User Manual

27
You may charge the batteries while the
M200 is switched on or off by attaching
an AC power adapter.
• Plug the AC adapter/charger into a
standard wall outlet.
• Connect the AC adapter/charger to the
Power port located on the M200 side
panel.
• The [AC/Charger] indicator on the side
panel will turn on- Red
• Charge batteries until the [AC/Charger]
indicator turns Green.
Recharging Batteries
Repair and Calibration
View Version
Information
• From the General Menu, use the UP/
Down arrow keys to highlight the [View
Version Information…] parameter.
• Press the [Select] key to enter the
Version Information Screen.
Note: It is helpful to have the M200
version number if you need to contact
Noyes Customer Service or Technical
Support.
Unauthorized repair of the Noyes test
equipment will void the warranty.
Calibration is recommended every 12
months. Noyes’ Calibration department
is in compliance with ANSI/NCSL Z540-
1, ISO 10012-1, MIL STD 45662A, ISO
Guide 25 and traceability to the National
Institute of Standards and Technology.
Call Customer Service to obtain a Service
Request (SR) Number before sending units
in for calibration.
You may call Noyes Customer Service
between 8 AM and 5PM, United States
Eastern Time.
Phone [phone]
603-528-7780
Fax [phone]
Web www.Afltele.com
(select Noyes Test & Inspection,
and then click on Tech Support)
Contact us