER OFF PERFORMANCE BOOST SETTING EXIT AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually.
POWER MANAGEMENT PERFORMANCE Select BOOST to improve focus and EVF display performance. Option BOOST NORMAL Description Boost camera focus and EVF display performance. The battery drains faster than when is NORMAL selected. Choose for standard focus and EVF display performance and battery endurance. BOOST SETTING Adjust the behavior of the EVF and LCD monitor when BOOST is selected for PERFORMANCE.
SAVE DATA SETTING Make changes to file management settings. To access file management settings, press MENU/OK, select the D (SET UP) tab, and choose SAVE DATA SET-UP. SAVE DATA SETTING FRAME NO. SAVE ORG IMAGE EDIT FILE NAME SELECT FOLDER COPYRIGHT INFO EXIT FRAME NO. Frame number New pictures are stored in image files named using a four-digit file number assigned by adding one to the last file number used. The File file number is displayed during playback as Directory number number shown. FRAME NO.
SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options ON OFF EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”) preceded by an underscore.
SAVE DATA SETTING SELECT FOLDER Create folders and choose the folder used to store subsequent pictures. Option SELECT FOLDER CREATE FOLDER Description To choose the folder in which subsequent pictures will be stored, press the focus stick (focus lever) up or down to highlight an existing folder and press MENU/OK. Enter a five-character folder name to create a new folder in which to store subsequent pictures.
CONNECTION SETTING Adjust settings for connection to other devices. To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING. CONNECTION SETTING Bluetooth SETTINGS PC AUTO SAVE PRINTER CONNECTION SETTING CONNECTION MODE USB POWER SUPPLY SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING EXIT N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ Bluetooth SETTINGS Adjust Bluetooth settings.
CONNECTION SETTING N • Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images. • When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER or images are currently selected for upload using the IMAGE TRANSFER ORDER option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off.
instax PRINTER CONNECTION SETTING Adjust settings for connection to optional Fujifilm instax SHARE printers. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
CONNECTION SETTING CONNECTION MODE Adjust settings for connection to external devices. Option N For information on compatible computer software, see “Software for Use with Your Camera” (P 294). The Setup Menus Description Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to USB CARD READER the computer. The camera functions normally when not connected.
USB POWER SUPPLY SETTING Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable. Option ON OFF Description The camera draws power from the connected device, reducing the drain on the camera battery. The camera does not draw power from the connected device. O The camera cannot draw power from Lightning connections or from devices that do not supply power. Select OFF before connecting the camera to such devices.
CONNECTION SETTING GENERAL SETTINGS Adjust settings for connection to wireless networks. Option Description Choose a name (NAME) to identify the camera on the wireless NAME network (the camera is assigned a unique name by default). Choose whether to resize images for upload to smartphones. RESIZE IMAGE FOR Resizing applies only to the copy uploaded to the smartphone; SMARTPHONE the original is not affected. H • ON: Larger images are resized to H for upload.
MEMO 240
Shortcuts 241
Shortcut Options Customize camera controls to suit your style or situation. Frequently-used options can be added to “my menu” or the Q menu or assigned to the function buttons, the function dial, or touch function button flick gestures for direct access: Shortcut Option Description Add frequently-used options to this custom menu, “My menu” which can be viewed by pressing MENU/OK and selecting the E (“MY MENU”) tab. The Q menu is displayed by pressing the Q button.
MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the shooting display and select the E (MY MENU) tab. MY MENU SELF-TIMER INTERVAL TIMER SHOOTING FILM SIMULATION GRAIN EFFECT PHOTOMETRY SHUTTER TYPE IS MODE FACE/EYE DETECTION SETTING EXIT O The E tab is only available if options have been assigned to E MY MENU.
MY MENU 3 Choose a position for the item and press MENU/OK. The item will be added to “my menu”. SELECT ITEM LOCATION 1 IMAGE SIZE 2 IMAGE QUALITY MOVE 4 5 SAVE Press MENU/OK to return to the edit display. Repeat Steps 3 and 4 until all the desired items have been added. N “My menu” can contain up to 16 items.
The Quick Menu Use the quick menu for quick access to selected options. To view the quick menu, press the Q button. The Quick Menu Display The quick menu offers different options in photo and movie modes.
Movie recording SHOOTING MODE SET A SHOOTING MODE B SHUTTER SPEED C MOVIE MODE RESOLUTION/ ASPECT RATIO D F WHITE BALANCE END Default E F FILM SIMULATION F F ISO G MOVIE MODE FRAME RATE H WHITE BALANCE COLOR TEMP. (WHEN k SELECTED) Shortcuts The quick menu shows the options currently selected for items B–H, which can be changed.
The Quick Menu Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 Use the focus stick (focus lever) to highlight items and rotate the rear command dial to change. FOCUS MODE SET END N When DISABLE is selected for H IMAGE QUALITY SETTING > 3 Press Q to exit when settings are complete. N • The quick menu can also be edited using touch controls.
Editing the Quick Menu To choose the items displayed in the quick menu: 1 Press and hold the Q button during shooting. N Whether the camera displays the photo or movie quick menu depends on the position of the mode dial. 2 The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK. 3 Highlight the item you wish to change and press MENU/OK. The following can be assigned to the quick menu.
The Quick Menu Available Items (Still Photography) Choose from: N To disable the function button, choose NONE. Shortcuts • IMAGE SIZE • TOUCH SCREEN MODE • IMAGE QUALITY • SELF-TIMER • FILM SIMULATION • PHOTOMETRY • GRAIN EFFECT • SHUTTER TYPE • COLOR CHROME EFFECT • FLICKER REDUCTION • COLOR CHROME FX BLUE • ISO • DYNAMIC RANGE • FLASH FUNCTION SETTING • D RANGE PRIORITY • FLASH COMPENSATION • WHITE BALANCE • MOVIE MODE RESOLUTION/ASPECT • WHITE BALANCE COLOR TEMP.
The Quick Menu Available Items (Movies) • FILM SIMULATION • DYNAMIC RANGE • WHITE BALANCE • WHITE BALANCE COLOR TEMP.
Function Controls Each of the function (Fn, t, ISO, Q, AEL, and AFON) buttons, the Fn (function) dial, and touch-function (T-Fn1, T-Fn2, T-Fn3, and T-Fn4) buttons flick gestures can be assigned its own role. The Function Buttons Assign roles to the function (Fn, t, ISO, Q, AEL, and AFON) buttons for quick access.
Assigning Roles to the Function Buttons The roles played by the function buttons can be selected using the D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING option in the setup menu.
Function Controls AF-ON Controls to which AF-ON is assigned can be used for autofocus. MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash). TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 149).
The Function Dial Rotate the Fn (function) dial for direct access to selected features. The role played by the function dial can be selected using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. Shortcuts 9 • EXPO. COMP.
Function Controls Touch-Function Gestures Assign roles to touch-function gestures (T-Fn1, T-Fn2, T-Fn3, or T-Fn4) for quick access to selected features. N Touch-function gestures are disabled by default. To enable touch-func- tion gestures, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > c TOUCH FUNCTION.
Function Controls Assigning Roles to Touch-Function Gestures The roles played by touch-function gestures can be selected using the D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING option in the setup menu.
Peripherals and Optional Accessories 257
Lenses The camera can be used with lenses for the FUJIFILM X-mount. Lens Parts Peripherals and Optional Accessories A Lens hood B Mounting marks C Focus ring D Zoom ring E Aperture ring F O.I.S. switch G Aperture mode switch H Lens signal contacts I Front lens cap J Rear lens cap N A XF18-55mmF2.8-4 R LM OIS lens is used here for illustrative purposes.
Lenses Removing Lens Caps Remove lens caps as shown. O Lens caps may differ from those shown. Peripherals and Optional Accessories Attaching Lens Hoods When attached, lens hoods reduce glare and protect the front lens element.
Lenses with Aperture Rings At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M). A 16 11 8 5.6 4 2.8 A 16 11 8 5.6 4 Aperture ring N • Selecting ON for MOVIE OPTIMIZED CONTROL oL disables the aperture ring. • When the aperture ring is set to A, rotate the command dials to adjust aperture. The Aperture Mode Switch If the lens has an aperture mode switch, aperture can be adjusted manually by sliding the switch to Z and rotating the aperture ring.
Lenses Lenses with O.I.S. Switches If the lens supports optical image stabilization (O.I.S.), the image stabilization mode can be chosen in the camera menus. To activate image stabilization, slide the O.I.S. switch to ON. O.I.S.
Manual Focus Lenses Slide the focus ring to the front for autofocus. For manual focus, slide the focus ring to the back and rotate it while checking the results in the camera display. The focus distance and depth-of-field indicators can be used to assist manual focus. O Note that manual focus may not be available in all shooting modes.
Lenses Lens Care • Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. • Replace the front and rear caps when the lens is not in use.
External Flash Units Use optional external flash units for flash photography. Some units support high-speed sync (FP) and can be used at shutter speeds faster than the flash sync speed, while others can function as commanders controlling remote units via optical wireless flash control. O You may be unable to test-fire the flash in some circumstances, for example when camera menus are displayed.
External Flash Units Using an External Flash 1 2 Connect the unit to the camera. In shooting mode, select FLASH FUNCTION SETTING in the F (FLASH SETTING) menu tab. The options available vary with the flash unit. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING EXIT 3 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting.
SYNC TERMINAL SYNC TERMINAL is displayed if the built-in flash is lowered and either no flash unit, or an incompatible flash unit, is mounted on the hot shoe. MODE SYNC TERMINAL ADJUST Setting END Peripherals and Optional Accessories Description Choose from the following options: • M: A trigger signal is transmitted via the hot shoe X contacts when a picture is taken.
External Flash Units SHOE MOUNT FLASH The following options are available when an optional shoe-mounted flash unit is attached and turned on. MODE SHOE MOUNT FLASH ADJUST END Setting Peripherals and Optional Accessories Description The flash control mode selected with the flash unit. This can in some cases be adjusted from the camera; the options available vary with the flash. • TTL: TTL mode. Adjust flash compensation (B).
Setting Peripherals and Optional Accessories Description The options available vary with flash control mode. • TTL: Adjust flash compensation (the full value may not be applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit. B Flash compensation/ • M/MULTI: Adjust flash output (compatible units only).
External Flash Units Setting D Sync E Zoom G LED light G Number of flashes * H Frequency * Peripherals and Optional Accessories F Lighting Description Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only).
COMMANDER(OPTICAL) The options will be displayed if the unit is currently functioning as a commander for Fujifilm optical wireless remote flash control. MODE COMMANDER(OPTICAL) ADJUST END Peripherals and Optional Accessories Fujifilm optical wireless remote flash control offers a choice of four channels (Channels 1 through 4) for the exchange of optical signals between the commander and remote flash units.
External Flash Units Setting A Flash control mode (group A) B Flash control mode (group B) C Flash control mode (group C) output (group A) E Flash compensation/ output (group B) F Flash compensation/ output (group C) Peripherals and Optional Accessories D Flash compensation/ Description Choose flash control modes for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group.
Setting G Flash mode (TTL) Peripherals and Optional Accessories H Sync I Zoom 10 J Lighting 272 Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
External Flash Units Setting K Commander K Number of flashes L Channel Peripherals and Optional Accessories L Frequency Description Choose the group for units functioning as a commander for Fujifilm optical wireless remote flash control in TTL, TTL%, or M mode. This option is available only with clipon flash units that support Fujifilm optical wireless remote flash control. • Gr A: Assign the commander to group A. • Gr B: Assign the commander to group B. • Gr C: Assign the commander to group C.
MEMO 274
Connections 275
HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below. Insert into HDMI connector Insert into HDMI Micro connector (Type D) Connections 11 3 Configure the device for HDMI input as described in the documentation supplied with the device. 4 Turn the camera on.
HDMI Output Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. N This feature can be used to save 4K and Full HD movies to an HDMI recorder. Playback To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume.
Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) Access wireless networks and connect to computers, smartphones, or tablets. For more information, visit: http://fujifilm-dsc.com/wifi/ N In the text that follows, the term “smartphone” is used to refer to both smartphones and tablets. Smartphones and Tablets: FUJIFILM Camera Remote Connect to the camera via Bluetooth or wireless LAN.
Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) SmartPhones and Tablets: Bluetooth® Pairing Use D CONNECTION SETTING > Bluetooth SETTINGS > PAIRING REGISTRATION to pair the camera with smartphones or tablets. Pairing offers a simple method for downloading photos from the camera. N • Photos are downloaded via a wireless connection. • Once pairing is complete, you will be able to synchronize the camera clock and location data with the smartphone or tablet (P 234).
Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) Copying Pictures to a Computer: PC AutoSave Install the latest version of FUJIFILM PC Autosave to your computer to upload pictures from the camera over wireless networks (Wi-Fi). FUJIFILM PC AutoSave For downloads and other information, visit: http://app.fujifilm-dsc.com/en/pc_autosave/ Computers: Wireless Connections You can upload pictures from the camera using the PC AUTO SAVE option in the playback menu.
Connecting via USB The camera can be connected to computers and smartphones via USB. Connecting to Computers N Before downloading pictures or taking pictures remotely, connect the camera to a computer and check that it functions normally. 1 2 Turn the computer on. 3 4 Turn the camera off. Adjust settings according to whether you will be copying pictures to a computer (P 284), save RAW pictures in other formats (P 285), or Saving and Loading Camera Settings (P 285). Connect a USB cable.
5 6 Turn the camera on. Copy pictures to your computer. • Image transfer: Use applications provided with your operating system. • RAW conversion: Process RAW images using FUJIFILM X RAW STUDIO. The power of the camera’s image processing engine is used for rapid processing. • Saving and loading camera settings: Use FUJIFILM X Acquire to save or load camera settings. Save your preferred settings to a file in a single operation and copy them to multiple cameras.
Connecting via USB O • Turn the camera off before disconnecting the USB cable. • When connecting USB cables, be sure the connectors are fully in- serted in the correct orientation. Connect the camera directly to the computer; do not use a USB hub or keyboard. • Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or fully-charged battery before connecting the camera.
Copying Pictures to a Computer • Before copying pictures to a computer, select USB CARD READER for D CONNECTION SETTING > CONNECTION MODE. • The software that can be used to copy pictures varies with your computer operating system. CONNECTION SETTING CARD READER BluetoothUSB SETTINGS WEBCAM PC AUTOXSAVE USB RAW CONV.
Connecting via USB Converting RAW Images: FUJIFILM X RAW STUDIO • Before proceeding, select USB RAW Bluetooth SETTINGS PC AUTO SAVE CONV./BACKUP RESTORE for D CONPRINTER CONNECTION SETTING CONNECTION MODE NECTION SETTING > CONNECTION USB POWER SUPPLY SETTING GENERAL SETTINGS MODE in the camera menus. INFORMATION RESET WIRELESS SETTING • FUJIFILM X RAW STUDIO can be used to convert RAW images to JPEG or TIFF images. CONNECTION SETTING USB CARD READER X WEBCAM USB RAW CONV.
Connecting to Smartphones To copy pictures to a smartphone, select OFF for D CONNECTION SETTING > USB POWER SUPPLY SETTING and connect the camera to the phone using a USB cable. For Customers Using Android Devices How you will connect the camera depends on the type of USB connector with which your smartphone is equipped. Type-C Ready a cable equipped with connectors matching the USB (Type-C) connector on the camera.
Connecting via USB 1 Set the camera’s D CONNECTION SETTING > USB POWER SUPPLY SETTING to OFF. 2 Connect the camera and smartphone using a USB cable. N If the smartphone asks for permission for an application other than the “Camera Importer” to access the camera, tap “Cancel” and move on to the next step. 3 On your smartphone, tap the notification “Connected to USB PTP”. 4 From the recommended applications, select “Camera Importer”.
Connecting via USB For Customers Using iOS An Apple Lightning to USB Camera Adapter is required. Supplied USB cable Type-C connector (male) Apple Lightning to USB Camera Adapter Use an Apple Lightning to USB Camera Adapter Type-A connector (male) 1 Set the camera’s D CONNECTION SETTING > USB POWER SUPPLY SETTING to OFF. 2 Connect the camera and smartphone using a USB cable. The “Photos” app will automatically start and allow you to import photos and movies to your smartphone.
instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING FUJIFILM-CAMERA-1234 CANCEL 3 Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. PRINTER PRINT 100-0020 SET instax-12345678 CANCEL N • Pictures taken with other cameras cannot be printed. • The area printed is smaller than the area visible in the LCD monitor.
Technical Notes 291
Accessories from Fujifilm The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit https://fujifilm-x.com/support/compatibility/cameras/. Rechargeable Li-ion batteries NP-W126S: Additional high-capacity NP-W126S rechargeable batteries can be purchased as required. Battery chargers BC-W126S: Replacement battery chargers can be purchased as required.
Accessories from Fujifilm Mount adapters FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses. Body caps BCP-001: Cover the camera lens mount when no lens is attached. Shoe-mounted flash units EF-X500: In addition to manual and TTL flash control, this clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed.
Software for Use with Your Camera The camera can be used with the following software. For the latest information on software available from Fujifilm, visit https://fujifilm-x.com/support/compatibility/cameras/. FUJIFILM Camera Remote Establish a wireless connection between your camera and a smartphone or tablet (P 278). http://app.fujifilm-dsc.com/en/camera_remote/ FUJIFILM PC AutoSave Download pictures from your camera over wireless networks (P 280). http://app.fujifilm-dsc.
Software for Use with Your Camera Capture One Pro Fujifilm Capture One Pro Fujifilm is workflow software from Capture One A/S. Capture One Pro Fujifilm supports tethered shooting and the conversion of RAW pictures into other formats. https://www.captureone.com/explore-features/fujifilm FUJIFILM X Acquire This application for Windows and macOS lets you connect to the camera via USB or Wi-Fi and automatically download photos to a specified folder as they are taken, or backup and restore the camera via USB.
For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating instructions • Read Instructions should be read before the appliance is operated. Instructions tructions: The safety and operating instructions • Retain Ins should be retained for future reference. Warnings ngs: All warnings on the appliance and in the • Heed Warni operating instructions should be adhered to. structions: All operating and use instructions • Follow InInstructions should be followed.
For Your Safety Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualified service personlight or power circuits, or where it can fall into such power nel under the following conditions: lines or circuits.
WARNING Do not use in the bathroom or shower Do not disassemble Do not touch internal parts Technical Notes 12 298 Do not us usee the camera in the bathroom or shower. This can cause a fire or electric shock. Never attempt to change or take apart tthe he camera (never ope openn the case). Failure to observe this precaution can cause fire or electric shock. Should the case break open as the result of a fall or other accident, do not touch the exp exposed osed parts.
For Your Safety CAUTION Do not place heavy objects on th thee camera. This can cause the heavy object to tip over or fall and cause injury. Do not move the camera whi while le the AC power adap adapter ter is still connected. connect ed. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the power cord or cables and cause a fire or electric shock. Do not cover cover or wrap the camera camera or the AC power adapter in a cloth oorr blanket.
AC Power Adapters • The AC power adapter is for indoor use only. • Be sure the cable is securely connected to the camera. • Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable. • Do not disassemble. Technical Notes 12 • Do not expose to high heat and humidity. • Do not subject to strong physical shocks. • The adapter may hum or become hot to the touch during use. This is normal.
For Your Safety NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate For Customers in the U. S. A.
For Customers in Canada CAN ICES-3 (B)/NMB-3(B) CAUTION: This Class B digital apparatus complies with Canadian ICES-003. Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
For Your Safety 303 Technical Notes Wireless Network and Bluetooth Devices: Cautions This product complies with the following EU Directives: • Security: Wireless network and Bluetooth devices transmit data via radio and consequently their use requires great• RoHS Directive 2011/65/EU er attention to security than applies in the case of wired • RE Directive 2014/53/EU Hereby, FUJIFILM Corporation declares that the radio networks.
For Your Safety Be sure to read these notes before using the lens Safety Notes WARNING • Make sure that you use the lens correctly. Read these safety notes and the camera Basic Manual carefully before use. • After reading these safety notes, store them in a safe place. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.
Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth.
Cleaning the Image Sensor Dust that cannot be removed using D USER SETTING > SENSOR CLEANING can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. O Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary.
Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: https://fujifilm-x.com/support/download/firmware/cameras/ Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. 1 2 Turn the camera off and check that a memory card is inserted. 3 Turn the camera off. Turn the camera on while pressing the DISP/BACK button.
Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local Fujifilm distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 33). The camera does not turn on. • The battery is inserted incorrectly: Reinsert in the correct orientation (P 30).
Troubleshooting Problem Solution • Insert the camera battery (P 30). • Reinsert the camera battery in the correct orientation (P 30). Charging does not start (USB). • Confirm that the camera is connected to the computer (P 33). • If the computer is off or in sleep mode, turn on or wake the computer and disconnect and reconnect the USB cable (P 33). • Insert the battery. Reinsert the battery in the correct orientation. Charging does not start • Make sure that the charger is correctly plugged in.
Menus and Displays Problem Solution Select ENGLISH for D USER SETTING > Qa Display is not in English. (P 39, 208). Shooting Problem Solution • The memory card is full: Insert a new memory card or delete pictures (P 30, 188). • The memory card is not formatted: Format the memory card in the camera (P 206). • There is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth. No picture is taken when The memory card is damaged: Insert a new memory card • the shutter button is (P 30).
Troubleshooting Technical Notes Problem Solution No panorama is recorded The indicator lamp was orange when you attempted to record a when the shutter button panorama: Wait until the indicator lamps turns off (P 8). is pressed. • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 129). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face occupies a larger area of the frame (P 129).
Problem Solution • Shutter speed is slow and the ambient temperature is high: This is normal and does not indicate a malfunction. * Use pixel mapping (P 119). Pictures are mottled. * X-rays, cosmic rays, and other forms of radiation interacting with the image sensor may cause bright spots of various colors such as white, red, and blue. Pixel mapping helps reduce the occurrence of such bright spots.
Troubleshooting Playback Problem Pictures are grainy. Playback zoom is unavailable. No sound in movie playback. Solution The pictures were taken with a different make or model of camera. The pictures were created using RESIZE or with a different make or model of camera. • Playback volume is too low: Adjust playback volume (P 212). • The microphone was obstructed: Hold the camera correctly during recording. • The speaker is obstructed: Hold the camera correctly during playback.
Connections Problem Solution The camera is connected to a TV: Pictures will be displayed The monitor is blank. on the TV instead of in the camera monitor (P 276). Q EVF ONLY + E is selected for VIEW MODE Both the TV and camera SETTING: Put your eye to the viewfinder or choose a monitor are blank. different VIEW MODE SETTING option (P 14). • The camera is not properly connected: Connect the camera properly (P 276). No picture or sound • Input on the television is set to “TV”: Set input to “HDMI” on TV.
Troubleshooting Wireless Transfer For additional information on troubleshooting wireless connections, visit: https://digitalcamera-support-en.fujifilm.com/ Problem Cannot connect to smartphone. The camera is slow to connect or upload pictures to the smartphone. Upload fails or is interrupted. Solution • The smartphone is too far away: Move the devices closer (P 278). • Nearby devices are causing radio interference: Move the cam- era and smartphone away from microwave ovens or cordless phones (P 278).
Troubleshooting Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinsert the battery (P 30). The battery is exhausted: Charge the battery or insert a The camera is unresponsive. • fully-charged spare battery (P 33). • The camera is connected to a wireless LAN: End the con- nection. The camera does not func- Remove and reinsert the battery (P 30). If the probtion as expected. lem persists, contact your Fujifilm dealer.
Warning Messages and Displays The following warnings appear in the display. Warning Description Low battery. Charge the battery or insert a fully-charged i (red) spare battery. Battery exhausted. Charge the battery or insert a fulj (blinks red) ly-charged spare battery. The camera cannot focus. Use focus lock to focus on ans (displayed in red with other subject at the same distance, then recompose the red focus frame) picture.
Warning LENS ERROR CARD ERROR PROTECTED CARD BUSY b MEMORY FULL Technical Notes 12 318 Description Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. If the problem persists, contact a Fujifilm dealer. • The memory card is not formatted for use in the camera: Format the card. • The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card.
Warning Messages and Displays Warning Description • Memory card error or connection error: Reinsert the card or WRITE ERROR FRAME NO. FULL READ ERROR PROTECTED FRAME turn the camera off and then on again. If the message persists, contact a Fujifilm dealer. • Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. • The memory card is not formatted: Format the memory card.
Warning Messages and Displays Warning CAN NOT CROP Description The picture is damaged or was not created with the camera. Print orders can contain no more than 999 pictures. Copy any additional pictures you wish to print to another memoDPOF FILE ERROR ry card and create a second print order. The picture cannot be printed using DPOF. CAN NOT SET DPOF F CAN NOT SET DPOF Movies cannot be printed using DPOF. The selected picture cannot be rotated. CAN NOT ROTATE F CAN NOT ROTATE Movies cannot be rotated.
Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate.
Specifications System Model Product Number Effective pixels Image sensor Storage media Memory card slot File system File format Image size Lens mount Sensitivity Technical Notes Metering 12 322 FUJIFILM X-S10 FF200001 Approx. 26.1 million 23.5 mm × 15.6 mm (APS-C), X-Trans CMOS sensor with primary color filter Fujifilm-recommended SD/SDHC/SDXC memory cards SD memory card slot (UHS-I compliant) Compliant with Design Rule for Camera File System (DCF2.0), Exif 2.
Specifications System Exposure control * Available with electronic shutter only. O The frame rate and number of frames per burst var- ies with shooting conditions and type of memory card used.
System Focus • Mode: Single or continuous AF; manual focus with focus ring • Autofocus system: Intelligent hybrid AF (TTL contrast-detect/ phase-detection AF) with AF-assist illuminator • Focus-area selection: SINGLE POINT, ZONE, WIDE/TRACKING, ALL White balance Technical Notes 12 Auto (WHITE PRIORITY, AUTO, AMBIENCE PRIORITY), Custom 1, Custom 2, Custom 3, color temperature selection, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, incandescent, underwater Se
Specifications Input/output terminals Microphone connector ⌀3.5 mm mini-stereo jack Headphone jack socket The USB connector can be converted to a headphone jack using the supplied headphone adapter Remote release connector ⌀3.5 mm 3-pole mini jack Digital input/output USB connector (Type-C) USB3.2 Gen1x1 HDMI output HDMI Micro connector (type D) Power supply/other Power supply NP-W126S rechargeable battery (supplied with camera) Battery life • Battery type: NP-W126S • Lens: XF35mmF1.
Power supply/other Camera size 126.0 mm × 85.1 mm × 65.4 mm (32.9 mm excluding projections, (W × H × D) measured at thinnest part)/4.96 in. × 3.35 in. × 2.57 in. (1.30 in.) Camera weight Approx. 415 g/14.6 oz., excluding battery, accessories, and memory card Shooting weight Approx. 465 g/16.4 oz.
Specifications NP-W126S rechargeable battery Nominal voltage 7.2 V Nominal capacity 1260 mAh Operating 0 °C to +40 °C/+32 °F to +104 °F temperature Dimensions 36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.9 in. × 0.6 in. (W × H × D) Weight Approx. 47 g/1.7 oz. N Weight and dimensions vary with the country or region of sale. O Specifications and performance are subject to change without notice. Fujifilm will not be held liable for any errors this manual may contain.
MEMO 328
MEMO 329
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN https://fujifilm-x.
