User's Manual

USING SETUP MODE
User's Manual 5-39
• Tear off for continuous forms
• Auto loading of single sheets
• Direct decoding of certain commands
• Enabling of the AREA OVER indicator
Table 5.6 describes the CONFIG items and options. Items are listed in
the order they are printed. The procedure for changing the configuration
options is described after Table 5.7.
Table 5.7 CONFIG Items and Options
NOTE: Underlined options are the factory defaults.
CONFIG
Items
Options Description
<TEAROFF> Auto or manual tearoff feed.
MANUAL
Automatic tearoff feed is invalid, and
tearoff feed must be done using the
TEAR OFF button.
AUTO
Automatic tearoff feed is valid but only
for continuous forms. Tearoff feed can
also be done using the TEAR OFF
button.
CHANGING
CONFIGURATION
OPTIONS