Operation Manual

Press [MENU/OK]. The dialog shown below will be displayed; use the selector to fine-tune
white balance and press [MENU/OK] to select, or press [DISP/BACK] to exit without
fine-tuning.
3
.
Results vary with shooting conditions. Play pictures back after shooting to check colors.
Custom White Balance
Color Temperature
Choose to adjust white balance for unusual lighting conditions. White balance measurement
options will be displayed; frame a white object so that it fills the display and press the shutter
button all the way down to measure white balance (to select the most recent custom value and exit
without measuring white balance, press [DISP/BACK], or press [MENU/OK] to select the most
recent value and display the fine-tuning dialog).
If “COMPLETED!” is displayed, press [MENU/OK] to set white balance to the measured
value.
If “UNDER” is displayed, raise exposure compensation and try again.
If “OVER” is displayed, lower exposure compensation and try again.
[WHITE BALANCE]
- 152 -