User's Manual

INTRODUCTION
User's Manual 1-3
• Power Supply type; 100-120VAC input (M33325A)
220-240VAC input (M33325B)
• Interface type; Centronics parallel + USB interfaces
Centronics parallel + RS232C serial interface
• Control panel type; LED type.
LCD type.
Printer add-on options are listed below. For details, see Chapter 8.
• Cut sheet feeder. The SF940 single-bin feeder is available as an
option. Two cut sheet feeders can be installed in front of and behind
the printer at the same time. A cut sheet feeder allows single cut
sheets and multiple-part cut sheets to be fed automatically.
• Tractor unit. A second tractor unit may be bought as an additional
option if dual tractor feeding capability is required.
• LAN card. A LAN card is available as a printer add-on option. A
user installable function, the LAN card can be installed only on
printer models with the Centronics parallel + USB interfaces. For
details, see Chapter 8.
OPTIONS of DL7600 dot matrix printer
MODELS
OPTIONS
SF940 single-bin feeder (front）.
SF940 single-bin feeder (rear）.
Tractor unit (rear)
Slot for LAN card is available.
(Centronics parallel + USB interfaces MODEL)
Replacing soundproof cover with paper table is
required when SF940 is installed in front side.
Replacing stacker with large stacker is required
when SF940 is installed in rear side.