User's Manual

USING SETUP MODE

User's Manual 5-11

Transition of LCD SETUP MODE

Setup Mode Example (LCD)

To become familiar with setup mode, try the following example. This

example shows how to change the Emulation in MENU2 to ESC/P2.

1. Press the ONLINE button to place the printer online.

2. Press the SETUP button to enter select menu. Then following

message is displayed.

3. Press button until following message is displayed.

4. Press buttons to move to lower layer. Then following

message is displayed.

5. Press , to choose Items in this layer.

6. Press buttons to move to lower layer. Then following

message is displayed.

7. Press , to choose Options in this Item.

8. Press SELECT button to select displayed option. Then “＊” is

applied to a selected option (not saved yet).

7. Press SAVE/EXIT buttons to register selected option on

printer’s permanent memory.

6. Press to finish.

SETUP MODE

MENU1

SETUP MODE

MENU2

EMULATE

MENU2

EMULATE

*DPL24C+

EMULATE

ESC/P2

EMULATE

*ESC/P2

:SAVE :CANCEL