User Manual

327
Technical Notes
12
Troubleshooting
Problem
Problem
Solution
Solution
No face is
detected
(continued).
•
The camera is tilted: Keep the camera level.
•
The subject’s face is poorly lit: Shoot in bright light.
Wrong subject is
selected.
The selected subject is closer to the center of the
frame than the main subject. Recompose the pic-
ture or turn face detection off and frame the picture
using focus lock (
P
93).
The  ash does
not  re.
The battery is exhausted: Charge the battery or insert a
fully-charged spare battery (
P
30).
The  ash does
not fully light
the subject.
•
The subject is not in range of the  ash: Position the
subject in range of the fl ash.
•
The  ash window is obstructed: Hold the camera
correctly.
•
Shutter speed is faster than ½ s: Choose a slower
shutter speed (
P
64, 72).
Pictures are
blurred.
•
The lens is dirty: Clean the lens (
P
289).
•
The lens is blocked: Keep objects away from the lens
(
P
49).
•
s is displayed during shooting and the focus frame
is displayed in red: Check focus before shooting
(
P
50).
Pictures are
mottled.
•
Shutter speed is slow and the ambient temperature is
high: This is normal and does not indicate a mal-
function.