User's Manual

USING SETUP MODE
User's Manual 5-31
Table 5.5 HARDWARE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWARE
Items
Options Description
<PRT-DIR> BI-DIR Bidirectional printing. The printer prints in
either direction while seeking the next print
direction for a shorter print time.
UNI-DIR Unidirectional printing. Unidirectional
printing is used for printing vertical lines in
tables even if vertical alignment is not
adjusted. Unidirectional printing is slower
than bidirectional printing.
<BUZZER> Enables or disables the printer status buzzer.
ON Buzzer on (recommended).
The printer beeps to indicate paperout or
other conditions.
ON-1 Buzzer on (Low quality)
Sound in bass (Low frequency sound)
ON-2 Buzzer on (High-quality sound)
Sound in high-pitched tone (High frequency
sound)
OFF Buzzer off under any conditions.
<WORD-LG> To determine the required word length, refer
to your computer documentation. Select 8-
BIT to print bit image graphics.
8 BIT 8-bit word length (used by most computers)
7 BIT 7-bit word length (MSB = 0)