Operation Manual

To show pictures to a group, connect the camera to a TV using an HDMI cable (available
separately from third-party suppliers; note that the TV can only be used for playback, not
shooting).
Turn the camera off.
1.
Connect the cable as shown below.
Insert into Micro HDMI connector
Insert into HDMI connector
Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
Be sure the connectors are fully inserted.
2.
Tune the television to the HDMI input channel. See the documentation supplied with the
television for details.
3.
Turn the camera on and press button. The camera monitor turns off and pictures and
movies are played back on the TV. Note that the camera volume controls have no effect
on sounds played on the TV; use the television volume controls to adjust the volume.
The USB cable can not be used while an HDMI cable is connected.
Some televisions may briefly display a black screen when movie playback begins.
4.
Viewing Pictures on TV
- 245 -