Operation Manual

To record raw, unprocessed data from the camera image sensor, select a [RAW] option for image

quality in the shooting menu as described below. JPEG copies of RAW images can be created using

the [RAW CONVERSION] option in the playback menu, or RAW images can be viewed on a

computer using optional [RAW FILE CONVERTER] software.

Press [MENU/OK] in shooting mode to display the shooting menu. Press the selector up or

down to highlight [IMAGE QUALITY] and press [MENU/OK].

Highlight an option and press [MENU/OK]. Select [RAW] to record only RAW images, or

[FINE+RAW] or [NORMAL+RAW] to record both JPEG copy together with the RAW images.

[FINE+RAW] uses lower JPEG compression ratios for higher-quality JPEG images, while

[NORMAL+RAW] uses higher JPEG compression ratios to increase the number of images

that can be stored.

The Function Buttons

To toggle RAW image quality on or oﬀ for a single shot, assign [RAW] to a function button. If

a JPEG option is currently selected for image quality, pressing the button temporarily selects

the equivalent JPEG+RAW option. If a JPEG+RAW option is currently selected, pressing the

button temporarily selects the equivalent JPEG option, while if [RAW] is selected, pressing the

button temporarily selects [FINE]. Taking a picture or pressing the button again restores the

previous setting.