BT-101 Instructions guide Keys and parts The headset contains several technological features to improve the experience of the user.
Before using the headset, you must fully charge the battery and connect the headset to your respective Bluetooth device. HOW TO CHARGE THE BATTERY The headset contains a battery capable of up to 10 hours of usage. To charge the battery, remove the charging cover on remote control to expose the micro-USB port. Plug the USB cable into the headset and the charging source to begin charging. The LED indicator will show a constant red light when charging.
When setting the headset for pairing mode, make sure the headset is off. Press and hold the Multi-function button for 3 seconds until the headset is turned on. After the headset is turned on, it will enter pairing mode automatically. Blue LED pulsing will be displayed in pairing mode with 2 seconds interval. On your respective device you should search for the signal and use the device's functions to connect. On the list of found devices you select "BT-101" to establish the connection.
CONTROL FUNCTIONS Function Turn on/off Action Press and hold (3 sec) Multi-function button until the BLUE LED fade in/ fade out.
The following section contains information regarding safety warnings, requirements and statements. Please read and understand thoroughly before using the headset. Safety requirements Heed all warnings Keep and follow all instructions. The operating temperature range in user manual: from 0 degree Celsius to 45 degree Celsius. DO NOT use this apparatus near water Clean only with dry cloth DO NOT disassemble or replace the battery.
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
