Owner's Manual

vii
Waterproof and Dustproof
What You Should Remember After Using the Camera
Be sure to wipe any dirt or sand o the
waterproof sealing material or its contacting
surface. Dirt or sand may scratch the material
or the surface, making the camera less resistant
to water.
To wash sand, dirt or dust o the camera, rinse
it under running tap water or soak it in a bowl
of fresh water for 2 or 3 minutes.
Do not use any soapy water, mild detergents,
alcohol or similar liquids to clean the camera.
They may make the camera less resistant to
water.
After using the camera, wipe any water or
dirt o the camera with a dry cloth, close the
battery-chamber cover securely, and then soak
the camera in fresh water for 10 minutes. Next,
dry the camera completely.
Storage and Care
Do not leave the camera in a location where
the temperature is 40°C (104°F) or higher, or 0°C
(3F) or lower.
The waterproof sealing material is replaceable
at cost. The material should be replaced once a
year to maintain the camera’s water resistance.
For details, contact the store where you
purchased the camera, or our Repair Service.