Operation Manual

[POWER SAVE]
[HIGH PERFORMANCE]
Adjust power management settings.
[AUTO POWER OFF]
[QUICK START MODE]
[POWER MANAGEMENT]
Choose the length of time before the camera turns off automatically when no operations are
performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off
manually. Note that in some situations the camera turns off automatically even when [OFF] is
selected.
Allow the camera to restart in a fast manner after turned off ([ON/OFF]).
If [ON] is selected, the camera will continue to draw a small amount of current from the
battery even when off. Quick start mode is cancelled automatically if no operations are
performed for about 20 minutes.
Optimize camera performance for increased battery life or display quality.
Reduces display refresh rate. The display dims to save power if no
operations are performed for a short period, but can be restored
by operating camera controls. Select this option to save power.
Choose for a brighter display and faster focus.
[POWER MANAGEMENT]
- 221 -