User's Manual

USING SETUP MODE
5-32 User's Manual
Table 5.5 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
Options Description
<PROTOCL> Indicates data transmission protocol.
XON/XOF The DC1 and DC3 codes are used.
DTR The Data Terminal Ready signal is used.
REV-CHL The Reverse Channel signal is used.
<DSR> IGNORE DSR is ignored by the printer.
DETECT DSR is detected by the printer.
<DUPLEX> FULL
Simultaneous data transmission occurs in
opposite directions.
HALF
Data transmission occurs in either direction,
but not simultaneously.
<CTS> IGNORE CTS is ignored by the printer.
DETECT CTS is detected by the printer.
<CD> IGNORE CD is ignored by the printer.
DETECT CD is detected by the printer.
<==END==>
Indicates the end of the HARDWRE item
list. Press the
button to print the first item,
which is <PPR-OUT>.
Press the
button to print the previous item.
Press the ONLINE button to reprint the
<<FUNCTION>> menu.