User's Manual

C-17
Command
Sets
User's Manual
COMMAND SETS
This section describes the printer commands for the IBM Proprinter XL24E
emulation. Asterisks in the “Function” column indicate extended
commands that are not supported by the original printer.
IBM PROPRINTER XL24E
EMULATION
Function Command
Print Mode Control
Double-strike (bold) printing on ESC G
Double-strike (bold) printing off ESC H
Emphasized (shadow) printing on ESC E
Emphasized (shadow) printing off ESC F
One-line double-width characters on SO or ESC SO
One-line double-width characters off DC4
Double-width characters on/off ESC W (n)
(on: n = 1, off: n = 0)
Double-height/double-width characters ESC [ @ (n
1
) (n
2
)
n
1
= 4, n
2
= 0, m
1
= 0, m
2
= 0 (m
1
) ... (m
4
)
m
3
controls character height and line
spacing:
m
3
Height Spacing
0 Unchanged Unchanged
1 Normal Unchanged
2 Double Unchanged
16 Unchanged Single
17 Normal Single
18 Double Single
32 Unchanged Double
33 Normal Double
34 Double Double
m
4
controls character width:
m
4
Width
0 Unchanged
1 Normal
2 Double