BL00005042-100 防抖望远镜 BINOCULAR TECHNO-STABI 日本語 1440 ENGLISH DEUTSCH 取扱説明書 Instruction manual Bedienungsanleitung Mode d’emploi Manual de instrucciones 使用说明书 FRANÇAIS ESPAÑOL 中文简 Worldwide Network 製品を使用する前にこの取扱説明書をよく読んで、安全な場所に保管してください。 Read these instructions thoroughly before using the product and then them store in a safe place. Lesen Sie diese Anweisungen sorgfältig durch, bevor Sie das Produkt verwenden, und bewahren Sie sie an einem sicheren Ort auf.
Before You Begin A B C Check that the package contains all the supplied accessories listed below. Read “For Your Safety” to ensure safe operation. Read this manual thoroughly before using the product.
Specifications Magnification 14× Effective objective lens diameter 40 mm (1.6 in.) Actual field of view 4° Field of view at 1000 m (1094 yds) 70 m (230 ft) Minimum focusing distance 5 m (16 ft) Exit pupil diameter 2.86 mm (0.11 in.) Eye relief 13 mm (0.5 in.) Image stabilization ± 6° Diopter adjustment (right eyepiece) ± 2 m-1 Eye width adjustment 60–70 mm (2.4 – 2.8 in.) Dimensions (L × W × H) 187 × 165 × 81 mm (7.4 × 6.5 × 3.2 in.
For Your Safety • Although this product is designed with safety in mind, we ask that you read and observe the following safety precautions. • Keep this manual where it will be seen by all who use the product. d WARNINGS Failure to observe warnings could result in death or serious injury. d CAUTIONS Failure to observe cautions could result in injury or property damage. dWARNINGS • Never use the binoculars to look at the sun. Doing so could cause blindness.
• Operators could pinch their fingers when adjusting eye width. Observe caution when allowing small children to use the product. • Do not leave the product in direct sunlight. Failure to observe this precaution could result in fire. • Deterioration of the rubber eyecups as the result of prolonged use could cause inflammation of the skin. Consult a physician should experience symptoms that could be the result of inflammation. • Consult a physician immediately should a child swallow a cap.
dCAUTIONS • In the event of product malfunction, do not attempt to repair the product yourself. Consult the original retailer. • Should the product break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in injury. • Do not touch the interior of the battery chamber with metal objects. Failure to observe this precaution could result in injury or product malfunction.
For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Disposal of Electrical and Electronic Equipment in Private Households In the European Union, Norway, Iceland and Liechtenstein: This symbol on the product, or in the manual and in the warranty, and/ or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
Parts of the Binoculars Image stabilizer switch Eye-width indicator Image stabilizer LED Power LED Power switch Eyepieces Eyecups Diopter adjustment control Focus control Strap attachment point Objective lenses Open AA batteries Battery chamber ENGLISH Battery chamber latch Bottom view EN-8
Using the Binoculars the battery-chamber latch to the left, remove the battery chamber, 1 Rotate and load the batteries. Reinsert the battery chamber and latch it by rotating the latch to the right. the eye height by rotating the eyecups. Retract the eyecups if you 2 Adjust wear glasses and extend them if you do not. the power switch. The system will start up and the power LED will 3 Press light. If the power LED flashes, the batteries are low and must be replaced. the image stabilizer switch.
Other Precautions for Use • Although the product is water resistant, leaving water, dust, sand, or other foreign matter on the product could cause it to malfunction. To remove seawater or dirt, first check that the battery chamber is securely latched, then rinse the product under a slow trickle of water from a tap or wash it gently in a basin of fresh water. After washing the product, remove any water droplets with a soft, dry cloth, and then leave the product to dry in a shady, wellventilated area.