Owner’s Manual BL00004889-203 EN
Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information For the latest information on this product, including the latest versions of the manuals and sample color photographs, visit: http://fujifilm-dsc.com/manuals/ The site can be accessed not only from your computer but also from smartphones and tablets.
P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 27 3 Basic Photography and Playback 47 4 Movie Recording and Playback 53 5 Taking Photographs 61 6 The Shooting Menus 113 7 Playback and the Playback Menu 173 8 The Setup Menus 199 9 Shortcuts 241 10 Peripherals and Optional Accessories 255 11 Connections 277 12 Technical Notes 289 iii
Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 113 for details.
Menu List P F FLASH SETTING 147 149 151 152 154 155 156 157 160 163 FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING B MOVIE SETTING MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY 4K MOVIE OUTPUT HDMI REC CONTROL MIC LEVEL ADJUSTMENT MIC/REMOTE RELEASE P 164 165 166 167 167 168 P 169 170 170 171 171 172 172 The Playback Menu Adjust playback settings. N See page 180 for details.
Setup Menus Adjust basic camera settings. Menu List N See page 199 for details. D USER SETTING FORMAT DATE/TIME TIME DIFFERENCE a MY MENU SETTING SENSOR CLEANING SOUND & FLASH RESET D SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME vi P D SCREEN SETTING P 201 EVF BRIGHTNESS 212 202 EVF COLOR 213 203 LCD BRIGHTNESS 213 204 LCD COLOR 214 204 1⁄2 IMAGE DISP. 214 206 EVF AUTOROTATE DISPLAYS 215 206 PREVIEW EXP.
Menu List P D POWER MANAGEMENT P 231 222 AUTO POWER OFF PERFORMANCE 232 224 P D SAVE DATA SETTING 234 226 FRAME NO.
P Table of Contents Introduction ................................................................................. ii For the Latest Information..............................................................ii Menu List...................................................................................... iv Shooting Menus ................................................................................. iv The Playback Menu ...........................................................................
Table of Contents Camera Displays .......................................................................12 Electronic Viewfinder/LCD Monitor ...................................... 12 Choosing a Display Mode .......................................................... 14 Adjusting Display Brightness .................................................... 15 The Viewfinder Display ................................................................. 15 The DISP/BACK Button ...........................................
3 Basic Photography and Playback 47 Taking Photographs (Mode P) .............................................48 a Viewing Pictures .................................................................51 b Deleting Pictures .................................................................52 4 Movie Recording and Playback 53 F Recording Movies ..............................................................54 Adjusting Movie Settings............................................................
Table of Contents BKT Bracketing............................................................................94 O AE BKT ............................................................................................. 95 W ISO BKT........................................................................................... 95 X FILM SIMULATION BKT ......................................................... 95 H WHITE BALANCE BKT............................................................. 96 Y DYNAMIC RANGE BKT....
NOISE REDUCTION ........................................................................128 LONG EXPOSURE NR ....................................................................128 LENS MODULATION OPTIMIZER ...........................................129 COLOR SPACE ...................................................................................129 PIXEL MAPPING ...............................................................................130 SELECT CUSTOM SETTING.........................................
Table of Contents SELF-TIMER .........................................................................................151 INTERVAL TIMER SHOOTING ....................................................152 PHOTOMETRY...................................................................................154 SHUTTER TYPE .................................................................................155 IS MODE ...............................................................................................156 ISO ...
Viewing Pictures .................................................................... 178 Playback Zoom ................................................................................179 Multi-Frame Playback ..................................................................179 C The Playback Menu ......................................................... 180 RAW CONVERSION ........................................................................180 ERASE.......................................................
Table of Contents SOUND & FLASH .............................................................................206 RESET .....................................................................................................207 D SOUND SETTING .............................................................. 208 AF BEEP VOL. .....................................................................................208 SELF-TIMER BEEP VOL. .................................................................
SHUTTER AF.......................................................................................227 SHUTTER AE.......................................................................................227 SHOOT WITHOUT LENS ..............................................................228 FOCUS RING ......................................................................................228 AE/AF-LOCK MODE .......................................................................229 APERTURE SETTING ................
Table of Contents The Fn (Function) Buttons ................................................. 248 Assigning Roles to the Function Buttons........................250 E MY MENU ............................................................................ 252 MY MENU SETTING .......................................................................252 10 Peripherals and Optional Accessories 255 External Flash Units .............................................................. 256 Flash Settings ...............
Wireless Transfer .................................................................... 280 Wireless Connections: Smartphones .................................280 Wireless Connections: Computers ......................................281 Connecting to Computers via USB ................................. 282 Windows .............................................................................................282 Mac OS X/macOS...........................................................................
Supplied Accessories The following are included with the camera: • NP-W126S rechargeable battery • BC-W126 battery charger • Body cap • Metal strap clips (× 2) • Clip attaching tool • Protective covers (× 2) • Shoulder strap • Owner’s Manual (this manual) N If you purchased a lens kit, check that a lens is included.
About This Manual This manual contains instructions for your FUJIFILM X-T20 digital camera. Be sure you have read and understood its contents before proceeding. Symbols and Conventions The following symbols are used in this manual: O Information that should be read to prevent damage to the product. N Additional information that may be helpful when using the product. P Pages on which related information may be found. Menus and other text in the displays are shown in bold.
Before You Begin 1
Parts of the Camera 1 Before You Begin A Exposure compensation dial .........................................................5, 91 B Shutter button ................................ 50 C Auto mode selector lever...................7 D Shutter speed dial..................5, 64, 72 E Hot shoe .........................................256 F Drive dial .............................................6 G N (flash pop-up) lever ..................107 H Strap eyelet ......................................
Parts of the Camera 1 Before You Begin W b (delete) button .......................... 52 i DISP (display)/BACK button ....................................................16, 176 X a (playback) button .................. 51 Y Diopter adjustment control ........ 11 j Cable channel cover for DC coupler .....................................290 Z Electronic viewfinder (EVF) ................................................12, 14, 15 k Battery-chamber cover ................ 36 a VIEW MODE button ..................
The Serial Number Plate Do not remove the serial number plate, which provides the FCC ID, KC mark, serial number, and other important information. Before You Begin 1 The Selector Press the selector up (e), right (h), down (f), or left (g) to highlight items. The up, down, left, and right buttons also double as function buttons Fn2 through Fn5 (P 248). Control Lock To prevent accidental operation of the selector and Q button during shooting, press MENU/OK until X is displayed.
Parts of the Camera The Shutter Speed Dial The shutter speed dial is used to choose the shutter speed. 1 Before You Begin The Exposure Compensation Dial Rotate the dial to choose an exposure compensation amount.
The Drive Dial Rotate the dial to choose from the following the drive modes. 1 Before You Begin Mode F Movie BKT1 Bracketing BKT2 CH High-speed burst CL Low-speed burst 6 P S Adv.1 94 Adv.
Parts of the Camera The Auto Mode Selector Lever Switch between auto and manual modes. 1 Mode Select from P (program AE), S (shutter-priority AE), A (aperture-priority AE), and M (manual) modes (P 62, 64, 69, 72). Adjust shutter speed and aperture using program shift (mode P) or set shutter speed and/or aperture manually (modes S, A, and M). Auto mode. The camera adjusts settings automatically according to the option selected by rotating the front command dial.
The Command Dials Rotate or press the command dials to: Front command dial 1 Before You Begin Rotate • Select menu tabs or page through menus. • Adjust aperture. • Select a scene when shooting in auto mode. • Adjust exposure compensation when C is selected with exposure compensation dial. • View other pictures during playback. Press 8 Switch back and forth between aperture and exposure compensation when C is selected with the exposure compensation dial.
Parts of the Camera Rear command dial Press and aperture (program shift). • Choose a shutter speed. • Adjust settings in the quick menu. • Choose the size of the focus frame. • Zoom in or out in full-frame or multi-frame playback. • Zoom in on the active focus point during playback. • Perform the function assigned to the DIAL function button. • Press and hold to choose the manual focus mode focus display. 9 1 Before You Begin Rotate • Highlight menu items.
The Indicator Lamp When the viewfinder is not in use, camera status is shown by the indicator lamp. 1 Before You Begin Indicator lamp Camera status Glows green Focus locked. Focus or slow shutter speed warning. Pictures can Blinks green be taken. Blinks green Recording pictures. Additional pictures can be takand orange en. Recording pictures. No additional pictures can be Glows orange taken at this time. Blinks orange Flash charging; flash will not fire when picture is taken.
Parts of the Camera The LCD Monitor The LCD monitor can be tilted for easier viewing, but be careful not to touch the wires or trap fingers or other objects behind the monitor. Touching the wires could cause camera malfunction. 1 LCD monitor also functions as a touch screen (P 22, 144). Focusing the Viewfinder The camera is equipped with diopter adjustment in the range −4 to +2 m–1 to accommodate individual differences in vision.
Camera Displays This section lists the indicators that may be displayed during shooting. 1 O For illustrative purposes, displays are shown with all indicators lit.
Camera Displays Before You Begin A Focus check ............................89, 141 U Sensitivity .......................................157 B Depth-of-field preview.......... 70, 89 V Exposure compensation .............. 91 C Location data download W Aperture...............................63, 69, 72 status ...............................................238 X Shutter speed .....................63, 64, 72 D Movie mode ...........................54, 169 Y TTL lock ........................
Before You Begin Choosing a Display Mode Press the VIEW MODE button to cycle through the following display modes: 1 • E EYE SENSOR: Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. • EVF ONLY: Viewfinder on, LCD monitor off. • LCD ONLY: LCD monitor on, viewfinder off. • EVF ONLY + E: Putting your eye to the viewfinder turns the viewfinder on; taking it away turns the viewfinder off.
Camera Displays The Viewfinder Display When ON is selected for D SCREEN SETTING > EVF AUTOROTATE DISPLAYS, the indicators in the viewfinder automatically rotate to match camera orientation. O The display in the LCD monitor is unaffected. 15 Before You Begin Adjusting Display Brightness The brightness and hue of the viewfinder and LCD monitor can be adjusted using the items in the D SCREEN SETTING menu.
The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor.
Camera Displays Customizing the Standard Display To choose the items shown in the standard display: Display standard indicators. Use the DISP/BACK button to display standard in1 dicators. 2 Select DISP. CUSTOM SETTING. Select D SCREEN SETTING > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect.
4 Save changes. Press DISP/BACK to save changes. 5 Exit the menus. Press DISP/BACK as needed to exit the menus and return to the shooting display. 1 Before You Begin Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. Framing Outline Enable FRAMING OUTLINE to make the borders of the frame easier to see against dark backgrounds.
Camera Displays Histograms Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Number of pixels 1 • Optimal exposure: Highlights Before You Begin Shadows Pixel brightness Pixels are distributed in an even curve throughout the tone range. • Overexposed: Pixels are clustered on the right side of the graph. • Underexposed: Pixels are clustered on the left side of the graph.
Using the Menus To display the menus, press MENU/OK. Shooting Playback IMAGE QUALITY SETTING PLAY BACK MENU 1 Before You Begin RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVA WIRELESS COMMUNICATION IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE EXIT EXIT To navigate the menus: 1 Press MENU/OK to display the menus. 2 Press the selector left to highlight the tab for the current menu.
Using the Menus 3 Press the selector up or down to highlight the tab (H, G, A, F, B, E, C or D) containing the desired item. 4 Press the selector right to place the cursor in the menu. 1 through menus and the rear command dial to highlight menu items.
Touch Screen Mode Use touch controls for shooting or playback. Before You Begin Shooting Touch Controls 1 Touch controls can be used for such operations as choosing the focus area and taking photographs. The operation performed can be selected by tapping the touchscreen mode indicator in the display to cycle through the following options: Mode TOUCH SHOOTING Description Tap your subject in the display to focus and release the shutter. AF 22 Tap to select a focus point.
Touch Screen Mode Mode AREA Description Tap to select a point for focus or zoom. The focus frame will move to the selected point. 1 OFF N Touch control settings can be adjusted using G AF/ MF SETTING > TOUCH SCREEN MODE (P 144). To disable touch controls and hide the touch screen mode indicator, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING. 23 Before You Begin Touch controls off. The display does not respond when tapped.
Playback Touch Controls When ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING, touch controls can be used for the following playback operations: 1 Before You Begin • Swipe: Swipe a finger across the display to view other images. • Pinch-out: Place two fingers on the display and spread them apart to zoom in. • Pinch-in: Place two fingers on the display and slide them together to zoom out. N Pictures can be zoomed out until the entire image is visible but no further.
Touch Screen Mode • Drag: View other areas of the image during playback zoom.
MEMO 26
First Steps 27
Attaching the Strap Attach the strap clips to the camera and then attach the strap. 1 Open a strap clip. Use the clip attaching tool to open a strap clip, making sure that the tool and clip are in the orientations shown. 2 Place the strap clip on an eyelet. Hook the strap eyelet in the clip opening. Remove the tool, using the other hand to keep the clip in place. 2 First Steps O Keep the tool in a safe place, as you will need it to open the strap clips when removing the strap.
Attaching the Strap 4 Attach a protective cover. Place a protective cover over the eyelet as shown, with the black side of the cover toward the camera. 5 2 First Steps 3 Pass the clip through the eyelet. Rotate the clip fully through the eyelet until it clicks closed. Fasten the strap. Insert the strap through a protective cover and strap clip and fasten as shown. O To avoid dropping the camera, be sure the strap is correctly secured. Repeat Steps 1–5 for the second eyelet.
Attaching a Lens The camera can be used with lenses for the FUJIFILM X-mount. First Steps Remove the body cap from the camera and the rear cap from the 2 lens. Place the lens on mount, keeping the marks on the lens and camera aligned, and then rotate the lens until it clicks into place. O When attaching lenses, ensure that dust or other foreign matter does not enter the camera and be careful not to touch the camera’s internal parts.
Attaching a Lens Removing Lenses To remove the lens, turn the camera off, then press the lens release button and rotate the lens as shown. O To prevent dust accumulating on the lens or inside the camera, replace the lens caps and camera body cap when the lens is not attached. 2 O Before attaching or removing (exchanging) lenses, attach the lens caps and check that the lenses are free of dust and other foreign matter.
Charging the Battery The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger. O An NP-W126S rechargeable battery is supplied with the camera. Charging takes about 150 minutes. 2 Place the battery in the charger. Place the battery in the supplied battery charger as shown. 2 Plug the charger in. Plug the charger into an indoor power outlet. The charging indicator will light. 3 Charge the battery. Remove the battery when charging is complete.
Charging the Battery The Charging Indicator The charging indicator shows battery charge status as follows: Charging indicator Blinks Battery fault. Off Action Insert the battery. 2 Remove the battery. — Unplug the charger and remove the battery. 33 First Steps On Battery status Battery not inserted. Battery fully charged. Battery charging.
O The supplied AC cord is for use exclusively with the supplied battery charger. Do not use the supplied charger with other cords or the supplied cord with other devices. Do not affix labels or other objects to the battery. Failure to observe this precaution could make it impossible to remove the battery from the camera. 2 First Steps Do not short the battery terminals. The battery could overheat. Read the cautions in “The Battery and Power Supply”.
Charging the Battery Charging via Computer The battery also charges if the camera is connected to a computer. Turn the camera off, insert the battery, and connect a USB cable as shown, making sure the connectors are fully inserted. The charging time of about 300 minutes is not affected by the type of cable used. 2 First Steps Charging status is shown by the indicator lamp.
Inserting Batteries and Memory Cards After charging the battery, insert the battery and memory card as described below. 2 1 First Steps Open the battery-chamber cover. Slide the battery-chamber latch as shown and open the battery-chamber cover. O Do not open the battery-cham- ber cover when the camera is on. Failure to observe this precaution could damage image files or memory cards. Do not use excessive force when handling the battery-chamber cover.
Inserting Batteries and Memory Cards 2 Insert the battery. Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the direction shown by the arrow. Confirm that the battery is securely latched. 3 First Steps O 2 Insert the battery in the orientation shown. Do not use force or attempt to insert the battery upside down or backwards. The battery will slide in easily in the correct orientation. Insert the memory card.
4 Close the battery-chamber cover. Close and latch the cover. O If the cover does not close, check that the battery is in the correct orientation. Do not attempt to force the cover shut.
Inserting Batteries and Memory Cards Removing the Battery Before removing the battery, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. 2 ture environments. Observe caution when removing the battery. Removing Memory Cards Before removing memory cards, turn the camera off and open the battery-chamber cover.
First Steps Compatible Memory Cards FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera; UHS-I is supported. Cards with a UHS speed class of 3 or better are recommended for movies. A complete list of approved memory cards is available at http://www. 2 fujifilm.com/support/digital_cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or MultiMediaCard (MMC) devices.
Inserting Batteries and Memory Cards O Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. Do not affix labels or other objects to memory cards. Peeling labels can cause camera malfunction. Movie recording may be interrupted with some types of memory card.
Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Rotate the switch to ON to turn the camera on, or to OFF to turn the 2 camera off. First Steps O Fingerprints and other marks on the lens or viewfinder can affect pictures or the view through the viewfinder. Keep the lens and viewfinder clean. N Press the a button to start playback. Press the shutter button halfway to return to shooting mode.
Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full. Low battery. Charge as soon as possible. Battery exhausted. Turn camera off and recharge battery.
Basic Setup A language-selection dialog is displayed the first time the camera is turned on. 1 Turn the camera on. A language-selection dialog will be displayed. 2 Choose a language. Highlight a language and press MENU/OK. 3 Set the date and time. Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down.
Basic Setup N If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on. Skipping the Current Step Press DISP/BACK to skip the current step. Any steps you skip will be displayed the next time the camera is turned on.
Basic Setup Choosing a Different Language To change the language: 2 1 Display language options. Select D USER SETTING > a. 2 Choose a language. Highlight the desired option and press MENU/OK. First Steps Changing the Time and Date To set the camera clock: 1 Display DATE/TIME options. Select D USER SETTING > DATE/TIME. 2 Set the clock. Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. Press MENU/OK to set the clock.
Basic Photography and Playback 47
Taking Photographs (Mode P) This section describes how to take pictures using program AE (mode P). See pages 62–73 for information on S, A, and M modes. 1 Adjust settings for program AE. B C A 3 Basic Photography and Playback E A Auto mode selector lever (P 7): Select z. B Shutter speed (P 62): Select A (auto). C Drive mode (P 6): Select S (single frame). D Focus mode (P 78): Select S (single AF). E Aperture (P 62): Select A (auto).
Taking Photographs (Mode P) 2 Check the shooting mode. Confirm that P appears in the display. 3 Ready the camera. Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands can blur your shots. 3 Basic Photography and Playback To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens and AF-assist illuminator. 4 Frame the picture.
Taking Photographs (Mode P) 5 Focus. Press the shutter button halfway to focus. N If the subject is poorly lit, the AF-assist illuminator may light. Focus indicator Focus frame If the camera is able to focus, it will beep twice and focus area and focus indicator will glow green. Focus and exposure will lock while the shutter button is pressed halfway.
a Viewing Pictures Pictures can be viewed in the viewfinder or LCD monitor. To view pictures full frame, press a. 100-0001 3 N Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display correctly and that playback zoom may not be available. 51 Basic Photography and Playback Additional pictures can be viewed by pressing the selector left or right or rotating the front command dial.
b Deleting Pictures Use the b button to delete pictures. O Deleted pictures can not be recovered. Copy important pictures to a computer or other storage device before proceeding. 1 3 With a picture displayed full frame, press the b button and select FRAME. Basic Photography and Playback ERASE FRAME SELECTED FRAMES ALL FRAMES 2 Press the selector left or right to scroll through pictures and press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures.
Movie Recording and Playback 53
F Recording Movies This section describes how to film movies in auto mode. 4 Movie Recording and Playback 1 Rotate the drive dial to F. 2 Rotate the auto mode selector lever to AUTO to shoot movies in S ADVANCED SR AUTO mode. N Rotate the lever to z to shoot movies in mode P. Movies shot with U selected for MOVIE MODE will also be recorded in mode P. 3 54 Press the shutter button to start recording. A recording indicator (V) and the time remaining are displayed while recording is in progress.
Recording Movies 4 Press the button again to end recording. Recording ends automatically when the maximum length is reached or the memory card is full. Using an External Microphone Sound can be recorded with external microphones that connect using jacks 2.5 mm in diameter; microphones that require bus power can not be used. See the microphone manual for details.
O Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. Note that the microphone may pick up lens noise and other sounds made by the camera during recording. Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not indicate a malfunction. N The indicator lamp lights while recording is in progress.
Recording Movies Adjusting Movie Settings Frame size and rate can be selected using B MOVIE SETTING > MOVIE MODE, while the card used to store movies can be selected using D SAVE DATA SETTING > MOVIE FILE DESTINATION. Focus mode is selected using the focus mode selector; for continuous focus adjustment, select C, or choose S and enable Intelligent Face Detection. Intelligent Face Detection is not available in focus mode M.
a Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. 12/31/2050 10:00 AM PLAY ±0 The following operations can be performed while a movie is displayed: 4 Movie Recording and Playback Playback in Playback Selector progress ((x x) paused (y (y) End playback e Start/resume Pause playback f playback Single frame Adjust speed gh rewind/advance 29m59s Progress is shown in the display during playback. O Do not cover the speaker during playback.
Viewing Movies N Press MENU/OK to pause playback and display volume controls. Press the selector up or down to adjust the volume; press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SETTING > PLAYBACK VOLUME. Playback Speed Press the selector left or right to adjust playback speed during playback. Speed is shown by the number of arrows (M or N).
MEMO 60
Taking Photographs 61
Choosing a Shooting Mode For control over shutter speed and aperture (P, S, A, and M modes), rotate the auto mode selector lever to z. Rotate the lever to AUTO to choose from modes suited to specific subject types, or select S ADVANCED SR AUTO to let the camera automatically match the mode to the subject. Taking Photographs Mode P: Program AE Let the camera choose shutter speed and aperture 5 for optimal exposure. Other values that produce the same exposure can be selected with program shift.
Choosing a Shooting Mode Confirm that P appears in the display. O If the subject is outside the metering range of the cam- era, the shutter speed and aperture displays will show “– – –”. Program Shift If desired, you can rotate the rear command dial to select other combinations of shutter speed and aperture without altering exposure (program shift).
Mode S: Shutter-Priority AE Choose a shutter speed and let the camera adjust aperture for optimal exposure. B A C Taking Photographs Adjust settings as follows: Auto mode selector lever: z 5 A B Shutter speed: Choose a shutter speed C Aperture: A (auto) Confirm that S appears in the display. O 64 If the correct exposure can not be achieved at the selected shutter speed, aperture will be displayed in red.
Choosing a Shooting Mode N At settings other than 180X, shutter speed can also be adjusted in increments of 1⁄3 EV by rotating the rear command dial. Shutter speed can be adjusted even while the shutter button is pressed halfway. Sensitivity and Depth of Field If you choose a fast shutter speed when the subject is poorly lit, the camera autoexposure program will select a wider aperture.
Time (T) Rotate the shutter speed dial to T (time) to choose slow shutter speeds for long time-exposures. Use of a tripod is recommended to prevent the camera moving during the exposure. 5 Taking Photographs 1 Rotate the shutter speed dial to T. 2 Rotate the rear command dial to choose a shutter speed. 3 Press the shutter button all the way down to take a picture at the selected shutter speed. A countdown timer will be displayed while the exposure is in progress.
Choosing a Shooting Mode Bulb (B) Select a shutter speed of B (bulb) for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the exposure. Rotate the shutter speed dial to B. 2 Press the shutter button all the way down. The shutter will remain open for up to 60 minutes 5 while the shutter button is pressed; the display shows the time elapsed since the exposure started.
Using a Remote Release An optional RR-90 remote release can be used for long time-exposures. The RR-90 connects via the Micro USB (Micro-B) USB 2.0 connector. Alternatively, electronic releases from third-party suppliers can be connected via the microphone/remote release connector (⌀2.5 mm 3-pole mini jack). Third-party mechanical releases connect 5 as shown.
Choosing a Shooting Mode Mode A: Aperture-Priority AE Choose an aperture and let the camera adjust shutter speed for optimal exposure. B A C Taking Photographs Adjust settings as follows: A Auto mode selector lever: z 5 B Shutter speed: A (auto) C Aperture: Select Z and rotate the lens aperture ring to adjust aperture Confirm that A appears in the display. O If the correct exposure can not be achieved at the selected aperture, shutter speed will be displayed in red.
Previewing Depth of Field When PREVIEW DEPTH OF FIELD is assigned to a function button, pressing the button stops aperture down to the selected setting, allowing depth of field to be previewed in the display. N If both AF DISTANCE INDICATOR and MF DISTANCE INDICATOR are selected in the D SCREEN SETTING > DISP. CUSTOM SETTING list, depth of field can also be previewed using the depth-of-field indicator in the standard display.
Choosing a Shooting Mode Sensitivity and Motion Blur If you choose a narrow aperture when the subject is poorly lit, the shutter speed selected by the autoexposure program may not be fast enough to prevent motion blur. For faster shutter speeds that reduce motion blur, select a higher sensitivity.
Mode M: Manual Exposure Alter exposure from that selected by the camera. B A C Taking Photographs Adjust settings as follows: A Auto mode selector lever: z 5 B Shutter speed: Choose a shutter speed C Aperture: Select Z and rotate the lens aperture ring to adjust aperture Confirm that M appears in the display. The amount the picture would be under- or over-exposed at current settings is shown by the exposure indicator; adjust shutter speed and aperture until the desired exposure is reached.
Choosing a Shooting Mode Exposure Preview To preview exposure in the LCD monitor, select an option other than OFF for D SCREEN SETTING > PREVIEW EXP./ WB IN MANUAL MODE. Select OFF when using the flash or on other occasions on which exposure may change when the picture is taken.
Auto Mode Auto mode offers options suited to particular subject types. B A Taking Photographs Adjust settings as follows: Auto mode selector lever: AUTO 5 A B Drive dial: S (single frame) The currently-selected scene appears in the display. Rotate the front command dial (or use the A SHOOTING SETTING > SCENE POSITION item in the shooting menu) to choose from the following options: Mode S ADVANCED SR AUTO h PORTRAIT 74 Description The camera automatically optimizes settings to suit the scene.
Choosing a Shooting Mode Mode Z PORTRAIT ENHANCER M LANDSCAPE 75 5 Taking Photographs Description Processes portraits to give the subject a smooth, natural-looking complexion. Choose for daylight shots of buildings and landscapes. N SPORT Choose when photographing moving subjects. O NIGHT Choose for poorly lit twilight or night scenes. H NIGHT Choose this mode for slow shutter speeds when (TRIPOD) shooting at night.
Choosing a Shooting Mode S ADVANCED SR AUTO The scene selected by the camera in S ADVANCED SR AUTO mode is shown by an icon in the display. Taking Photographs • a AUTO • c LANDSCAPE • d NIGHT • h NIGHT (TRIPOD) • e MACRO • v SUNSET 5 • x SKY • z SKY & GREENERY • g BACKLIT PORTRAIT • a PORTRAIT&MOTION • u BEACH • w SNOW • y GREENERY • d PORTRAIT • c MOVING OBJECT • b BACKLIT PORTRAIT& MOTION O The mode selected may vary with shooting conditions.
Autofocus Take pictures using autofocus. 1 Rotate the focus mode selector to S or C (P 78). 2 Use G AF/MF SETTING > AF MODE to choose an AF mode (P 80). 3 Choose the position and size of the focus frame (P 82). 4 Take pictures. 5 Taking Photographs N For information on the autofocus system, visit: http://fujifilm-x.com/af/en/index.
Focus Mode Use the focus mode selector to choose how the camera focuses. Choose from the following options: Mode Description Single AF: Focus locks while the shutter button is pressed (AF-S) halfway. Choose for stationary subjects. Continuous AF: Focus is continually adjusted to reflect C changes in the distance to the subject while the shutter (AF-C) button is pressed halfway. Use for subjects that are in motion. Eye-detection AF is not available. Manual: Focus manually using the lens focus ring.
Autofocus The Focus Indicator The focus indicator turns green when the subject is in focus and blinks white when the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing and are displayed continu- Focus indicator ously in mode C. j is displayed in manual focus mode.
Autofocus Options (AF Mode) Choose how the camera focuses in modes S and C. 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > AF MODE. Choose an AF mode. N This feature can also be accessed via shortcuts (P 242). How the camera focuses depends on the focus mode. 5 Focus Mode S (AF-S) Taking Photographs Option Description r Camera focuses on subject in seSINGLE lected focus point. Use for pinPOINT point focus on selected subject.
Autofocus Focus Mode C (AF-C) Option Description Sample image r Focus tracks subject at selected foSINGLE cus point. Use for subjects moving POINT toward or away from camera. Focus tracks subject in selected focus zone. Use for subjects that are ZONE moving fairly predictably. y z Focus tracks subjects moving WIDE/ through wide area of frame.
Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 1 2 3 5 Taking Photographs 82 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > FOCUS AREA to view the focus-point display. Use the selector and rear command dial to choose a focus area (P 83).
Autofocus Selecting a Focus Point Use the selector to choose the focus point and the rear command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode. AF mode y z DISP/BACK button Press Press Rear command dial Rotate Choose from 5 frame sizes Select focus Select center Choose from point focus point 3 frame sizes 5 Press Restore original size — N Manual focus-point selection is not available when z WIDE/TRACKING is selected in focus mode S.
The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT 5 AF mode y ZONE z WIDE/TRACKING Taking Photographs Number of points avail- Choose from zones Position focus frame able can be selected with 7 × 7, 5 × 5, or over subject and press using G AF/MF SET- 3 × 3 focus points. MENU/OK. TING > NUMBER OF THE FOCUS POINTS.
Autofocus Burst Mode Focus-Frame Selection When continuous high-speed (CH) is selected for drive mode, the number of focus frames available in focus mode C drops. Single point Zone Wide/tracking 85 5 Taking Photographs Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object.
Autofocus Checking Focus To zoom in on the current focus area for precise focus, press the center of the rear command dial. Press the center of the rear command dial again to cancel zoom. M M Normal display 5 Focus zoom N In focus mode S, zoom can be adjusted by rotating the Taking Photographs rear command dial when STANDARD or FOCUS PEAK HIGHLIGHT is selected for G AF/MF SETTING > MF ASSIST (P 141).
Manual Focus Adjust focus manually. 1 Rotate the focus mode selector to M. j will appear in the display. 㹋 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. 3 Take pictures. 5 Taking Photographs 2 N Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the direction of rotation of the focus ring. Regardless of the option selected, manual focus will be used when the lens is in manual focus mode.
Quick Focus To use autofocus to focus on the subject in the selected focus area, press the button to which focus lock or AF-ON has been assigned (the size of the focus area can be chosen with the rear command dial). In manual focus mode, you can use this feature to quickly focus on a chosen subject using either single or continuous AF according to the option chosen for G AF/MF SETTING > INSTANT AF SETTING.
Manual Focus Checking Focus A variety of options are available for checking focus in manual focus mode. Focus Zoom If ON is selected for G AF/MF SETTING > FOCUS CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated. N If STANDARD or FOCUS PEAK HIGHLIGHT is selected for G AF/MF SETTING > MF ASSIST, zoom can be adjusted by rotating the rear command dial.
Manual Focus MF Assist The G AF/MF SETTING > MF ASSIST option can be used to check focus when pictures are framed in the LCD monitor or electronic viewfinder in manual focus mode. N The MF ASSIST menu can be displayed by pressing and holding the center of the rear command dial. Taking Photographs The following options are available: • FOCUS PEAK HIGHLIGHT: Highlights high-contrast outlines. Rotate 5 the focus ring until the subject is highlighted.
d Exposure Compensation Adjust exposure. Rotate the exposure compensation dial. O The amount of compensation available varies with the shooting mode. C (Custom) When the exposure compensation dial is rotated to C, exposure compensation can be adjusted by rotating the front command dial. 5 N The front command dial can be used to set exposure compensation to values between −5 and +5 EV. The front command dial can be used to set aperture or exposure compensation. Press the dial to toggle between the two.
Focus/Exposure Lock Compose photographs with off-center subjects. 1 5 2 Focus: Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). P Taking Photographs Recompose: Keep the shutter button pressed halfway. P 3 Shoot: Press the button all the way down.
Focus/Exposure Lock The AF-L and AE-L Buttons Focus and exposure can also be locked with the AF-L and AE-L buttons. At default settings, the AF-L button locks focus, the AE-L button exposure. Focus and/or exposure will remain locked while the button is pressed, whether or not the shutter button is pressed halfway.
BKT Bracketing Automatically vary settings over a series of pictures. 1 Rotate the drive dial to BKT1 or BKT2. 2 Navigate to DRIVE SETTING in the A SHOOTING SETTING menu and select O AE BKT, W ISO BKT, X FILM SIMULATION BKT, H WHITE BALANCE BKT, or Y DYNAMIC RANGE BKT. 5 Taking Photographs N This feature can also be accessed via shortcuts (P 242). 3 94 Take photographs.
Bracketing O AE BKT Select a bracketing amount (options range from ±1⁄3 to ±2 EV in increments of 1⁄3 EV). Each time the shutter button is pressed, the camera will take three shots: one using the metered value for exposure, the second overexposed by the selected amount, and the third underexposed by the same amount. N Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system. Taking Photographs W ISO BKT Select a bracketing amount (±1, ±2⁄3, or ±1⁄3).
Bracketing H WHITE BALANCE BKT Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.
I Continuous Shooting (Burst Mode) Capture motion in a series of pictures. 1 Rotate the drive dial to select CH (high-speed burst) or CL (low-speed burst). 2 Navigate to DRIVE SETTING in the A SHOOTING SETTING menu and choose a frame advance rate. N This feature can also be accessed via shortcuts (P 242). Take photographs. The camera will take pictures while the shutter button is pressed; shooting ends when the shutter button is released or the memory card is full.
Continuous Shooting (Burst Mode) O If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder. Burst shooting may not begin if the space available on the memory card is insufficient. Frame rate varies with the subject, shutter speed, sensitivity, and focus mode. Frame rates may slow and recording times increase as more shots are taken. The flash turns off automatically; the previously-selected flash mode is restored when burst shooting is disabled.
ADV. Advanced Filters Take photos with filter effects. 1 Rotate the drive dial to Adv.1 or Adv.2. 2 Navigate to DRIVE SETTING in the A SHOOTING SETTING menu and choose a filter effect. N This feature can also be accessed via shortcuts (P 242). Taking Photographs 3 5 Take photographs.
Advanced Filters Advanced Filter Options Choose from the following filters: Filter G TOY CAMERA H MINIATURE I POP COLOR J HIGH-KEY Z LOW-KEY 5 K DYNAMIC TONE Taking Photographs X SOFT FOCUS Description Choose for a retro toy camera effect. The tops and bottoms of pictures are blurred for a diorama effect. Create high-contrast images with saturated colors. Create bright, low-contrast images. Create uniformly dark tones with few areas of emphasized highlights.
j Multiple Exposures Create a photograph that combines two exposures. 1 Rotate the drive dial to j. 5 Taking Photographs 2 3 Take the first shot. Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. NEXT RETRY EXIT N To return to Step 2 and retake the first shot, press the selector left. To save the first shot and exit without creating a multiple exposure, press DISP/BACK.
Multiple Exposures 4 Take the second shot, using the first frame as a guide. EXIT 30 5 Press MENU/OK to create the multiple exposure, or press the selector left to return to Step 4 and retake the second shot. 5 Taking Photographs 102 2.
u Panoramas Follow an on-screen guide to create a panorama. Rotate the drive dial to u. 2 To select the size of the angle through which you will pan the camera while shooting, press the selector left. Highlight a size and press MENU/OK. 3 Press the selector right to view a choice of pan 5 directions. Highlight a pan direction and press MENU/OK. 4 Press the shutter button all the way down to start recording. There is no need to keep the shutter button pressed during recording.
For Best Results For best results, use a lens with a focal length of 35 mm or less (50 mm or less in 35 mm format). Prop your elbows against your sides and move the camera slowly in a small circle at a steady speed, keeping the camera parallel or at right angles to the horizon and being careful only to pan in the direction shown by the guides. Use a tripod for best results. If the desired results are not achieved, try panning at a different speed.
Panoramas O If the shutter button is pressed all the way down before the panorama is complete, shooting will end and no panorama may be recorded. Shooting may also be interrupted if the camera is panned too quickly or too slowly. Panning the camera in a direction other than that shown cancels shooting.
Panoramas Viewing Panoramas In full-frame playback, you can use the rear command dial to zoom panoramas in or out. Alternatively, you can play the panorama back using the selector. PLAY STOP 5 PAUSE Taking Photographs Press the selector down to start playback and press again to pause. While playback is paused, you can scroll the panorama manually by pressing the selector left or right; vertical panoramas will scroll vertically, horizontal panoramas horizontally.
Flash Photography Use the built-in flash for additional lighting when shooting at night or indoors under low light. 1 Slide the N lever as shown to raise the flash. O Be careful not to injure your- self on the edges of the raised flash. In the menus, navigate to F FLASH SETTING > FLASH FUNCTION SETTING to display options for the built-in flash.
O Depending on the distance to the subject, some lenses may cast shadows in photos taken with the flash. The flash will not fire at some settings, for example in panorama mode or when the electronic shutter is used. Choose shutter speeds slower than 180X when using the flash in exposure mode S (shutter-priority AE) or manual (M). N Except in commander mode, the flash will fire several times with each shot. Do not move the camera until shooting is complete.
Flash Photography Flash Settings The following settings are available with the built-in flash. MODE Built-In Flash ADJUST END Setting 109 5 Taking Photographs Description Choose from the following options: • TTL: TTL mode. Adjust flash compensation (B) and choose a flash mode (C). • M: The flash fires at the selected output (B) regardless of subject brightness or camera settings. Output is expressed in fractions of full power, A Flash control from ⁄ to ⁄.
Setting C Flash mode (TTL) 5 Taking Photographs D Sync 110 Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
Flash Photography Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. Flash Sync Speed The flash will synchronize with the shutter at shutter speeds of 1⁄180 s or slower.
MEMO 112
The Shooting Menus 113
H IMAGE QUALITY SETTING Adjust image quality settings. To display image quality settings, press MENU/OK in the shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE EXIT N The options available vary with the shooting mode selected.
IMAGE QUALITY SETTING IMAGE SIZE Choose the size and aspect ratio at which still pictures are recorded. Option O3:2 P3:2 Q3:2 Image size Option 6000 × 4000 O 16 : 9 4240 × 2832 P 16 : 9 3008 × 2000 Q 16 : 9 Image size Option 6000 × 3376 O 1 : 1 4240 × 2384 P 1 : 1 3008 × 1688 Q 1 : 1 Image size 4000 × 4000 2832 × 2832 2000 × 2000 N IMAGE SIZE is not reset when the camera is turned off or another shooting mode is selected.
IMAGE QUALITY Choose a file format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios for higher-quality JPEG images, while NORMAL and NORMAL+RAW use higher JPEG compression ratios to increase the number of images that can be stored.
IMAGE QUALITY SETTING RAW RECORDING Choose whether to compress RAW images. Option Description UNCOMPRESSED RAW images are not compressed. RAW images are compressed using a reversible algorithm that reduces file size with no loss of imLOSSLESS age data. The images can be viewed in RAW FILE COMPRESSED CONVERTER EX 2.0 or other software that supports “lossless” RAW compression.
FILM SIMULATION Simulate the effects of different kinds of film, including black-and-white (with or without color filters). Choose a palette according to your subject and creative intent. Option c PROVIA/ STANDARD d Velvia/VIVID e ASTIA/SOFT 6 The Shooting Menus i CLASSIC CHROME g PRO Neg. Hi h PRO Neg. Std 118 Description Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes. A high-contrast palette of saturated colors, suited to nature photos.
IMAGE QUALITY SETTING Option Description Take black-and-white photos with rich grada* a ACROS tion and outstanding sharpness. b MONOCHROME * Take pictures in standard black and white. Take pictures in sepia. f SEPIA * Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. The yellow (Ye) filter deepens purples and blues and the red (R) filter blues and greens.
GRAIN EFFECT Add a film grain effect. Select an amount (STRONG or WEAK) or choose OFF to turn film grain off.
IMAGE QUALITY SETTING DYNAMIC RANGE Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights and shadows when photographing high-contrast scenes.
WHITE BALANCE For natural colors, choose a white balance option that matches the light source. 6 The Shooting Menus Option Description AUTO White balance is adjusted automatically. k/l/m Measure a value for white balance. k Choose a color temperature. i For subjects in direct sunlight. j For subjects in the shade. k Use under “daylight” fluorescent lights. l Use under “warm white” fluorescent lights. m Use under “cool white” fluorescent lights. n Use under incandescent lighting.
IMAGE QUALITY SETTING Fine-Tuning White Balance Pressing MENU/OK after selecting a white balance option displays the dialog shown at right; use the selector to fine-tune white balance or press DISP/BACK to exit without fine-tuning.
Custom White Balance Choose k, l, or m to adjust white balance for unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it fills the display and press the shutter button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog).
IMAGE QUALITY SETTING k: Color Temperature Selecting k in the white balance menu displays a list of color temperatures; highlight a color temperature and press MENU/OK to select the highlighted option and display the fine-tuning dialog. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET SHIFT 10000K 9100K 8300K 7700K 7100K 125 6 The Shooting Menus Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K).
HIGHLIGHT TONE Adjust the appearance of highlights. Choose from seven options between +4 and −2. +4 +3 +2 Options +1 0 −1 −2 6 SHADOW TONE The Shooting Menus Adjust the appearance of shadows. Choose from seven options between +4 and −2.
IMAGE QUALITY SETTING COLOR Adjust color density. Choose from nine options between +4 and −4. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 127 The Shooting Menus 6 SHARPNESS Sharpen or soften outlines. Choose from nine options between +4 and −4.
NOISE REDUCTION Reduce noise in pictures taken at high sensitivities. Choose from nine options between +4 and −4. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 6 LONG EXPOSURE NR The Shooting Menus Select ON to reduce mottling in long time-exposures.
IMAGE QUALITY SETTING LENS MODULATION OPTIMIZER Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens. Options ON OFF The Shooting Menus 6 COLOR SPACE Choose the gamut of colors available for color reproduction. Option Description sRGB Recommended in most situations. Adobe RGB For commercial printing.
PIXEL MAPPING Use this option if you notice bright spots in your pictures. 1 Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. 2 Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. Processing may take a few seconds. O Results are not guaranteed. Be sure the battery is fully charged before beginning pixel mapping. 6 The Shooting Menus Pixel mapping is not available when the camera temperature is elevated.
IMAGE QUALITY SETTING SELECT CUSTOM SETTING Recall settings saved with EDIT/SAVE CUSTOM SETTING. Settings can be recalled from any of the seven custom settings banks. Banks CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CUSTOM 5 CUSTOM 6 CUSTOM 7 1 Press MENU/OK in shooting mode to display the shooting menu. Select the H IMAGE QUALITY SETTING tab, then highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK.
IMAGE QUALITY SETTING 2 3 4 6 Highlight a custom settings bank and press MENU/OK to select. Adjust the following as desired: • ISO • DYNAMIC RANGE • FILM SIMULATION • GRAIN EFFECT • WHITE BALANCE • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • NOISE REDUCTION Press DISP/BACK. A confirmation dialog will be displayed; highlight OK and press MENU/OK.
G AF/MF SETTING Adjust focus settings. To display focus settings, press MENU/OK in the shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA AF MODE AF-C CUSTOM SETTINGS AF POINT DISPLAY NUMBER OF THE FOCUS POINTS PRE-AF AF ILLUMINATOR FACE/EYE DETECTION SETTING EXIT N The options available vary with the shooting mode selected. The Shooting Menus 6 FOCUS AREA Choose the focus area for autofocus, manual focus, and focus zoom.
AF MODE Choose the AF mode for focus modes S and C. Option 6 The Shooting Menus Description The camera focuses on the subject in the selected focus r point. The number of focus points available can be seSINGLE lected using G AF/MF SETTING > NUMBER OF THE POINT FOCUS POINTS. Use for pin-point focus on a selected subject. The camera focuses on the subject in the selected focus y zone. Focus zones include multiple focus points, makZONE ing it easier to focus on subjects that are in motion.
AF/MF SETTING AF-C CUSTOM SETTINGS Select focus-tracking options for focus mode C. Choose from Sets 1–5 according to your subject. AF-C CUSTOM SETTINGS SET 1 STANDARD SETTING FOR MULTI-PURPOSE OK 135 6 The Shooting Menus Option Description SET 1 STANDARD A standard tracking option that works well with SETTING FOR MULTIthe typical range of moving subjects. PURPOSE The focus system attempts to track the chosen SET 2 IGNORE subject.
AF POINT DISPLAY yz Choose whether individual focus frames are displayed when ZONE or WIDE/TRACKING is selected for G AF/MF SETTING > AF MODE. Options ON OFF 6 NUMBER OF THE FOCUS POINTS The Shooting Menus Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected for AF MODE. Option 91 POINTS (7 × 13) 325 POINTS (13 × 25) 136 Description Choose from 91 focus points arranged in a 7- by 13-point grid.
AF/MF SETTING PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway. Note that this increases the drain on the battery. Options ON OFF Options ON OFF O The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus, try increasing the distance to the subject. Avoid shining the AF-assist illuminator directly into your subject’s eyes.
The Shooting Menus FACE/EYE DETECTION SETTING Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits. Choose for shots that emphasize portrait subjects. Faces can be detected with the camera in vertical or horizontal orientation; if a face is detected, it will be indicated by a green border.
AF/MF SETTING O In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject. If the subject moves as the shutter button is pressed, the face may not be in the area indicated by the green border when the picture is taken. N If the camera is unable to detect the subject’s eyes because they are hidden by hair, glasses, or other objects, the camera will instead focus on faces. Face/eye detection options can also be accessed via shortcuts (P 242).
AF+MF If ON is selected in focus mode S, focus can be adjusted manually by rotating the focus ring while the shutter button is pressed halfway. Both standard and focus peaking MF assist options are supported. Options ON OFF O Lenses with a focus distance indicator must be set to 6 manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator.
AF/MF SETTING MF ASSIST Choose how focus is displayed in manual focus mode. Option STANDARD DIGITAL SPLIT IMAGE FOCUS PEAK HIGHLIGHT Description Focus is displayed normally (focus peaking and digital split image are not available). Displays a black-and-white (MONOCHROME) or color (COLOR) split image in the center of the frame. Frame the subject in the split-image area and rotate the focus ring until the three parts of the split image are correctly aligned. The camera heightens high-contrast outlines.
INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE POINT is selected for AF MODE and SPOT is selected for PHOTOMETRY. Options ON OFF 6 INSTANT AF SETTING The Shooting Menus Choose whether the camera focuses using single AF (AF-S) or continuous AF (AF-C) when the AF-L button is pressed in manual focus mode.
AF/MF SETTING DEPTH-OF-FIELD SCALE Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. Options PIXEL BASIS FILM FORMAT BASIS Option RELEASE FOCUS Description Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus.
TOUCH SCREEN MODE Choose the shooting operations performed using touch controls. Still Photography Mode TOUCH SHOOTING AF 6 Description Tap your subject in the display to focus and release the shutter. In burst mode, pictures will be taken while you keep your finger on the display. The Shooting Menus Tap to select a focus point. In focus mode S (AF-S), focus will lock, while in focus mode C (AF-C), the camera will continually adjust focus in response to changes in the distance to the subject.
AF/MF SETTING Movie Recording N We recommend that you select AREA for MOVIE AF MODE in the shooting menu B (movie) tab before recording movies using touch controls (in some movie modes, AREA will be selected automatically). Mode 145 6 The Shooting Menus Description Tap your subject in the display to focus and start TOUCH SHOOTING recording.
AF/MF SETTING Mode AREA OFF Description Tap to select a focus point and press the shutter button to start or end recording. In focus mode C (AF-C), the camera will continually adjust focus in response to changes in the distance to the subject in the selected focus point. In focus mode S (AF-S), you can move the focus point by tapping the display, but can only refocus using the control to which AF-ON has been assigned (P 225). Touch controls off. The display does not respond when tapped.
A SHOOTING SETTING Adjust shooting options. To display shooting options, press MENU/OK in the shooting display and select the A (SHOOTING SETTING) tab. SHOOTING SETTING SCENE POSITION DRIVE SETTING SELF-TIMER INTERVAL TIMER SHOOTING PHOTOMETRY SHUTTER TYPE IS MODE ISO EXIT N The options available vary with the shooting mode selected. SCENE POSITION Choose the mode selected when the drive dial is rotated to S and the auto mode selector lever is rotated 6 to AUTO.
Mode H NIGHT (TRIPOD) p FIREWORKS 6 The Shooting Menus Description Choose this mode for slow shutter speeds when shooting at night. Slow shutter speeds are used to capture the expanding burst of light from a firework. Q SUNSET Choose this mode to record the vivid colors in sunrises and sunsets. R SNOW Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow. s BEACH Choose for crisp, clear shots that capture the brightness of sunlit beaches.
SHOOTING SETTING DRIVE SETTING Adjust settings for the various drive modes. 149 6 The Shooting Menus Option Description BKT1 SETTING Choose the settings used when the drive dial is rotated BKT2 SETTING to BKT1 or BKT2 (P 150). Select the frame rate used when the drive dial is roCH HIGH tated to CH (continuous high speed): 14, 11, or 8 fps. SPEED BURST Note that 14fps and 11fps are available only with the electronic shutter.
BKT SETTING Choose bracketing settings for the BKT1 and BKT2 positions on the drive dial. Use BKT SELECT to choose a bracketing type and the AE BKT, ISO BKT, FILM SIMULATION BKT, and WHITE BALANCE BKT options to choose the bracketing amount for each type. Option 6 The Shooting Menus Description Choose from O AE BKT, W ISO BKT, X FILM SIMULATION BKT, H WHITE BALANCE BKT SELECT BKT, and Y DYNAMIC RANGE BKT. AE BKT Choose from ±1⁄3, ±2⁄3, ±1, ±11⁄3, ±12⁄3, and ±2. ISO BKT Choose from ±1⁄3, ±2⁄3, and ±1.
SHOOTING SETTING SELF-TIMER Choose a shutter release delay. Option Description The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera R 2 SEC moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down. The shutter is released ten seconds after the shutter button is pressed. Use for photographs in which you wish to S 10 SEC appear yourself. The self-timer lamp blinks immediately before the picture is taken.
INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. 1 Highlight INTERVAL TIMER SHOOTING in the A (SHOOTING SETTING) tab and press MENU/OK. 2 Use the selector to choose the interval and number of shots. Press MENU/OK to proceed. INTERVAL/NUMBER OF TIMES INTERVAL NUMBER OF TIMES END CANCEL START WAITING TIME LATER ESTIMATED START TIME 11 : 00 PM START 6 3 The Shooting Menus Use the selector to choose the starting time and then press MENU/OK.
SHOOTING SETTING O Interval timer photography can not be used at a shutter speed of B (bulb) or with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N Use of a tripod is recommended. Check the battery level before starting. We recommend using an optional AC-9V AC power adapter and CP-W126 DC coupler. The display turns off between shots and lights a few seconds before the next shot is taken.
PHOTOMETRY Choose how the camera meters exposure. O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is OFF. Mode Description The camera instantly determines exposure based on an o analysis of composition, color, and brightness distribu(multi) tion. Recommended in most situations. 6 The Shooting Menus p The camera meters the entire frame but assigns the (centergreatest weight to the area at the center.
SHOOTING SETTING SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option t MECHANICAL SHUTTER s ELECTRONIC SHUTTER t MECHANICAL + s ELECTRONIC Description Take pictures with the mechanical shutter. Take pictures with the electronic shutter. The camera chooses the shutter type according to shooting conditions.
IS MODE Reduce blur. Option Description l CONTINUOUS Image stabilization on. Image stabilization enabled only when the shutter m SHOOTING button is pressed halfway (focus mode C) or the ONLY shutter is released. Image stabilization off ; x appears in the display. OFF Recommended when the camera is on a tripod. N This option is available only with lenses that support image stabilization.
SHOOTING SETTING ISO Adjust the camera’s sensitivity to light. Option AUTO1 AUTO2 AUTO3 Description Sensitivity is automatically adjusted in response to shooting conditions. Adjust sensitivity manually. Selected value is shown in display. Choose for special situations. Note that mottling H (25600 or 51200), may appear in pictures taken at H, while L reduces L (100) dynamic range. 12800–200 N Sensitivity is not reset when the camera is turned off.
AUTO Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Defaults are shown below. Option DEFAULT SENSITIVITY MAX. SENSITIVITY MIN.
SHOOTING SETTING N If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. If AUTO is selected for MIN.
MOUNT ADAPTOR SETTING Adjust settings for M-mount lenses connected using an optional FUJIFILM M MOUNT ADAPTER. Choosing a Focal Length If the lens has a focal length of 21, 24, 28, or 35 mm, choose a matching option in the MOUNT ADAPTOR SETTING menu. For other lenses, select option 5 or 6 and use the selector to enter the focal length.
SHOOTING SETTING Distortion Correction Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION distortion. Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. LENS5 DISTORTION CORRECTION BARREL STRONG BARREL MEDIUM BARREL WEAK OFF PINCUSHION WEAK PINCUSHION MEDIUM PINCUSHION STRONG NEXT SET To use color shading correction, follow the steps below. Rotate the rear command dial to choose a corner.
Peripheral Illumination Correction Choose from values between –5 and +5. Choosing positive values increases peripheral illumination, while choosing negative values reduces peripheral illumination. Positive values are recommended for vintage lenses, negative values to create the effect of images taken with an antique lens or a pinhole camera. SET CANCEL N To determine the amount required, adjust peripheral il- lumination correction while taking photos of blue sky or a sheet of gray paper.
SHOOTING SETTING WIRELESS COMMUNICATION Connect to smartphones running the “FUJIFILM Camera Remote” app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. N For downloads and other information, visit: http://fujifilm-dsc.
F FLASH SETTING Adjust flash-related settings. To display flash-related settings, press MENU/OK in the shooting display and select the F (FLASH SETTING) tab. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT N The options available vary with the shooting mode selected. 6 FLASH FUNCTION SETTING The Shooting Menus Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash.
FLASH SETTING RED EYE REMOVAL Remove red-eye effects caused by the flash. Option FLASH + REMOVAL FLASH REMOVAL OFF Description A red-eye reduction pre-flash is combined with digital red-eye removal. Flash red-eye reduction only. Digital red-eye removal only. Flash red-eye reduction and digital red-eye removal off. N Flash red-eye reduction can be used in TTL flash control mode. Digital red-eye removal is performed only when a face is detected and is not available with RAW images.
TTL-LOCK MODE Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs. Option Description Flash output is locked at the value metered for LOCK WITH LAST the most recent photo. An error message will be FLASH displayed if no previously metered value exists. LOCK WITH The camera emits a series of pre-flashes and METERING FLASH locks flash output at the metered value.
FLASH SETTING LED LIGHT SETTING Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos. Option CATCHLIGHT AF ASSIST AF ASSIST + CATCHLIGHT OFF Role of LED video light in still photography Catchlight AF-assist illuminator AF-assist illuminator and catchlight None N This option can also be accessed via the flash settings menu.
FLASH SETTING CH SETTING Choose the channel used for communication between the master flash and remote flash units when using FUJIFILM optical wireless flash control. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.
B MOVIE SETTING Adjust movie-recording options. To display options for movie recording, press MENU/OK in the shooting display and select the B (MOVIE SETTING) tab. MOVIE SETTING MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY 4K MOVIE OUTPUT HDMI REC CONTROL MIC LEVEL ADJUSTMENT MIC/REMOTE RELEASE EXIT N The options available vary with the shooting mode selected. MOVIE MODE Choose a frame size and rate for movie recording. Frame size 3840 × 2160 (4K) 1920 × 1080 (Full HD) 1280 × 720 (HD) Rate 29.
MOVIE AF MODE Choose how the camera selects the focus point for movie recording. Option Description MULTI Automatic focus-point selection. AREA The camera focuses on the subject in the selected focus area. 6 HDMI OUTPUT INFO DISPLAY The Shooting Menus If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display.
MOVIE SETTING 4K MOVIE OUTPUT Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K. Option Description 4K movies are recorded to a camera memory card in 4K b CARD and output to the HDMI device in Full HD. 4K movies are output to the HDMI device in 4K, starting HDMI when the shutter button is pressed. The camera does not record 4K movies to a memory card.
MOVIE SETTING MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in and external microphones. MIC LEVEL ADJUSTMENT SET CANCEL Option Description 4—1 Choose a recording level. N Displays shows the peak recording level detected in a given period. 6 You can assign MIC LEVEL ADJUSTMENT to a camera control and then using the control to adjust the microphone level during recording.
Playback and the Playback Menu 173
The Playback Display This section lists the indicators that may be displayed during playback. Playback and the Playback Menu O For illustrative purposes, displays are shown with all indicators lit. 12.31.
The Playback Display Playback and the Playback Menu A Date and time........................44, 202 M Image size/quality ..............115, 116 B Face detection indicator ............138 N Film simulation ............................118 C Red-eye removal indicator O Dynamic range ............................121 ..................................................165, 190 P White balance ..............................122 D Advanced filter................................ 99 Q Sensitivity .......................
The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Playback and the Playback Menu Standard Information off 12/31/2050 10:00 AM 12/31/2050 10:00 AM 12/31/2050 10:00 AM +21/3 7 FAVORITES Favorites Info display Favorites: Rating Pictures To rate the current picture, press DISP/BACK and press the selector up and down to select from zero to five stars.
The Playback Display Viewing Photo Information The photo information display changes each time the selector is pressed up. Basic data 12/31/2050 10:00 AM 23.0mm F5.6 23.0mm sRGB ON Playback and the Playback Menu LENS FOCAL LENGTH COLOR SPACE LENS MODULATION OPT. 12/31/2050 10:00 AM +21/3 S.S 1/12000 F 5.6 ISO 51200 +21/3 NEXT Info display 2 Info display 1 Zooming in on the Focus Point Press the center of the rear command dial to zoom in on the focus point.
Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Playback and the Playback Menu Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback.
Viewing Pictures N The maximum zoom ratio varies with the option select- ed for H IMAGE QUALITY SETTING > IMAGE SIZE. Playback zoom is not available with cropped or resized copies saved at a size of a. Scroll When the picture is zoomed in, the selector can be used to view areas of the image not currently visible in the display. Navigation window Multi-Frame Playback To change the number of images displayed, rotate the rear command dial left when a picture is displayed full frame.
C The Playback Menu Adjust playback settings. Playback and the Playback Menu The playback menu is displayed when you press MENU/OK in playback mode. PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVA WIRELESS COMMUNICATION EXIT RAW CONVERSION RAW pictures store information on camera settings separately from the data captured by the camera image sensor.
The Playback Menu 2 RAW CONVERSION REFLECT SHOOTING COND. PUSH/PULL PROCESSING DYNAMIC RANGE FILM SIMULATION GRAIN EFFECT WHITE BALANCE CREATE CANCEL N These options can also be displayed by pressing the Q button during playback. 3 Press the selector up or down to highlight a setting and press the selector right to display opWB tions. Press the selector up or down to highlight the desired option and press MENU/OK to select and return to the settings list.
The settings that can be adjusted when converting pictures from RAW to JPEG are: Playback and the Playback Menu 7 Setting Description REFLECT Create a JPEG copy using the settings in effect at SHOOTING COND. the time the photo was taken. PUSH/PULL Adjust exposure. PROCESSING Enhance details in highlights for natural conDYNAMIC RANGE trast. FILM SIMULATION Simulate the effects of different types of film. GRAIN EFFECT Add a film grain effect. WHITE BALANCE Adjust white balance. WB SHIFT Fine-tune white balance.
The Playback Menu ERASE Delete individual pictures, multiple selected pictures, or all pictures. pictures or copy them to a computer or other storage device before proceeding. Option Description FRAME Delete pictures one at a time. SELECTED FRAMES Delete multiple selected pictures. ALL FRAMES Delete all unprotected pictures. FRAME 1 Select FRAME for ERASE in the playback menu. 2 Playback and the Playback Menu O Deleted pictures can not be recovered.
SELECTED FRAMES 1 Select SELECTED FRAMES for ERASE in the playback menu. Playback and the Playback Menu 2 Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or printer orders are shown by S). Selected pictures are indicated by check marks (R). 3 When the operation is complete, press DISP/BACK to display a confirmation dialog. 4 Highlight OK and press MENU/OK to delete the selected pictures.
The Playback Menu ALL FRAMES 1 Select ALL FRAMES for ERASE in the playback menu. A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures. N Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not be recovered. If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures.
CROP Create a cropped copy of the current picture. Playback and the Playback Menu 7 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Select CROP in the playback menu. Use the rear command dial to zoom in and out and press the selector up, down, left, or right to scroll the picture until the desired portion is displayed. Press MENU/OK again to save the cropped copy to a separate file. N Larger crops produce larger copies; all copies have an aspect ratio of 3∶2.
The Playback Menu RESIZE Create a small copy of the current picture. Display the desired picture. 4 Press MENU/OK again to save the resized copy to a separate file. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confirmation dialog. N The sizes available vary with the size of the original image.
Playback and the Playback Menu PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. • FRAME: Protect selected pictures. Press the selector left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. • SET ALL: Protect all pictures. • RESET ALL: Remove protection from all pictures. O Protected pictures will be deleted when the memory card is formatted.
The Playback Menu IMAGE ROTATE Rotate pictures. Display the desired picture. 4 Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera. Select IMAGE ROTATE in the playback menu. Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. N Protected pictures can not be rotated. Remove protection before rotating pictures.
RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. Playback and the Playback Menu 7 1 2 3 Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK. N Results vary depending on the scene and the camera’s success in detecting faces.
The Playback Menu N For downloads and other information, visit: http://fujifilm-dsc.com/wifi/ Playback and the Playback Menu WIRELESS COMMUNICATION Connect to smartphones running the “FUJIFILM Camera Remote” app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. SLIDE SHOW View pictures in an automated slide show. Press 7 MENU/OK to start and press the selector right or left to skip ahead or back.
PHOTOBOOK ASSIST Create books from your favorite photos. Playback and the Playback Menu Creating a Photobook 1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. 2 Scroll through the images and press the selector up to select or deselect. Press MENU/OK to exit when the book is complete. N Neither photographs a or smaller nor movies can be selected for photobooks. The first picture selected becomes the cover image. Press the selector down to select the current image for the cover instead.
The Playback Menu Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the selector left or right to scroll through the pictures. Playback and the Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book.
Playback and the Playback Menu PC AUTO SAVE Upload pictures from the camera to a computer running the “FUJIFILM PC AutoSave” application (note that you must first install the software and configure the computer as a destination for images copied from the camera). N For downloads and other information, visit: http://fujifilm-dsc.
The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. Select C PLAY BACK MENU > PRINT ORDER (DPOF). 2 Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding. 3 Display a picture you wish to include in or remove from the print order. 4 Press the selector up or down to choose the number of copies (up to 99).
N The pictures in the current print order are indicated by a u icon during playback. Print orders can contain a maximum of 999 pictures. Playback and the Playback Menu If a memory card is inserted containing a print order created by another camera, a message will be displayed. Pressing MENU/OK cancels the print order; a new print order must be created as described above.
The Playback Menu 1 2 Turn the printer on. Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING TO PRINTER FUJIFILM-CAMERA-1234 CANCEL N To print a frame from a burst sequence, display the frame before selecting instax PRINTER PRINT. 3 Use the selector to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start.
The Playback Menu Playback and the Playback Menu 7 DISP ASPECT Choose how High Definition (HD) devices display pictures with an aspect ratio of 3∶2 (this option is available only when an HDMI cable is connected). Select 16∶9 to display the image so that it fills the screen with its top and bottom cropped out, 3∶2 to display the entire image with black bands at either side.
The Setup Menus 199
D USER SETTING Adjust basic camera settings. To access basic camera settings, press MENU/OK, select the D (SET UP) tab, and choose USER SETTING.
USER SETTING FORMAT To format a memory card: 1 Select D USER SETTING > FORMAT in the D (SET UP) tab. 2 A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. To exit without formatting the memory card, select CANCEL or press DISP/BACK. FORMAT FORMAT CARD IN SLOT 1, OK? ERASE ALL DATA OK CANCEL ed from the memory card. Be sure important files have been copied to a computer or other storage device. Do not open the battery-chamber cover during formatting.
DATE/TIME To set the camera clock: The Setup Menus 1 Select D USER SETTING > DATE/TIME in the D (SET UP) tab. 2 Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down. 3 Press MENU/OK to set the clock.
USER SETTING TIME DIFFERENCE Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between your local and home time zone: 1 2 Highlight g LOCAL and press MENU/OK. Use the selector to choose the time difference between local time and your home time zone. Press MENU/OK when settings are complete. To set the camera clock to local time, highlight g LOCAL and press MENU/OK.
a Choose a language. The Setup Menus 8 MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used options. 1 Highlight D USER SETTING > MY MENU SETTING in the D (SET UP) tab and press MENU/OK to display the options at right.
USER SETTING 2 Press the selector up or down to highlight MY MENU SETTING and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. MY MENU SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE SELECT CANCEL N Items currently in “my menu” are indicated by check marks. 3 Highlight an item and press MENU/OK to add it to “my menu”.
SENSOR CLEANING Remove dust from the camera image sensor. • OK: Clean the sensor immediately. • WHEN SWITCHED ON: Sensor cleaning will be performed when the camera is turned on. • WHEN SWITCHED OFF: Sensor cleaning will be performed when the camera turns off (sensor cleaning is not however performed if the camera turns off in playback mode). The Setup Menus N Dust that can not be removed using sensor cleaning can be removed manually.
USER SETTING RESET Reset shooting or setup menu options to default values. Custom white balance, custom settings banks created using EDIT/SAVE CUSTOM SETTING, WIRELESS SETTINGS, and the setup menu DATE/ TIME and TIME DIFFERENCE options are not affected. Highlight the desired option and press the selector right. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK.
D SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, select the D (SET UP) tab, and choose SOUND SETTING. SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME The Setup Menus AF BEEP VOL. Choose the volume of the beep that sounds when the camera focuses. The beep can be muted by se8 lecting f.
SOUND SETTING SELF-TIMER BEEP VOL. Choose the volume of the beep that sounds while the self-timer is active. The beep can be muted by selecting f. b (high) Options c (medium) d (low) f (mute) The Setup Menus OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose f to dis8 able control sounds.
SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose f to disable the shutter sound. b (high) The Setup Menus 8 Options c (medium) d (low) f (mute) SHUTTER SOUND Choose the sound made by the electronic shutter.
SOUND SETTING PLAYBACK VOLUME Adjust the volume for movie playback. Choose from 10 options between 10 (high) and 1 (low) or select OFF to mute audio during movie playback.
D SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SETTING. SCREEN SETTING EVF BRIGHTNESS EVF COLOR LCD BRIGHTNESS LCD COLOR IMAGE DISP. EVF AUTOROTATE DISPLAYS PREVIEW EXP./WB IN MANUAL MODE PREVIEW PIC. EFFECT The Setup Menus EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder.
SCREEN SETTING EVF COLOR Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5. +5 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 −5 +5 +4 +3 +2 Options +1 0 −1 −2 −3 −4 −5 213 The Setup Menus LCD BRIGHTNESS Adjust monitor brightness. Choose from 11 options between +5 and −5.
LCD COLOR Adjust monitor hue. Choose from 11 options between +5 and −5. +5 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 −5 The Setup Menus IMAGE DISP. Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image 8 and “noise” mottling may be visible at high sensitivities. Option Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway.
SCREEN SETTING EVF AUTOROTATE DISPLAYS Choose whether the indicators in the viewfinder rotate to match camera orientation. Regardless of the option selected, the indicators in the monitor do not rotate. Options ON OFF The Setup Menus PREVIEW EXP./WB IN MANUAL MODE Select PREVIEW EXP.
PREVIEW PIC. EFFECT Choose ON to preview the effects of film simulation, white balance, and other settings in the monitor, OFF to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Options ON OFF N If OFF is selected, the effects of camera settings will not The Setup Menus be visible in the monitor and colors and tone will differ from those in the final picture.
SCREEN SETTING FRAMING GUIDELINE Choose a framing grid for shooting mode. Option G GRID 24 F GRID 9 Display P P P For “rule of thirds” composition. H HD FRAMING A six-by-four grid. N Framing guides are not shown at default settings but can be displayed using D SCREEN SETTING > DISP. CUSTOM SETTING (P 219). The Setup Menus Frame HD pictures in the crop shown by the lines at the top and bottom of the display.
AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON The Setup Menus 8 OFF FOCUS SCALE UNITS Choose the units used for the focus distance indicator.
SCREEN SETTING DISP. CUSTOM SETTING Choose the items shown in the standard display. 1 In shooting mode, use the DISP/BACK button to display standard indicators. 2 Press MENU/OK and select D SCREEN SETTING > DISP. CUSTOM SETTING in the D (SET UP) tab. 3 Highlight items and press MENU/OK to select or deselect. Item SHUTTER TYPE FLASH CONTINUOUS MODE DUAL IS MODE TOUCH SCREEN MODE WHITE BALANCE FILM SIMULATION DYNAMIC RANGE FRAMES REMAINING IMAGE SIZE/QUALITY MOVIE MODE & REC.
SCREEN SETTING 4 5 Press DISP/BACK to save changes. Press DISP/BACK as needed to exit the menus and return to the shooting display.
D BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING.
EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu. The Setup Menus 8 1 Select D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the D (SET UP) tab. 2 The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position.
BUTTON/DIAL SETTING N 4 Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE. Highlight the desired item and press MENU/OK to assign it to the selected position. N The quick menu can also be accessed in shooting mode by holding the Q button.
Fn/AE-L/AF-L BUTTON SETTING Choose the roles played by the function buttons. The Setup Menus 8 1 Select D BUTTON/DIAL SETTING > Fn/AE-L/ AF-L BUTTON SETTING in the D (SET UP) tab. 2 3 Highlight the desired control and press MENU/OK. Highlight any of the following options and press MENU/OK to assign it to the selected control.
BUTTON/DIAL SETTING N Function button assignment options can also be accessed by holding the DISP/BACK button. The selector can not be assigned more than one role at a time. AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway. The Setup Menus MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).
SELECTOR BUTTON SETTING Choose the roles played by the up, down, left, and right buttons on the selector. Option Description Fn BUTTON The selector buttons serve as function buttons. The selector buttons can be used to position the focus FOCUS AREA area. N Selecting FOCUS AREA prevents you accessing the functions assigned to the function buttons. The Setup Menus 8 COMMAND DIAL SETTING Choose the roles played by the command dials.
BUTTON/DIAL SETTING SHUTTER AF Choose whether the camera focuses when the shutter button is pressed halfway. Option Description In focus mode S (AF-S), the camera focuses when the shutter button is pressed halfway and locks focus while the button ON remains in this position. In focus mode C (AF-C), focus is adjusted continually while the button is pressed halfway. The camera does not focus when the shutter button is OFF pressed halfway.
SHOOT WITHOUT LENS Choose ON to enable the shutter release when no lens is attached. Options ON The Setup Menus 8 OFF FOCUS RING Choose the direction in which the focus ring is rotated to increase the focus distance.
BUTTON/DIAL SETTING AE/AF-LOCK MODE If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AE-L or AF-L button is pressed. If AE & AF ON/OFF SWITCH is selected, exposure and/or focus will lock when the AE-L or AF-L button is pressed and remain locked until the button is pressed again. Options AE & AF ON WHEN PRESSING AE & AF ON/OFF SWITCH Option Description AUTO + Rotate the front command dial to choose the aperture. o MANUAL Rotate past minimum aperture to choose A (auto).
BUTTON/DIAL SETTING TOUCH SCREEN SETTING Enable or disable touch-screen controls.
D POWER MANAGEMENT Adjust power management settings. To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT. POWER MANAGEMENT AUTO POWER OFF PERFORMANCE The Setup Menus AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, 8 the camera must be turned off manually.
POWER MANAGEMENT PERFORMANCE Adjust power management settings. Option HIGH PERFORMANCE STANDARD AF performance LCD/EVF display (speed) quality Battery endurance Fast Very high Low Normal High Normal N When STANDARD is selected, the frame rate will drop when no operations are being performed. Operating camera controls returns the frame rate to normal.
D SAVE DATA SETTING Make changes to file management settings. To access file management settings, press MENU/OK, select the D (SET UP) tab, and choose SAVE DATA SETTING. SAVE DATA SETTING FRAME NO.
FRAME NO. Frame number New pictures are stored in image files named using a four-digit file number assigned by adding one File to the last file number used. The Directory number number file number is displayed during playback as shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted.
SAVE DATA SETTING SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options ON OFF The Setup Menus EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”) preceded by an under- 8 score.
SAVE DATA SETTING COPYRIGHT INFO Copyright information, in the form of Exif tags, can be added to new images as they taken. Changes to copyright information are reflected only in images taken after the changes are made. The Setup Menus Option Description DISP COPYRIGHT INFO View the current copyright information. ENTER AUTHOR'S INFO Enter the creator’s name. ENTER COPYRIGHT Enter the name of the copyright holder. INFO Delete the current copyright information.
D CONNECTION SETTING Adjust settings for connection to other devices. To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING.
PC AUTO SAVE SETTING Choose an upload destination. Choose SIMPLE SETUP to connect using WPS, MANUAL SETUP to configure network settings manually. Options SIMPLE SETUP MANUAL SETUP N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ The Setup Menus 8 GEOTAGGING SET-UP View location data downloaded from a smartphone and choose whether to save the data with your pictures.
CONNECTION SETTING instax PRINTER CONNECTION SETTING Adjust settings for connection to optional FUJIFILM instax SHARE printers. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
MEMO 240
Shortcuts 241
Shortcut Options Customize camera controls to suit your style or situation. Shortcuts Frequently-used options can be added to the Q menu or a custom “my” menu or assigned to an Fn (function) button for direct access: • The Q menu (P 243): The Q menu is displayed by pressing the Q button. Use the Q menu to view or change the options selected for frequently-used menu items.
The Q (Quick Menu) Button Press Q for quick access to selected options.
The quick menu shows the options currently selected for items B–P, which can be changed as described on page 246. SELECT CUSTOM SETTING The H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING item (item A) shows the current custom settings bank: • q: No custom settings bank selected. • t–u: Select a bank to view the settings saved using the H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING option. • r–s: The current custom settings bank.
The Q (Quick Menu) Button Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 Use the selector to highlight items and rotate the rear command dial to change. N Changes are not saved to the SELECT CUSTOM SETTING BASE SET current settings bank. Settings that differ from those in the current settings bank (t– u) are shown in red. Shortcuts 3 Press Q to exit when settings are complete.
Editing the Quick Menu To choose the items displayed in the quick menu: 1 Press and hold the Q button during shooting. 2 The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK.
The Q (Quick Menu) Button 3 Highlight any of the following options and press MENU/OK to assign it to the selected position. * * * * * * * * * * • MF ASSIST • SELF-TIMER • PHOTOMETRY • SHUTTER TYPE • ISO • TOUCH SCREEN MODE • FLASH FUNCTION SETTING • FLASH COMPENSATION • MOVIE MODE • MIC LEVEL ADJUSTMENT • SOUND & FLASH • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE * Stored in custom settings bank. N Select NONE to assign no option to the select- ed position.
The Fn (Function) Buttons The roles played by each of the function buttons can be selected by pressing and holding the button.
The Fn (Function) Buttons AF-L button Center of rear command dial Focus lock Focus check Shortcuts 9 249
Assigning Roles to the Function Buttons To assign roles to the buttons: Shortcuts 9 1 Press and hold the DISP/BACK button until a button selection menu is displayed. 2 3 Highlight a button and press MENU/OK. Highlight the desired role and press MENU/OK to assign it to the selected button.
The Fn (Function) Buttons N Button assignments can also be selected using D BUTTON/DIAL SETTING > Fn/AE-L/AF-L BUTTON SETTING. The selector can not be assigned more than one role at a time. AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway. MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).
E MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the shooting display and select the E (MY MENU) tab. MY MENU SELF-TIMER INTERVAL TIMER SHOOTING FILM SIMULATION GRAIN EFFECT SHUTTER TYPE IS MODE FACE/EYE DETECTION SETTING ISO EXIT N The E tab is only available if options have been assigned to MY MENU.
MY MENU 3 Highlight an item and press MENU/OK to add it to “my menu”. MY MENU SETTING 1 IMAGE SIZE MOVE 4 5 SAVE Press MENU/OK to return to the edit display. Repeat Steps 3 and 4 until all the desired items have been added. N “My menu” can contain up to 16 items. Editing “My Menu” To reorder or delete items, select RANK ITEMS or REMOVE ITEMS in Step 1.
MEMO 254
Peripherals and Optional Accessories 255
External Flash Units Flash units can be mounted on the hot shoe or connected via the sync terminal. Peripherals and Optional Accessories External flash units are more powerful than their built-in counterparts. Some support high-speed sync (FP) and can be used at shutter speeds faster than the sync speed, while others can function as master flash units controlling remote units via optical wireless flash control.
External Flash Units Flash Settings To adjust settings for a flash unit mounted on the hot shoe or connected via the sync terminal: 1 2 Connect the unit to the camera. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT Menu Description P Built-In Displayed when the built-in flash is raised. 107 Flash SHOE Displayed when an optional flash unit is MOUNT 262 mounted on the hot shoe and turned on.
3 Highlight items using the selector and rotate the rear command dial to change the highlighted setting. 4 Press DISP/BACK to put the changes into effect. MODE Built-In Flash ADJUST END Peripherals and Optional Accessories Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is ON.
External Flash Units SYNC TERMINAL SYNC TERMINAL is displayed if the built-in flash is lowered and either no flash unit, or an incompatible flash unit, is mounted on the hot shoe. MODE SYNC TERMINAL ADJUST END Setting Peripherals and Optional Accessories Description Choose from the following options: • M: A trigger signal is transmitted from the sync terminal and hot shoe when a picture is taken.
BUILT-IN FLASH The following options are available with the built-in flash. MODE Built-In Flash ADJUST Setting Peripherals and Optional Accessories 10 END Description Choose from the following options: • TTL: TTL mode. Adjust flash compensation (B) and choose a flash mode (C). • M: The flash fires at the selected output (B) regardless of subject brightness or camera settings. Output is expressed in fractions of full power, A Flash control from ⁄ to ⁄.
External Flash Units Setting C Flash mode D Sync 261 Peripherals and Optional Accessories (TTL) Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
SHOE MOUNT FLASH The following options are available with optional shoe-mounted flash units. MODE SHOE MOUNT FLASH ADJUST Setting Peripherals and Optional Accessories A Flash control mode 10 262 END Description The flash control mode selected with the flash unit. This can in some cases be adjusted from the camera; the options available vary with the flash. • TTL: TTL mode. Adjust flash compensation (B). • M: The flash fires at the selected output regardless of subject brightness or camera settings.
External Flash Units Setting Peripherals and Optional Accessories Description The options available vary with flash control mode. • TTL: Adjust flash compensation (the full value may not be applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit. B Flash compen- • M/MULTI: Adjust flash output (compatible units sation/output only).
Setting C Flash mode Peripherals and Optional Accessories 10 (TTL) D Sync 264 Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
External Flash Units Setting 265 Peripherals and Optional Accessories Description The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is E Zoom selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. F Lighting • K (STANDARD): Match coverage to picture angle.
MASTER(OPTICAL) The options at right will be displayed if the unit is currently functioning as master flash for FUJIFILM optical wireless remote flash control. MODE MASTER(OPTICAL) ADJUST END Peripherals and Optional Accessories The master and remote units can be placed in up to three C groups (A, B, and C) and flash A mode and flash level adjusted separately for each group.
External Flash Units Setting A Flash control mode (group A) B Flash control C Flash control mode (group C) Peripherals and Optional Accessories mode (group B) Description Choose flash control modes for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group.
Setting D Flash compen- Peripherals and Optional Accessories 10 Description Adjust flash level for the selected group according sation/output to option selected for flash control mode. Note (group A) that the full value may not be applied if the limits E Flash compen- of the flash control system are exceeded. sation/output • TTL: Adjust flash compensation. (group B) • M/MULTI: Adjust flash output.
External Flash Units Setting H Sync J Lighting 269 Peripherals and Optional Accessories I Zoom Description Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • AUTO FP(HSS): High-speed sync (compatible units only). The camera automatically engages front-curtain high-speed sync at shutter speeds faster than the flash sync speed.
External Flash Units Setting K Master K Number of Peripherals and Optional Accessories flashes L Channel L Frequency 10 270 Description Assign the master flash to group A (Gr A), B (Gr B), or C (Gr C). If OFF is selected, output from the master flash will be held to a level that does not affect the final picture. Available only if the unit is mounted on the camera hot shoe as a master flash for FUJIFILM optical wireless remote flash control in TTL, TTL%, or M mode.
Lenses The camera can be used with lenses for the FUJIFILM X-mount. Lens Parts Peripherals and Optional Accessories A Lens hood B Mounting marks C Focus ring D Zoom ring E Aperture ring F O.I.S.
Removing Lens Caps Remove lens caps as shown. N Lens caps may differ from those shown. Peripherals and Optional Accessories Attaching Lens Hoods When attached, lens hoods reduce glare and protect the front lens element.
Lenses Lenses with Aperture Rings At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M). N A 16 11 8 5.6 4 2.8 A 16 11 8 5.6 4 When the aperture ring is set to A, Aperture ring rotate the front command dial to adjust aperture.
Lenses with No Aperture Rings The method used to adjust aperture can be selected using D BUTTON/ DIAL SETTING > APERTURE SETTING. When an option other than AUTO is selected, aperture can be adjusted using the front command dial. Peripherals and Optional Accessories N Aperture control defaults to the front command dial, but can be reassigned to the rear command dial using D BUTTON/DIAL SETTING > COMMAND DIAL SETTING. Lenses with O.I.S. Switches If the lens supports optical image stabilization (O.I.S.
Lenses Manual Focus Lenses Slide the focus ring to the front for autofocus. The Depth-of-Field Indicator The depth-of-field indicator shows the approximate depth of field (the distance in front of and behind the focus point that appears to be in focus). The indicator is displayed in film format. O Note that manual focus may not be available in all shooting modes.
Lenses Lens Care Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. Replace the front and rear caps when the lens is not in use.
Connections 277
HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below, making sure the connectors are fully inserted. Insert into HDMI connector Connections 11 Insert into HDMI Micro connector (Type D) O Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
HDMI Output 4 Turn the camera on. You can now shoot and play back pictures while viewing the television display and save pictures to the HDMI device. O The USB cable can not be used while an HDMI cable is connected. Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. N This feature can be used to save 4K and Full HD movies to an HDMI recorder. Playback To start playback, press the camera a button.
Wireless Transfer Access wireless networks and connect to computers, smartphones, or tablets. For downloads and other information, visit: http://fujifilm-dsc.com/wifi/ fujifilm Wi-Fi app Connections Wireless Connections: Smartphones Install the “FUJIFILM Camera Remote” app on your smartphone to browse the images on the camera, download selected images, control the camera remotely, or copy location data to the camera.
Wireless Transfer Wireless Connections: Computers Once you have installed the “FUJIFILM PC AutoSave” application and configured your computer as a destination for the images copied from the camera, you can upload pictures from the camera using C PLAY BACK MENU > PC AUTO SAVE.
Connecting to Computers via USB Copy pictures to a computer via USB. Windows Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized, and printed. MyFinePix Studio is available for download from the following website: http://fujifilm-dsc.com/mfs/ fujifilm mfs Once download is complete, double-click the downloaded file (“MFPS_Setup.EXE”) and follow the onscreen instructions to complete installation.
Connecting to Computers via USB Mac OS X/macOS Pictures can be copied to your computer using Image Capture (supplied with your computer) or other software. Viewing RAW Files To view RAW files on your computer, use RAW FILE CONVERTER EX 2.0, available for download from: http://fujifilm-dsc.com/rfc/ fujifilm rfc Connecting the Camera 1 Find a memory card containing pictures you want to copy to the computer and insert the card into the camera. data or damage to the memory card.
Connections 11 2 Ready a third-party USB 2.0 cable with a Micro USB (Micro-B) connector. Turn the camera off and connect the cable, making sure the connectors are fully inserted. 3 4 Turn the camera on. 5 When transfer is complete, turn the camera off and disconnect the USB cable. Copy pictures to the computer using MyFinePix Studio or applications provided with your operating system.
Connecting to Computers via USB O If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer. Connect the camera directly to the computer; do not use a USB hub or keyboard.
instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. N 3 PRINTER PRINT instax-12345678 CONNECTING TO PRINTER FUJIFILM-CAMERA-1234 CANCEL To print a frame from a burst sequence, display the frame before selecting instax PRINTER PRINT. Use the selector to display the picture you want to print, then press MENU/OK.
MEMO 288
Technical Notes 289
Accessories from FUJIFILM The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/products/ digital_cameras/index.html. Rechargeable Li-ion batteries NP-W126/NP-W126S: Additional high-capacity NP-W126/ NP-W126S rechargeable batteries can be purchased as required. Battery chargers BC-W126: Replacement battery chargers can be purchased as required.
Accessories from FUJIFILM Stereo microphones MIC-ST1: An external microphone for movie recording. FUJINON lenses XF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. Technical Notes Shoe-mounted flash units EF-X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.
Shoe-mounted flash units (continued) EF-42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent). The flash head can be rotated 90° up, 180° left, or 120° right for bounce lighting. EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.).
Accessories from FUJIFILM Grip belts GB-001: Improves grip. Combine with a hand grip for more secure handling. Macro extension tubes MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios. Teleconverters XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×. XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×. Mount adapters FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating in• Read Instructions structions should be read before the appliance is operated. Instructions: The safety and operating in• Retain Instructions structions should be retained for future reference. Warnings: All warnings on the appliance and • Heed Warnings in the operating instructions should be adhered to. Follow Instructions Instructions: All operating and use instruc• tions should be followed.
For Your Safety An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Antennas Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.
Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. Safety Check: Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.
For Your Safety Do not touch internal parts WARNING Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation.
WARNING CAUTION When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover the battery terminals with insulation tape. Contact with other metallic objects or batteries could cause the battery to ignite or burst. Keep memory cards, hot shoes, and other small parts out of the reach of small children. Children may swallow small parts; keep out of reach of children.
For Your Safety The Battery and Power Supply Note: Check the type of battery used in your camera ■ Battery Life and read the appropriate sections. At normal temperatures, the battery can be reThe following describes the proper use of batter- charged about 300 times. A noticeable decrease ies and how to prolong their life.
AC Power Adapters (Available Separately) Use only FUJIFILM AC power adapters designated for use with this camera. Other adapters could damage the camera. • The AC power adapter is for indoor use only. • Be sure the DC plug is securely connected to the camera. • Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable. touch during use. This is normal. • If the adapter causes radio interference, reorient or relocate the receiving antenna.
For Your Safety Trademark Information Digital Split Image is a trademark or registered trademark of FUJIFILM Corporation. xD-Picture Card and E are trademarks of FUJIFILM Corporation. The typefaces included herein are solely developed by DynaComware Taiwan Inc. Macintosh, Mac OS, and macOS are trademarks of Apple Inc. in the U.S.A. and other countries. Windows is a registered trademark of Microsoft Corporation in the U.S.A. and other countries.
For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Technical Notes Contains IC : 7736B-02000003 Contains FCC ID : W2Z-02000003 FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For Your Safety This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe.
Be sure to read these notes before use Safety Notes WARNING • Make sure that you use the lens correctly. Read Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not place on unstable surfaces.
For Your Safety European Union Regulatory Notice This product complies with the following EU Directives: • RoHS Directive 2011/65/EU • RE Directive 2014/53/EU Hereby, FUJIFILM Corporation declares that the radio equipment type FF160006 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http:// www.fujifilm.com/products/digital_cameras/x/ fujifilm_x_t20/pdf/index/fujifilm_x_t20_cod.
For Your Safety Wireless Network Devices: Cautions • This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in RFID tracking systems for assembly lines and in other similar applications. • To prevent interference with the above devices, observe the following precautions.
Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth.
Cleaning the Image Sensor Dust that can not be removed using D USER SETTING > SENSOR CLEANING can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. O Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary.
Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: http://www.fujifilm.com/support/digital_cameras/ software fujifilm firmware Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. Turn the camera off and check that a memory card is inserted. 2 Turn the camera on while pressing the DISP/BACK button.
Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local FUJIFILM distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert Technical Notes 12 a fully-charged spare battery (P 32). The camera does • The battery is inserted incorrectly: Reinsert in the correct orientation (P 37). not turn on.
Troubleshooting Problem Solution The camera turns The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 32). off suddenly. Reinsert the battery in the correct orientation Charging does and make sure that the charger is plugged in not start. (P 32). Charging is slow. Charge the battery at room temperature. • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.
Problem Solution • The memory card is damaged: Insert a new memory card (P 36). No picture is taken when the shutter button is pressed (continued). • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 32). • The camera has turned off automatically: Turn the camera on (P 42). • You are using a third-party mount adapter: Select ON for SHOOT WITHOUT LENS (P 228).
Troubleshooting Problem Technical Notes Solution • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 138). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face No face is occupies a larger area of the frame (P 138). detected. • The subject’s head is tilted or horizontal: Ask the subject to hold their head straight (P 138). • The camera is tilted: Keep the camera level.
Problem Solution • The subject is not in range of the flash: Position the The flash does not fully light the subject. Some flash modes are not available. Pictures are blurred. Technical Notes Pictures are mottled. 12 314 subject in range of the flash. • The flash window is obstructed: Hold the camera correctly. • Shutter speed is faster than the sync speed: Choose a slower shutter speed (P 64, 72). OFF is selected for SOUND & FLASH: Select ON (P 206). • The lens is dirty: Clean the lens (P 276).
Troubleshooting Playback Technical Notes Problem Solution Pictures are The pictures were taken with a different make or grainy. model of camera. Playback zoom is The pictures were created using RESIZE or with a unavailable. different make or model of camera. • Playback volume is too low: Adjust playback volume (P 211). • The microphone was obstructed: Hold the camera correctly during recording. No sound in movie playback. • The speaker is obstructed: Hold the camera correctly during playback.
Connections Problem Technical Notes Solution The camera is connected to a TV: Pictures will be disThe monitor is played on the TV instead of in the camera monitor blank. (P 278). • The camera is not properly connected: Connect the camera properly (P 278). No picture or • Input on the television is set to “TV”: Set input to “HDMI” (P 278). sound on TV. • The volume on the TV is too low: Use the controls on the television to adjust the volume.
Troubleshooting Wireless Transfer For additional information on troubleshooting wireless connections, visit: http://digital-cameras.support. fujifilm.com/app?pid=x Problem Problem connecting or uploading pictures to smartphone. Solution • The smartphone is too far away: Move the devices closer (P 280). • Nearby devices are causing radio interference: Move 317 Technical Notes the camera and smartphone away from microwave ovens or cordless phones (P 280).
Troubleshooting Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinThe camera is unresponsive. sert the battery (P 36). • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 32). • The camera is connected to a wireless LAN: End the connection. The camera does Remove and reinsert the battery (P 36). If the not function as problem persists, contact your FUJIFILM dealer. expected. • Adjust the volume (P 208). No sound.
Warning Messages and Displays The following warnings appear in the display. Warning 319 Technical Notes Description Low battery. Charge the battery or insert a fuli (red) ly-charged spare battery. Battery exhausted. Charge the battery or insert a j (blinks red) fully-charged spare battery. s (displayed in The camera can not focus. Use focus lock to focus red with red focus on another subject at the same distance, then reframe) compose the picture.
Warning Description • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a FUJIFILM dealer. Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn LENS ERROR the camera on. If the problem persists, contact a FUJIFILM dealer. • The memory card is not formatted for use in the camera: Format the card.
Warning Messages and Displays Warning Description • Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. • The memory card is not formatted: Format the memory card. The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select RENEW for D SAVE FRAME NO. FULL DATA SETTING > FRAME NO.. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for FRAME NO..
Warning Messages and Displays Technical Notes Warning Description F CAN NOT Movies can not be rotated. ROTATE CAN NOT SET DPOF The picture can not be printed using DPOF. F CAN NOT SET Movies can not be printed using DPOF. DPOF F CANNOT Red-eye removal can not be applied to movies. EXECUTE Red-eye removal can not be applied to pictures crem CANNOT ated with other devices.
Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate. 8 GB 16 GB FINE NORMAL FINE NORMAL 540 800 1110 1660 RAW (UNCOMPRESSED) 150 320 RAW (LOSSLESS COMPRESSED) 310 640 9 minutes 20 minutes U2160/29.97P, 25P, 24P, 23.
Specifications System Model Product Number Effective pixels Image sensor Storage media Memory card slot File system File format Technical Notes 12 FUJIFILM X-T20 FF160006 Approx. 24.3 million 23.5 mm × 15.6 mm (APS-C), X-Trans CMOS III sensor with primary color filter FUJIFILM-recommended SD/SDHC/SDXC memory cards SD memory card slot Compliant with Design Rule for Camera File System (DCF), Exif 2.3, and Digital Print Order Format (DPOF) • Still pictures: Exif 2.
Specifications System Sensitivity • Still pictures: Standard output sensitivity equiv- alent to ISO 200 – 12800 in increments of ⁄ EV; AUTO; extended output sensitivity equivalent to ISO 100, 25600, or 51200 • Movies: Standard output sensitivity equivalent to ISO 200 – 12800 in increments of ⁄ EV Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE, CENTER WEIGHTED Exposure control Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; manual exposure Exp
System Continuous Frame rate 14 fps * 14 CH 11 fps* 11 8.0 8.0 fps 5.0 5.0 fps 4.0 CL 4.0 fps 3.0 3.0 fps * Available with electronic shutter only. Frames per burst Up to approximately 42 Up to approximately 50 Up to approximately 53 Up to approximately 56 Up to approximately 58 Up to approximately 62 O The frame rate varies with shooting conditions and the number of images recorded. In addition, the frame rate and number of frames per burst may vary depending on the type of memory card used.
Specifications System Flash mode • MODE: TTL MODE (FLASH AUTO, STANDARD, Technical Notes SLOW SYNC.), MANUAL, COMMANDER, SUPPRESSED FLASH • SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN • RED EYE REMOVAL: e FLASH+REMOVAL, L FLASH, d REMOVAL, OFF Hot shoe Accessory shoe with TTL contacts Sync contact X contact; supports sync speeds as fast as ⁄ s Sync terminal Provided Viewfinder 0.39-in., 2,360k-dot color OLED viewfinder with diopter adjustment (−4 to +2 m−1); magnification 0.
Input/output terminals Digital input/output USB 2.0 High-Speed Micro USB connector (Micro-B) HDMI output HDMI Micro connector (Type D) Microphone/remote ⌀2.5 mm 3-pole mini jack release connector Power supply/other Power supply NP-W126S rechargeable battery (supplied with camera) Camera size 118.4 mm × 82.8 mm × 41.4 mm (31.9 mm (W × H × D) excluding projections, measured at thinnest part)/ 4.7 in. × 3.3 in. × 1.6 in. (1.3 in.) Camera weight Approx. 333 g/11.7 oz.
Specifications Power supply/other Battery life • Battery type: NP-W126S • Photographs: The number of frames varies with the option selected for PERFORMANCE: PERFORMANCE LCD EVF HIGH PERFORMANCE Approx. 260 Approx. 260 STANDARD Approx. 350 Approx. 350 • Movies: The length of footage that can be recorded varies with the movie mode: Continuance Actual Battery life Battery life of Mode of movie capture movie capture U Approx. 50 minutes Approx. 70 minutes i Approx. 60 minutes Approx.
Wireless transmitter Standards IEEE 802.11b/g/n (standard wireless protocol) Operating frequency • U. S. A., Canada, Taiwan: 2,412 MHz–2,462 MHz (11 channels) • Other countries: 2,412 MHz–2,472 MHz (13 channels) Access protocols Infrastructure NP-W126S rechargeable battery Nominal voltage 7.2 V Nominal capacity 1260 mAh Operating 0 °C to +40 °C/ temperature +32 °F to +104 °F Dimensions 36.4 mm × 47.1 mm × 15.7 mm/ 1.4 in. × 1.9 in. × 0.6 in. (W × H × D) Weight Approx. 47 g/1.7 oz.
Specifications BC-W126 battery charger Rated input 100 V – 240 V AC, 50/60 Hz Input capacity 13 –21 VA Rated output 8.4 V DC, 0.6 A Supported batteries NP-W126S rechargeable batteries Charging time Approx. 150 minutes (+20 °C/+68 °F) Operating 5 °C to +40 °C/ temperature +41 °F to +104 °F Dimensions 65 mm × 91.5 mm × 28 mm/ 2.6 in. × 3.6 in. × 1.1 in., excluding projections (W × H × D) Weight Approx. 77 g/2.7 oz. Weight and dimensions vary with the country or region of sale.
MEMO 332
MEMO 333
MEMO 334
MEMO 335
