Data Sheet

FUJIKURA 80S PLUS FUSION SPLICER

Go4Fiber Ltd.

Tel: +852 2174-1338 Fax: +852 2904-0034

Email: sales_group@go4fiber.com Web: www.go4fiber.com

Splice Products

Fujikura 80S + is the new standard core alignment fusion splicer covering varied splicing

needs in those fields with a series of innovative features, such as automated wind

protector / tube heaters, 6 seconds splicing and 9 seconds tube heating, ruggedized body,

improved carrying case, wireless communication functions, etc. They are all for great

splicing efficiency.

Features:

 Core-to-Core Alignment

 Splicing 6sec, Tube-heating 9sec

 Automated Wind-Protector

 Minimum manual operation, Splice in 4 steps

 Multi-functional carrying case with integrated work station

 Absolute robustness

 Bluetooth capability connection

PAGE 1
FUJIKURA 80S PLUS FUSION SPLICER 01 Splice Products Fujikura 80S + is the new standard core alignment fusion splicer covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 6 seconds splicing and 9 seconds tube heating, ruggedized body, improved carrying case, wireless communication functions, etc. They are all for great splicing efficiency.
PAGE 2
FUJIKURA 80S PLUS FUSION SPLICER Specifications: ITEM SPECIFICATIONS SM(ITU-T G.652 / G.657), MM(ITU-T G.651), DS(ITU-T G.653), Applicable type of fibers NZDS(ITU-T G.655) and other single mode fibers Fiber count Single Cladding diameter : 80 to 150µm Applicable fiber dimensions 02 Coating diameter : 100 to 3000µm Cleave length 5mm to 16mm with sheath clamp Splicing mode / Heating mode Total 100 splice modes / 30 heating modes Typical splice loss 0.02dB with SM, 0.01dB with MM, 0.