User's Manual

USING SETUP MODE
User's Manual 5-45
The CONFIG function defines the printer’s primary configuration. You
can set the following options to ensure that the printer meets your
requirements:
 Tear off for continuous forms
 Auto loading of single sheets
 Direct decoding of certain commands
 Enabling of the Area-over detection
Table 5.6 describes the CONFIG items and options. Items are listed in
the order they are printed. The procedure for changing the configuration
options is described after Table 5.7.
Table 5.7 CONFIG Items and Options
NOTE: Underlined options are the factory defaults.
CONFIG
Items
Options Description
<TEAROFF> Auto or manual tear off feed.
AUTO Automatic tear off feed is valid but only
for continuous forms. Tear off feed can
also be done using the TEAR OFF
button.
MANUAL Automatic tear off feed is invalid, and
tear off feed must be done using the
TEAR OFF button.
CHANGING
CONFIGURATION
OPTIONS