Operation Manual

Power and Battery
Menus and Displays
Shooting
Playback
Connections/Miscellaneous
Problem Solution
The camera does
not turn on.
The zoom ring (ON/OFF switch) is not correctly rotated: Rotate the zoom
ring to [OFF] and then rotate the zoom ring again to the point between
28 and 112.
The battery is exhausted: Charge the battery or insert a fully-charged
spare battery.
The battery is inserted incorrectly: Reinsert in the correct orientation.
The battery-chamber cover is not latched: Latch the battery-chamber
cover.
The camera was turned on immediately after having been turned off:
Press the shutter button halfway.
The battery runs
down quickly.
The battery is cold: Warm the battery by placing it in a pocket or other
warm place and reinsert it in the camera immediately before taking a
picture.
There is dirt on the battery terminals: Clean the terminals with a soft,
dry cloth.
[HIGH PERFORMANCE] is selected for [POWER MANAGEMENT]:
Select [POWER SAVE] to reduce the drain on the battery.
is selected for shooting mode: Select mode to reduce the drain
on the battery.
[TRACKING] is selected for [AF MODE]: Select a different AF mode
[C] is selected for focus mode: Select a different focus mode.
The battery has been charged many times: The battery has reached the
end of its charging life. Purchase a new battery.
Troubleshooting/FAQ
- 257 -