User's Manual

USING SETUP MODE
5-54 User's Manual
Table 5.7 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG
Items
Options Description
<CUTEDIR> Selection of the eject direction of cut
sheets with manually feeding of cut
sheets
FRONT Ejected to the front.
REAR Ejected to the rear.
<CSFEDIR> Selection of the eject direction of cut
sheets with use of a CSF
FRONT Ejected to the front.
REAR Ejected to the rear.
<CUTEJCT> Selection for automatic ejection of
cut sheets
AUTO Automatic ejection of cut sheets
when no cut sheet is detected
MANUAL No automatic ejection of cut sheets
when no cut sheet is detected
<FL-CENT>
Selection of the print carrier position
when paper is fed via a front path
(with feeding of continuous forms
paper from the front, use of a front
CSF, and manual feeding of cut
sheets)
POSN1
Position 1: Column 31
POSN2 Position 2: Column 42
<RL-CENT> Selection of the print carrier position
when paper is fed via a front path
(with feeding of continuous forms
paper from the rear and use of a rear
CSF)
POSN1 Position 1: Column 31
POSN2 Position 2: Column 42