User's Manual

SETTING UP
User's Manual 2-9
4. Remove the ribbon cartridge from its package. Push in the two
ribbon release tabs. The tabs snap into the cartridge and the ribbon
feed mechanism engages.
Turn the ribbon feed knob clockwise to be sure that it feeds
properly.
Preparing the ribbon cartridge
5. Locate the two ribbon release levers on either side of the ribbon
cartridge. Each ribbon release lever has a mounting pin on the side.
Place the mounting pins on the ribbon support bracket of the print
head cartridge. Insert the ribbon so that the ribbon falls between the
nose of the print head and the plastic print guide.
Installing the ribbon cartridge