User's Manual

USING SETUP MODE
5-56 User's Manual
Table 5.7 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG
Items
Options Description
<CSF-LD> Selection of the method of feeding
from the CSF
NORMAL Feeds paper directly from the CSF
hopper.
SWBACK Feeds paper from the CSF hopper to
either the Paper table used with a
front CSF or the stacker used with a
rear CSF. Then, that paper is fed
again.
<CSFAPTC> Paper thickness detection with use of
a CSF
NORMAL Sheet of paper that is fed immediately
after the feed bin is switched
ALWAYS Every sheet of paper that is fed
<LF-CTL> Selection for LF mode
PRCISIN Precision is the first priority.
SPEED Speed is the first priority.
<PR-MODE> Selection for print mode
(standard/hi speed/low noise)
NORMAL Prints in standard mode.
HISPEED Prints in hi-speed mode.
QUIET Prints in low-noise mode.
<HI-IMPT> Selection for high printing pressure
mode
ENABLE Prints in high impact mode.
DISABLE Prints in standard impact mode.