User's Manual

USING SETUP MODE
User's Manual 5-33
Table 5.5 HARDWARE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWARE
Items
Options Description
<STANDBY> ## MIN 1, 3, 5, 10, 20 or 30 MIN
Time until shifting to the power saving mode
is set.
<INTRFCE> Selects the type of the interface to the
computer.
PARALEL Centronics parallel interface
SERIAL RS-232C serial interface
USB USB interface
AUTO-2S Auto interface selection mode
AUTO-4S
AUTO-6S
 Both interfaces are ready for
communication.
AUTO10S
AUTO15S
 Specify the timing regarding the selected
interface as being inactive.
AUTO20S To switch the interface to the optional LAN
interface, mount the LAN card with the setup
mode set to “AUTO-XS” or “AUTOXXS”
under “INTERFCE,” which in turn is under
“HARDWRE” The interface will
automatically switch to the optional LAN
interface.
To switch the interface to something other
than the optional LAN interface, do either of
the following:
 To return the setup mode to
“INTERFCE” under “HARDWRE,”
remove the LAN card.
 To switch the interface to a fixed
interface, set PARALEL,USB with the
LAN card mounted, and the setup mode
set to “INTERFCE” under
“HARDWRE.”