Core Alignment Fusion splicer 90S+ kit ACTIVE BLADE ACTIVE FUSION MANAGEMENT TECHNOLOGY CONTROL TECHNOLOGY Enhanced Splice Quality
Active Fusion Control Technology 2. Active Fusion control by fiber brightness ACTIVE FUSION Fusion is easily affected by changes in the environment. The 90S+ uses real-time fusion parameter control by analyzing the fiber’s brightness intensity during fusion. It contributes to stable, reduced splice loss. CONTROL TECHNOLOGY 1. Active Fusion control by cleave condition One of main causes of high splice loss is bad cleave end face.
Active Blade Management Technology ACTIVE BLADE MANAGEMENT TECHNOLOGY 2. Active Blade life management The 90S+ displays the remaining blade life and informs the user when a blade height change, position change, or new blade is required. 1. Active Blade rotation by motor The 90S+ and CT50 fiber cleaver are enabled with wireless data connectivity. This capability allows automatic cleaver blade rotation when the 90S+ judges the blade is worn. The 90S+ can connect to two CT50s simultaneously.
Enhanced Splice Quality The below graphs show the number of cleaves on the horizontal line with frequency of large cleave angle, bad cleave shape and no cleave at all. When the frequency of large cleave angle increases, Active Blade Management Technology can detect this increasing ratio point and rotate the blade position automatically.
Operation Time Reduction 1. Automatic Open-Close Wind protectors The faster automated features of the 90S+ reduce installation times. With this splicer, an operator can complete the entire splice process from splicing to heating without touching the 90S+ and only moving the fiber. 3. Fiber retention clamp The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out.
User Friendly 1. Carrying Case 2. Work Tray There are multiple ways to utilize the 90S carrying case. The 90S+ is ready to use just by opening the case, but it is also possible to use the 90S+ on top of the carrying case or only with the work tray depending on the work environment. The work tray has many functions. There are two drawers for storage which are large enough to store tools or battery packs. Also, the work tray can be divided in two, so it is configurable to fit your work space.
User Friendly 3. Loose tube Compatibility The sheath clamp of the 90S+ is compatible with loose tube fiber. The Protrusion part on of the sheath clamp for loose tube fiber engages or retracts by simply changing the switch position with your finger. 4. Tool-less Electrodes and illumination The 90S+ electrodes come as an “assy” including the fixing screw. You can rotate the screw by hand without tools, enabling easy electrode replacement.
Standard Package 90S+ Standard Package Description Model No.
Specifications 90S+ Specifications Item Fiber alignment method Fiber count can be spliced Applicable fiber Applicable coating Fiber splice performance Fiber type Cladding dia. Sheath clamp Splice loss *2 Splice time *3 Applicable protection sleeve Sleeve heat performance Fiber tensile test force Electrode life *5 Physical description Sleeve type Sleeve length Sleeve dia.
Specifications CT50 Options CT50 Specifications Item Applicable fiber Applicable coating Fiber type Fiber count Cladding dia.
