User's Manual
Table Of Contents
- QUICK REFERENCE
- CHAPTER 1 INTRODUCTION
- CHAPTER 2 SETTING UP
- CHAPTER 3 PAPER HANDLING
- CHAPTER 4 PRINTING
- CHAPTER 5 USING SETUP MODE
- HOW TO USE THIS CHAPTER
- ENTERING SETUP MODE
- OVERVIEW OF SETUP MODE
- PRINTING A LIST OF SELECTED OPTIONS
- DECIDING WHICH OPTIONS TO CHANGE
- CHANGING MENU1 AND MENU2 OPTIONS
- CHANGING HARDWARE OPTIONS
- CHANGING PRINT POSITION ADJUSTMENT OPTIONS
- CHANGING CONFIGURATION OPTIONS
- EXITING AND SAVING
- RESETTING DEFAULTS
- USING THE DIAGNOSTIC FUNCTIONS
- SETUP MODE REFERENCE
- ONLINE SETUP MODE
- CHAPTER 6 MAINTENANCE
- CHAPTER 7 TROUBLE-SHOOTING
- APPENDIX A SUPPLIES AND OPTIONS
- APPENDIX B PRINTER AND PAPER SPECIFICATIONS
- CHAPTER C COMMAND SETS
- APPENDIX D INTERFACE INFORMATION
- APPENDIX E CHARACTER SETS
- CHARACTER SETS 1 AND 2 (DPL24C PLUS AND IBM XL24E EMULATION)
- ITALIC AND GRAPHICS CHARACTER SETS (ESC/P2 EMULATION)
- NATIONAL CHARACTER SETS (ALL EMULATIONS)
- NATIONAL CHARACTER SETS (DPL24C PLUS AND IBM XL24E EMULATION)
- NATIONAL CHARACTER SETS (ESC/P2 EMULATION)
- NATIONAL CHARACTER SETS AND SUPPORTED RESIDENT FONTS (ALL EMULATIONS)
- APPENDIX F RESIDENT FONTS
- GLOSSARY OF TERMS
C-19
Command
Sets
User's Manual
COMMAND SETS
Function Command
Change graphics line spacing base to ESC [ \ (m
1
) (m
2
)
1/216 or 1/180 inch (for ESC J and ESC 3) (t
1
) ... (t
4
)
m
1
= 4, m
2
= 0
0 - t
1
- 255, 0 - t
2
- 255, t
3
= 0
t
4
= 180 or 216
Tabulation
Horizontal tab execution HT
Set horizontal tabs ESC D (n
1
) ...
The values of n
1
to n
k
in this command (n
k
) NUL
are the ASCII values of the print columns
(at the current character width) at which
tabs are to be set. (1 - n - 255) (1 - k - 28)
Clear all horizontal tabs ESC D NUL
Move print position right by n/120 inch ESC d (n
1
)
(n
2
)
(0 - n
1
, n
2
- 255) (n = n
1
+ n
2
¥ 256)
Vertical tab execution VT
Set vertical tabs ESC B (n
1
)...
The values of n
1
to n
k
in this command (n
k
) NUL
are the ASCII values of the lines (at the
current line spacing) at which tabs are to be
set. (1 - n - 255) (1 - k - 64)
Clear all vertical tabs ESC B NUL
Reset tabs to default values ESC R
Page Formatting
Set left margin at column n and right ESC X (n) (m)
margin at column m (0 - n, m - 255)
Set perforation skip by n lines ESC N (n)
(1 - n - 255)
Perforation skip off ESC O
Set page length to n lines (1 - n - 255) ESC C (n)
Set page length to n inches (1 - n - 22) ESC C NUL (n)
Set top of form ESC 4